Found the same price or less? Just ask & we'll beat it.
Authorized AIMS Power Dealer
Friendly Lifetime Support
The AIMS Power Single Pole Mount Rack for Heavy Duty Solar Panels holds up to six large PV panels, up to 2.0 kW, on a single structural grade steel pole. Built from corrosion resistant galvanized steel with aluminum clamps and HD rails plus stainless steel hooks and hardware, it is designed for residential, farm, commercial and open area installations. The rack installs quickly with splicing kits, easy to use clamps and universal HD sliding rails, adjusts to four tilt angles with a U bolt and pitman arm, and is rated for wind speeds up to 102 mph. Everything needed for installation is included except the concrete foundation that anchors the pole.
The rack holds up to six large panels of 265 watts or larger, up to 2.0 kW. AIMS Power notes it can hold more panels depending on panel size, since the rails and pole are 126" long. It works with 60, 72 and 96 cell panels from all brands in portrait orientation.
Beams and pole conform to ASTM A36 and are made from galvanized steel. Rails use 6000 series aluminum, and stainless steel hardware resists rust and corrosion.
The rack adjusts to 10°, 20°, 30° or 40°, and pre-drilled holes allow seasonal elevation changes. A U bolt and pitman arm make angle changes straightforward.
The system is rated for wind speeds up to 102 mph and a standard snow load of 80 PSF, depending on the characteristics of the snow.
The modular design uses special splicing kits, convenient clamps and universal HD sliding rails. Little measuring is needed, and no drilling is required.
AIMS Power lists certifications including TUV, ASCE/SEI 7-05 and 7-10, IBC 2006, the 2007 California Administrative Code, AS NZS 1170, Euro Code 8, DIN 1055 and EN 1991-1-3 and 1-4 for snow and wind loads.
Residential solar. Raise an array above the ground on a single pole in the yard.
Farms. Install panels in open fields with plenty of sun exposure.
Commercial sites. Use a certified, heavy duty structure for small commercial arrays.
Open areas. Place solar where sun exposure is best, away from buildings and trees.
Versus ground racks. A single pole raises panels higher off the ground and allows four tilt angles. AIMS Power also offers a six-panel aluminum ground mount rack with mounting feet and a 20 degree maximum pitch.
Versus roof mounting. A pole mount avoids roof penetrations and lets you place panels for the best sun.
Versus small side pole mounts. AIMS Power side pole mounts hold one or two panels up to 170 watts. This rack is built for six large panels.
This may be a good fit if
Everything needed for installation is included except the concrete foundation.
10°, 20°, 30° and 40°.
Up to 102 mph.
AIMS Power provides a 15 year manufacturer defect warranty.
The AIMS Power Single Pole Mount Rack for Heavy Duty Solar Panels gives six large panels a strong, adjustable, certified foundation on a single pole. At Outbound Power, we help customers plan arrays, mounting and foundations for off-grid and grid-tied systems. Contact our team and we will help you plan your installation.
AIMS Power Single Pole Mount Rack Specifications |
|
|---|---|
| Panel Capacity | Up to 6 Large Panels (265 Watts or Larger), Up to 2.0 kW; More Panels Possible Depending on Size |
| Panel Types | PV 60, 72 and 96 Cell (All Brands) |
| Panel Orientation | Portrait |
| Rail and Pole Length | 126" |
| Applications | Residential, Farms, Commercial, Open Areas |
| Materials | Galvanized Steel ASTM A36, Stainless Steel, Aluminum (6000 Series Rails) |
| Tilt Angles | 10°, 20°, 30°, 40° |
| Wind Tolerance | 102 mph |
| Snow Load | 80 PSF (Standard, Depends on Snow Characteristics) |
| Foundation Required | Concrete, 63" Square by 24" Deep (Not Included) |
| Certifications | TUV, GB50009-2001, GB50011-2001, GB/T 13912-92, GB/T 14846-2008, GB/T 6892-2006, GB50429-2007, GB50017-2003, AS NZS 1170, ASCE/SEI 7-05, ASCE/SEI 7-10, 2007 California Administrative Code, IBC 2006, Euro Code 8, DIN 1055, EN 1991-1-3, EN 1991-1-4 |
| Warranty | 15 Year Manufacturer Defect |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder
