Authorized Retailer
Easy 30-Day Returns
Friendly Lifetime Support
A 12V battery can store useful energy, but many of the devices people rely on are designed for standard AC power. This Wagan Tech inverter bridges that gap by taking 11–15V DC input and producing 115V AC at 60 Hz. Its modified sine wave output makes it important to confirm that your intended equipment is compatible before use, particularly sensitive electronics and audio equipment.
The inverter is built around Wagan Tech's TrueRated™ Power specification, which the manufacturer describes as power tested and rated for 24-hour continuous operation at full load. It also provides high peak surge capability to accommodate appliances and equipment that require additional wattage during startup.
The inverter provides 1,250 watts of TrueRated™ continuous power, giving a 12V battery system the ability to supply substantial AC loads when properly configured. At maximum continuous output, the manual states that the battery bank must be capable of continuously supplying 125 amps at 12V for the required operating time.
Some appliances and motor-driven equipment draw more power when starting than they do during normal operation. The 2,600-watt peak surge rating provides additional startup capacity, although connected equipment must remain within the inverter's surge and continuous power limits to avoid an overload shutdown.
Three NEMA 5-15 USA AC outlets make it possible to connect multiple compatible AC appliances or devices at the same time. The total connected load still needs to remain within the inverter's rated capacity, so add the wattage of the equipment you plan to operate simultaneously before switching everything on.
The front-panel LED system displays inverter operating information and cycles between input and output readings approximately every five seconds. It can also display error codes when a malfunction occurs, helping you identify conditions such as low battery voltage, overvoltage, overload, overheating, or a short circuit.
Alongside its AC outlets, the inverter includes a USB outlet rated at 2.0A. This gives you another connection option for compatible USB-powered equipment while reserving the AC outlets for devices that require conventional 115V AC power.
The SlimLine Plus 1250 incorporates several automatic protection functions. A low-battery alarm alerts you when battery voltage drops, while automatic shutdown helps prevent operation below the specified battery-voltage threshold. Overload, short-circuit, and thermal protection can also shut the inverter down when conditions require it.
A remote control connection port allows the inverter to be operated using a remote on/off switch. The specified remote cord length is 26 feet, which can be useful when the inverter is mounted in a location where reaching the front-panel switch is inconvenient.
Mounting holes support secure installation, while the internal high-speed fan helps move heat away from the inverter when loads are high or temperatures rise. Wagan Tech recommends maintaining at least two inches of clearance around the inverter for airflow. If installed in a moving vehicle, the inverter should also be secured against shifting.
This inverter is intended for 12V battery-based systems rather than standalone battery storage. That makes system planning particularly important. You need to consider the battery bank, expected AC load, desired operating time, charging method, cable distance, and the current available from the vehicle or other charging system.
Because the inverter operates from a 12V battery system, it can be considered for planned vehicle and RV installations where compatible AC equipment needs to be powered away from a conventional outlet. The inverter must be securely mounted, adequately ventilated, properly grounded, and connected using appropriate cabling and battery protection.
The manual provides installation guidance for vehicle and boat grounding, making a properly configured 12V marine application a potential use case. However, the inverter should not be operated in or around water, and installation must follow the manufacturer's grounding, ventilation, cable, and fuse requirements.
For backup planning, the SlimLine Plus 1250 can provide AC power from a suitably sized 12V battery bank. Rather than treating it like a whole-home generator, think of it as a component in a battery-based power system. The appliances you want to operate determine the required battery capacity and charging strategy.
The 1,250-watt continuous rating and 2,600-watt peak surge rating can support appropriately sized AC equipment when the battery system and inverter wiring are designed for the load. Always check the equipment's actual wattage and startup requirements before connecting it.
One of the most important buying considerations is the inverter's output waveform. This model produces a 115V modified sine wave output rather than the pure sine wave output supplied by typical household AC power.
Many ordinary appliances can operate from modified sine wave power, but compatibility should never be assumed for every electronic device. The manual specifically notes that some stereo systems and portable radios may produce buzzing because their power supplies do not adequately filter modified sine wave power. Customers should confirm compatibility with the equipment manufacturer when powering sensitive or specialized electronics.
A 1,250-watt inverter can place a substantial demand on a 12V battery system. At maximum continuous output, Wagan Tech specifies a requirement for a DC power source capable of continuously supplying 125 amps at 12V. Actual runtime depends on the connected load, battery capacity and condition, cable losses, battery temperature, charging, and other factors.
The manual specifies a 200-amp battery protection fuse and provides recommended 12V cable gauges based on round-trip cable length. The battery protection fuse should be installed within one foot of the positive battery connection. The supplied manual also calls for appropriate grounding and secure DC connections.
Installation should therefore be treated as part of the power-system design rather than an afterthought. Loose connections, undersized cables, excessive cable length, incorrect polarity, or inadequate ventilation can create operating problems or damage the inverter.
Compared with a small portable power station, this inverter takes a different approach. It does not provide its own integrated battery in the specifications supplied here. Instead, it converts energy from an external 12V battery bank into AC power. This can make it appropriate when you already have a suitable 12V battery system and want to add AC output capability.
It also should not be viewed as a replacement for a larger whole-home backup system or a fuel-powered generator when significantly higher loads or longer operating periods are required. The right choice depends on the equipment you need to run, how long you need to run it, and the battery and charging resources available to you.
This inverter may be a good fit if you are building or already have a 12V battery-based power system and need 115V AC output for appropriately sized equipment. It is particularly worth considering when multiple AC outlets, USB access, remote operation, display monitoring, and built-in protection are useful to your setup.
This May Be A Good Fit If
Before purchasing, confirm your equipment's running wattage and startup requirements, verify modified sine wave compatibility, and plan the battery capacity around your expected runtime. The manual does not provide a battery capacity with the inverter itself because the required battery bank depends on the specific loads and operating time.
The inverter is designed for 12V battery systems and accepts an input of 11–15V DC. The manual specifically states that the inverter is only compatible with 12V battery systems.
It provides 1,250 watts of TrueRated™ continuous power and has a 2,600-watt peak surge rating. Connected equipment must remain within the appropriate continuous and surge limits.
The SlimLine Plus 1250 produces a modified sine wave output at 115V AC and 60 Hz. Check the compatibility requirements of sensitive electronics before use.
The supplied product manual describes the inverter as a component connected to an external 12V battery system and does not specify an integrated battery. Battery capacity must be selected according to the intended load and runtime.
Yes. The inverter includes low-battery alarm and shutdown, overvoltage, overload, short-circuit, and thermal protection functions. It also displays error codes to help identify certain fault conditions.
The Wagan Tech SlimLine 1250 Watt 12 Volt AC Power Inverter is a practical solution for turning a properly configured 12V battery system into usable 115V AC power. With 1,250 watts of TrueRated™ continuous output, 2,600 watts of peak surge capacity, three AC outlets, USB power, LED monitoring, remote operation capability, and multiple protective functions, it provides useful flexibility for mobile and backup power planning. At Outbound Power, we focus on helping customers match power equipment to the real demands of their systems. Choose the SlimLine 1250 when its 12V input, modified sine wave output, power rating, and installation requirements align with your equipment and power plan.
Wagan Tech SlimLine 1250 Watt 12 Volt AC Power Inverter Specifications |
|
|---|---|
| Rated Power (TrueRated™) | 1,250W |
| Surge Power | 2,600W |
| AC Output Voltage | 115V |
| Frequency | 60Hz |
| AC Outlets | 3 × Standard 3-Prong |
| USB Output | 5V, 2A |
| Maximum Efficiency | 90% |
| Output Waveform | Modified Sine Wave (MSW) |
| Overload Protection | Auto Power Off |
| Overvoltage Shutdown | 15.5V ± 0.5V DC |
| Overheat Protection | Cooling Fan with Auto Power Off |
| Cooling Fan | Temperature Controlled |
| DC Input | 12V* |
| DC Cable | 18 in, 6AWG (Included) |
| Input Voltage Range | 11V to 15V |
| Short Circuit Protection | Yes, Internal Fuses |
| Reverse Polarity Protection | Yes, Internal Fuses |
| Internal Fuses | ATO 40A × 6 |
| Low Battery Alarm | 10.5V ± 0.5V |
| Low Battery Auto Power Off | 10V ± 0.5V |
| No Load Current Consumption | < 1.0A |
| NTG Bonded | Yes |
| True Ground | Yes |
| AC Power Switch | Yes |
| Remote Control | Included |
| LED Display | Input / Output / Error |
| Operating Temperature | -5°C to 40°C (23°F to 104°F) |
| Dimensions (L × W × H) | 12.0 × 7.1 × 2.9 in |
| Weight | 6.0 lb |
| Warranty | 2 Years |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder
