{"product_id":"victron-energy-gx-io-extender-150","title":"Victron Energy GX IO-Extender 150","description":"\u003ch2\u003eThe Victron Energy GX IO-Extender 150 Gives Your GX Device More Ways to Sense, Signal, and Automate\u003c\/h2\u003e\n\u003cp\u003eThe Victron Energy GX IO-Extender 150 is a USB-connected expansion module that adds extra input and output ports to a GX device such as the Ekrano GX or Cerbo GX. It is built for installers, system designers, and hands-on DIYers who want their Victron system to watch more sensors, trigger more alarms, and run more automation than the built-in ports allow. If your GX device is the brain of your power system, think of this Victron GX IO-Extender as extra nerve endings.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eVictron Energy GX IO-Extender 150 Features\u003c\/h3\u003e\n\u003ch4\u003eUSB Connection For Plug-And-Play Expansion\u003c\/h4\u003e\n\u003cp\u003eYou plug the GX IO-Extender 150 into an available USB port on your GX device, and the new inputs, outputs, PWM channels, and relays show up in the system. The same USB connection powers the module, so there is no separate power supply to wire. Idle consumption is under 100 mW, with a maximum of 1 W.\u003c\/p\u003e\n\u003ch4\u003eEight Digital I\/Os So You Can Monitor Or Signal More Equipment\u003c\/h4\u003e\n\u003cp\u003eThe eight digital I\/Os are split into two groups of four. A DIP switch sets each group as inputs or outputs, so you can run 8 inputs, 8 outputs, or 4 of each. Any change to the DIP switches requires a power cycle to take effect.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInputs accept 3.8 to 5.5 V\u003c\/li\u003e\n\u003cli\u003eOutputs are 5 V at 4 mA maximum\u003c\/li\u003e\n\u003cli\u003eIsolated from USB\u003c\/li\u003e\n\u003cli\u003eRated for up to 5.5 V, and overvoltage can cause permanent damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDigital inputs can be assigned a function in the GX device settings. The supported types are door alarm, bilge pump, bilge alarm, burglar alarm, smoke alarm, fire alarm, CO2 alarm, generator, and pulse meter.\u003c\/p\u003e\n\u003ch4\u003eFour PWM Outputs For Dimming And Device Regulation\u003c\/h4\u003e\n\u003cp\u003eThe four PWM channels output 0 to 5 V with 8-bit precision. Victron lists LED dimming and motor speed control as suitable uses. Each channel gets its own state and dimming value, so you can fine-tune a connected device from the GX interface or from Node-RED.\u003c\/p\u003e\n\u003ch4\u003eTwo Latching Relays That Keep Their Position\u003c\/h4\u003e\n\u003cp\u003eThe two potential-free bistable relays hold their position even if power is lost. A short pulse moves them between positions A and B, and they use no power to stay there. An LED shows the active position: blue for A, orange for B. That makes them handy for swapping between two indicator lights or running a siren with an \"all OK\" light.\u003c\/p\u003e\n\u003ch4\u003eA Solid Switch For Low-Current DC Signaling\u003c\/h4\u003e\n\u003cp\u003eThe solid switch has no mechanical contacts and switches the positive side of a DC circuit. It is rated for a maximum battery voltage of 70 VDC and a maximum load current of 4 A.\u003c\/p\u003e\n\u003ch4\u003eNode-RED And Switch Pane Control For Flexible Automation\u003c\/h4\u003e\n\u003cp\u003eYou can control the module from the Switch pane in the GX user interface or build automation logic in Node-RED. The GX IO-Extender 150 works with all GX devices, but Victron notes that Node-RED is not supported on every GX model. Check the Venus OS Large documentation for your device.\u003c\/p\u003e\n\u003ch4\u003eStatus LEDs And Compact Mounting For Simple Installs\u003c\/h4\u003e\n\u003cp\u003eEvery port has a blue or orange LED showing its current state, which makes troubleshooting less of a guessing game. The enclosure measures 123 x 67 x 23 mm and mounts to a wall or to a DIN rail with an adapter accessory. The operating temperature range is -20 °C to +50 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eReal-World Applications\u003c\/h3\u003e\n\u003cp\u003eThe GX IO-Extender 150 is a signaling and automation tool, so it earns its keep in systems where a GX device already sits at the center. Victron points to off-grid solar installations, marine electrical systems, and industrial backup power setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-grid solar and backup power:\u003c\/strong\u003e Use digital inputs to read a generator running signal or an alarm contact, then use relays or outputs to trigger a response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine systems:\u003c\/strong\u003e Assign inputs to bilge pump or bilge alarm functions, and use a latching relay to switch an alert light or siren.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote equipment and small business backup:\u003c\/strong\u003e Add door, smoke, fire, burglar, or CO2 alarm inputs so your GX device can report more of what is happening on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom automation projects:\u003c\/strong\u003e Pair the PWM outputs and relays with Node-RED flows to dim, regulate, or sequence connected devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eHow It Compares To Typical Alternatives\u003c\/h3\u003e\n\u003cp\u003eA GX device has its own relays and I\/O, and for many systems that is plenty. The GX IO-Extender 150 is for when you run out of ports or want a different type. For example, its relays are bistable, so they hold position through a power loss. The relays on devices like the Cerbo GX are monostable and return to a default state.\u003c\/p\u003e\n\u003cp\u003eIt is not a replacement for a dedicated load-switching device. Victron states that the extender is meant for signaling rather than general load switching, because the relays and solid switch have low current ratings that vary with voltage. For general switching, Victron suggests compatible products from Energy Solutions (UK), Garmin (USA), Safiery, and others.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eIs The GX IO-Extender 150 A Good Fit For Your System\u003c\/h3\u003e\n\u003cp\u003eThis module suits people who already have a GX device and want to expand what it can sense and control. Before you buy, confirm a few things:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou have a compatible GX device with an available USB port. On some Cerbo GX models, the USB port closest to the HDMI port may not be suitable, so check your GX manual.\u003c\/li\u003e\n\u003cli\u003eIf you want Node-RED automation, your GX device supports it and runs the Venus OS Large image.\u003c\/li\u003e\n\u003cli\u003eYour connected devices stay within the digital I\/O, PWM, relay, and solid switch ratings.\u003c\/li\u003e\n\u003cli\u003eYou need a DIN-rail adapter if you want DIN-rail mounting. Confirm this accessory separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis may be a good fit if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are running out of I\/O on your GX device\u003c\/li\u003e\n\u003cli\u003eYou want alarm inputs for doors, bilges, smoke, fire, CO2, or a generator\u003c\/li\u003e\n\u003cli\u003eYou want relays that hold position through a power loss\u003c\/li\u003e\n\u003cli\u003eYou like building custom logic in Node-RED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch4\u003eDoes The GX IO-Extender 150 Work With Every GX Device?\u003c\/h4\u003e\n\u003cp\u003eVictron states it works with all GX devices, though it is best used with Node-RED, and Node-RED is not supported on all GX devices.\u003c\/p\u003e\n\u003ch4\u003eCan I Use It To Switch Heavy Loads?\u003c\/h4\u003e\n\u003cp\u003eNo. The relays, digital outputs, and solid switch are intended for signaling and carry low current ratings. Use a dedicated switching device for general load switching.\u003c\/p\u003e\n\u003ch4\u003eHow Is It Powered?\u003c\/h4\u003e\n\u003cp\u003eIt is powered by the USB connection to your GX device. Power consumption is under 100 mW at idle and a maximum of 1 W.\u003c\/p\u003e\n\u003ch4\u003eCan I Control It Without Node-RED?\u003c\/h4\u003e\n\u003cp\u003eYes. The extender can be controlled from the Switch pane in the GX device user interface, as well as through Node-RED.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Victron Energy GX IO-Extender 150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eAdd More Control To Your GX System With Outbound Power\u003c\/h3\u003e\n\u003cp\u003eA good power system keeps working in the background, and the right accessories make it easier to monitor and manage. The Victron Energy GX IO-Extender 150 gives your GX device more inputs, outputs, PWM channels, and relays in a compact USB-powered module. At Outbound Power, we help customers match the right components to the way they plan to use their systems. If you are building out a Victron setup, we are glad to be your knowledgeable partner.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eVictron Energy GX IO-Extender 150 Manuals\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0643\/9128\/2937\/files\/Victron_Energy_GX_IO-Extender_150_Manuals.pdf?v=1794373507\" title=\"Victron Energy GX IO-Extender 150 Manuals\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0643\/9128\/2937\/files\/Victron_Energy_GX_IO-Extender_150_Manuals_100x100.jpg?v=1794373449\" alt=\"Victron_Energy_GX_IO-Extender_150_Manuals\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: left;\"\u003eVictron Energy GX IO-Extender 150 Datasheet\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0643\/9128\/2937\/files\/Victron_Energy_GX_IO-Extender_150_Datasheet.pdf?v=1794373590\" title=\"Victron Energy GX IO-Extender 150 Datasheet\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0643\/9128\/2937\/files\/Victron_Energy_GX_IO-Extender_150_Datasheet_100x100.jpg?v=1794373575\" alt=\"Victron_Energy_GX_IO-Extender_150_Datasheet\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: left;\"\u003eVictron Energy GX IO-Extender 150 Dimension Drawing\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0643\/9128\/2937\/files\/Victron_Energy_GX_IO-Extender_150_Dimension_Drawing.pdf?v=1794373707\" target=\"_blank\" title=\"Victron Energy GX IO-Extender 150 Dimension Drawing\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0643\/9128\/2937\/files\/Victron_Energy_GX_IO-Extender_150_Dimension_Drawing_100x100.jpg?v=1794373689\" alt=\"Victron_Energy_GX_IO-Extender_150_Dimension_Drawing\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":67292226453753,"sku":"BPP900800150","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/9128\/2937\/files\/Victron_Energy_GX_IO-Extender_150.jpg?v=1794373287","url":"https:\/\/outboundpower.com\/products\/victron-energy-gx-io-extender-150","provider":"Outbound Power","version":"1.0","type":"link"}