{"product_id":"victron-energy-vecan-to-can-bus-bms-cable-type-a-18-m","title":"Victron Energy VE.Can to CAN-bus BMS Cable Type A 1.8 m","description":"\u003ch2\u003eConnect a Non-Victron Battery to Your Victron System With the Victron Energy VE.Can to CAN-bus BMS Cable Type A 1.8 m\u003c\/h2\u003e\n\u003cp\u003eThe Victron Energy VE.Can to CAN-bus BMS Cable Type A 1.8 m is a purpose-built communication cable for connecting a CAN-bus enabled battery from another brand to a Victron system. If you're building a backup power, RV, or off-grid setup around Victron equipment and a lithium battery that isn't made by Victron, this is the small cable that helps the two sides talk to each other. It's not glamorous, but it is the kind of part that can save a project from stalling out at the finish line.\u003c\/p\u003e\n\u003cp\u003eThis is a Victron BMS cable for system builders, installers, and confident DIYers who want their battery and their Victron gear working as one coordinated system rather than two strangers sharing a wall.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003eVictron VE.Can to CAN-bus BMS Cable Type A Features\u003c\/h3\u003e\n\u003ch4\u003eCAN-bus Connectivity For Pairing Non-Victron Batteries With Victron Systems\u003c\/h4\u003e\n\u003cp\u003eThe cable's job is simple to describe. It connects a CAN-bus enabled battery that isn't from Victron to a Victron system. The cable name tells you what's on each end: a VE.Can connection on the Victron side and a CAN-bus connection on the battery side.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for CAN-bus enabled batteries from other brands\u003c\/li\u003e\n\u003cli\u003eMade to link those batteries to a Victron system\u003c\/li\u003e\n\u003cli\u003eHelps keep a mixed-brand system practical and organized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eType A Design So You Can Match the Right Cable to the Right Battery\u003c\/h4\u003e\n\u003cp\u003eThis cable comes in two types, Type A and Type B. Which one you need depends on the brand of battery you're connecting. Victron publishes a BMS cable manual that lists which cable goes with which battery brand, so you can confirm the match before you buy instead of after you've opened the box. We think that's a far nicer way to spend an afternoon.\u003c\/p\u003e\n\u003ch4\u003e1.8 m Length For Flexible Placement\u003c\/h4\u003e\n\u003cp\u003eAt 1.8 meters, the cable gives you some room to work with when your battery and your Victron equipment aren't sitting shoulder to shoulder. Before ordering, measure your planned cable route, including any bends or tight spots, so the length suits your layout.\u003c\/p\u003e\n\u003ch4\u003eCompact Accessory Format For Easy Storage and Handling\u003c\/h4\u003e\n\u003cp\u003eThe product listing gives the weight as 0.2 lbs, so this is a light accessory that's easy to tuck into a toolkit or keep on hand as part of your system documentation and spare parts.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003eReal-World Applications\u003c\/h3\u003e\n\u003cp\u003eThe VE.Can to CAN-bus BMS cable fits any setup where a Victron system and a non-Victron CAN-bus battery need to be connected.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome backup power.\u003c\/strong\u003e Homeowners building a battery backup system around Victron equipment can use this cable when their chosen battery has CAN-bus communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRV travel.\u003c\/strong\u003e RVers who want to add a lithium battery from another brand to a Victron-based RV electrical system have one more connection to plan for, and this is it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-grid living and adventures.\u003c\/strong\u003e Cabins, remote homesteads, and off-grid builds often mix components from several brands. This cable helps bridge that gap on the battery communication side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobile businesses.\u003c\/strong\u003e Food trucks, mobile workshops, and service vehicles running Victron systems can use it when pairing a compatible third-party battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch3\u003eHow This Cable Compares to the Alternatives\u003c\/h3\u003e\n\u003cp\u003eThe most useful comparison is between Type A and Type B. Both connect non-Victron CAN-bus batteries to Victron systems, and the difference comes down to which battery brand you're using. Check Victron's BMS cable manual to find which type applies to your battery, then choose accordingly.\u003c\/p\u003e\n\u003cp\u003eIt's also different from a generic network or data cable. This cable is made specifically for the VE.Can to CAN-bus BMS connection, which is a good reason to reach for it rather than improvising. And if your battery doesn't have CAN-bus communication, or you're using a battery that is already part of the Victron lineup, this cable isn't the part you're looking for.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003eIs This Victron BMS Cable Right for You\u003c\/h3\u003e\n\u003cp\u003eThis cable is for you if you're connecting a non-Victron battery that has CAN-bus communication to a Victron system. The main thing to settle before purchase is compatibility. Check the battery brand against Victron's cable manual, since that's what determines whether you need Type A or Type B. Also confirm your battery's communication requirements with its manufacturer, and review your system's setup requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis May Be a Good Fit If\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou're using a CAN-bus enabled battery that isn't made by Victron\u003c\/li\u003e\n\u003cli\u003eYour system is built around Victron equipment\u003c\/li\u003e\n\u003cli\u003eThe cable manual points to Type A for your battery brand\u003c\/li\u003e\n\u003cli\u003eYou'd like a 1.8 m cable length for your layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch4\u003eWhat Does This Cable Connect?\u003c\/h4\u003e\n\u003cp\u003eIt connects a CAN-bus enabled battery that isn't from Victron to a Victron system.\u003c\/p\u003e\n\u003ch4\u003eHow Do I Know Whether I Need Type A or Type B?\u003c\/h4\u003e\n\u003cp\u003eBoth types exist, and the right one depends on your battery brand. Victron's VE.Can to CAN-bus BMS cables manual shows which cable to use for which brand. Check it before ordering.\u003c\/p\u003e\n\u003ch4\u003eCan I Use This Cable With a Victron Battery?\u003c\/h4\u003e\n\u003cp\u003eThis cable is intended for batteries that are not from Victron. If your battery is a Victron product, confirm the right connection method in its documentation.\u003c\/p\u003e\n\u003ch4\u003eHow Long Is the Cable?\u003c\/h4\u003e\n\u003cp\u003eThis version is 1.8 meters long.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Victron Energy VE.Can to CAN-bus BMS Cable Type A 1.8 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch3\u003eBuild a Cleaner Victron System With Outbound Power\u003c\/h3\u003e\n\u003cp\u003eGood power systems come together through the details: the right battery, the right controller, and the small connection that lets them cooperate. The Victron Energy VE.Can to CAN-bus BMS Cable Type A 1.8 m is one of those details, and getting it right up front helps your system run the way you planned for years to come. At Outbound Power, we focus on practical, well-matched power solutions for homeowners, RVers, off-grid adventurers, and mobile businesses. Check your battery brand against Victron's cable manual, add this cable to your cart, and let us help you keep the rest of your build moving.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":67292228026617,"sku":"ASS030710018","price":14.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/9128\/2937\/files\/Victron_Energy_VE.Can_to_CAN-bus_BMS_Cable_Type_A_1.8_m.webp?v=1794211246","url":"https:\/\/outboundpower.com\/products\/victron-energy-vecan-to-can-bus-bms-cable-type-a-18-m","provider":"Outbound Power","version":"1.0","type":"link"}