SunGold Power 200 Feet Solar Cable

SunGold Power 200 Feet Solar Cable With 10 AWG Copper Wire So That Your Solar Array Reaches Where Standard Cables Can't

Most solar installations don't fail because of the panels or the inverter. They fall short because someone ran out of cable or settled for undersized wire that quietly bleeds energy on every foot of the run. The SunGold Power 200 Feet Solar Cable puts that problem behind you with a single, purpose-built solution: 200 feet of 10 AWG photovoltaic-grade copper cable designed to carry your solar harvest from panel to battery without flinching.

Whether you're wiring a whole-home backup system, extending your RV's roof panels to a ground-mount array, powering a remote off-grid cabin, or keeping a mobile worksite humming far from the nearest utility pole, this solar extension cable gives you the reach, the durability, and the electrical integrity to do it right the first time.

At Outbound Power, we specialize in portable and backup power solutions for homeowners, RVers, off-grid builders, and mobile professionals and we know that a solar system is only as good as its weakest component. The SunGold Power 200 Feet Solar Cable is a component you can trust: the right gauge, the right insulation, the right length to give your solar array the reach it needs and deliver every watt your panels generate to the battery bank where it matters.

SunGold Power 200 Feet Solar Cable Features

This Cable Goes the Distance So Your Panels Can Too.

At 200 feet, this solar cable gives you the freedom to place solar panels in the best sun location even if that's far from your battery bank or inverter. No more settling for second-best panel placement.

Thick 10 AWG Copper Wire Keeps Your Power From Going to Waste.

The heavy-gauge copper core handles up to 30 amps while keeping voltage drop low across the full run. More of the power your panels generate actually reaches your batteries not lost as heat along the wire.

UV-Resistant Jacket Means This Cable Won't Crack or Crumble Outdoors.

Built with photovoltaic-grade insulation that resists sun damage, this cable stays flexible and intact year after year. Generic wire breaks down under constant UV exposure; this one is engineered specifically to live outside permanently.

All-Weather Construction Keeps the Connection Solid Rain or Shine.

Moisture, heat, cold, and abrasion are no match for this cable's durable outer jacket. It resists water ingress and corrosion so your solar connection stays clean and reliable through every season without needing regular inspection or replacement.

Flexible and Easy to Route Through Tight Spaces During Installation.

Stranded copper construction makes this cable bend and flex naturally around corners, through conduit, and into tight spaces. It won't kink or fight back the way stiff solid wire does, saving you time and frustration on install day.

One Long Run Beats Splicing Shorter Cables Together Every Time.

A single continuous 200-foot cable has no mid-run connection points to corrode, loosen, or fail over time. Fewer connections mean lower resistance, better power transfer, and one less thing to troubleshoot years down the road.

Works With Most Standard Solar Systems Right Out of the Box.

This cable is compatible with the majority of residential and off-grid solar setups. The bare-ended design lets you terminate it your way MC4 connectors, ring terminals, or direct bus connections so it fits your existing system cleanly.

SunGold Power 200 Feet Solar Cable Warranty

SunGold provides a limited warranty policy, ensuring the absence of defects in materials, workmanship, and performance during the warranty period.

What's Included

• 1 x SunGold Power 200 Feet Solar Cable