Anker SOLIX S2000 Portable Power Station | 2010Wh | 1500W | 400W Solar Input
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The Anker SOLIX S2000 is built for the moment the refrigerator goes quiet, the internet drops, or your campsite is miles from the nearest outlet.
Its 2,010Wh battery can keep a home refrigerator running for up to 35 hours based on Anker’s estimate, while 1,500W of continuous output supports many of the appliances, electronics, tools, and chargers people rely on every day.
Better still, its long-life LFP battery is rated for 10,000 charge cycles and a manufacturer-stated 15-year lifespan, giving you a portable power solution designed for years of outages, RV trips, projects, and off-grid adventures.

A power outage becomes much more expensive when the food in your refrigerator begins to spoil. With 2,010Wh of stored energy and Anker’s OptiSave™ technology, the S2000 is designed to keep a home refrigerator running for up to 35 hours. Anker reports a low 6W idle power draw and 10% higher efficiency, helping the unit run up to 20% longer than other 2kWh power stations in the manufacturer’s comparison. Actual runtime will depend on the refrigerator, operating conditions, temperature, and battery settings.
Anker positions the S2000 as the world’s longest-lasting 2kWh portable power station. Its 314Ah LFP battery cells are rated for 10,000 charge cycles and a manufacturer-stated lifespan of up to 15 years. That matters because a backup power station should not feel disposable. The S2000 is designed to remain part of your emergency plan, travel setup, or mobile workspace through years of regular charging and discharging.
The S2000 provides 1,500W of continuous AC output through five 120V outlets. According to Anker, that is enough to operate 99% of essential home devices, depending on their individual running and startup requirements. It can support appropriately sized refrigerators, lights, internet equipment, televisions, laptops, battery chargers, small appliances, and selected handheld tools.
Because the 1,500W rating is shared across all AC outlets, customers should add together the wattage of everything they plan to operate at the same time.

SurgePad™ allows the S2000 to support compatible appliances requiring up to 2,600W. This feature works particularly well with certain heat-producing devices but is not intended for precision instruments or equipment with strict voltage requirements. The standard continuous output remains 1,500W, so SurgePad should not be treated as a 2,600W continuous rating for every appliance.
Portable power stations consume some energy simply by remaining on and ready. The S2000’s OptiSave technology is designed to reduce that background consumption, with a manufacturer-stated idle draw of just 6W. That helps preserve more of the battery for the refrigerator, lights, electronics, or equipment you actually need to run.
Anker lists six ways to recharge the S2000, giving you flexibility at home, on the road, or away from the grid:
Some charging methods require separately purchased cables, solar panels, adapters, or an alternator charger. Customers should confirm accessory compatibility before connecting a charging source.

Standard AC charging supports up to 1,150W. When faster recovery is needed, UltraFast Recharging can be enabled through the Anker app for up to 1,600W of AC input. Anker recommends using the faster setting only when necessary to help maintain optimal battery health.
The XT60i solar input accepts 11V to 60V DC, up to 12.5A and 400W maximum. A properly matched solar-panel array can help replenish the battery at an RV site, campsite, remote property, outdoor event, or mobile work location. Solar panels, the PV-to-XT60i charging cable, and extension cables are sold separately unless included in a specific bundle.
The S2000 includes five AC outlets, one USB-A port, and two USB-C ports. One USB-C connection supports up to 100W for compatible laptops and other higher-demand USB-C devices. With connections located on the front and rear, you can place frequently used devices within easy reach while keeping longer-term loads connected more neatly behind the unit.

The Anker app lets you manage charging limits, discharge limits, AC schedules, output-port memory, silent mode, and operating modes. Available settings include Standard UPS Mode, Time-of-Use Mode, Self-Consumption Mode, Custom Mode, Storm Guard, and a Fast Charging Plan. These controls can help you prepare the battery for an approaching storm, schedule when connected equipment receives power, or preserve a chosen amount of backup energy.
At 8.2 × 11.1 × 12.7 inches and 35.7 pounds, the S2000 delivers approximately 2kWh of storage without taking over the garage, RV, or work vehicle. Anker states that it is 30% smaller and 25% lighter than the industry average for a 2kWh power station. That makes it easier to move between the house, workshop, vehicle, campsite, and storage area when plans change.
When connected to a wall outlet with AC output enabled, the S2000 can switch to battery power in 10 milliseconds during an outage. This can help supported internet equipment, computers, and other electronics continue operating through a brief interruption. Customers using highly sensitive equipment should confirm that the device can tolerate a 10ms transfer time.


Smaller power stations may be easier to carry, but they generally provide less stored energy for extended outages or overnight use. Larger home battery systems can offer more capacity and higher output, but they are also less portable and may be designed for permanent installation. The S2000 sits between those two categories by combining approximately 2kWh of storage with a compact, movable design.
A gas generator may provide greater continuous output and can continue operating while fuel remains available. The S2000 instead stores energy that can be replenished from several supported sources, including a wall outlet, solar panels, a compatible generator, a vehicle outlet, or a compatible alternator charger. The better choice depends on the appliances you need to run, the expected outage length, and how you plan to recharge.
Customers who need 240V output, service-panel integration, or substantially more than 2,010Wh of storage should compare larger home backup systems. The supplied materials do not state that the S2000 accepts expansion batteries. For marine use, customers should confirm environmental suitability because the provided information does not identify a marine certification or water-resistance rating.

Anker estimates that the S2000 can power a home refrigerator for up to 35 hours. Actual runtime will vary based on the refrigerator’s power consumption, how often its compressor runs, ambient temperature, battery settings, and other connected loads.
The S2000 provides 1,500W of continuous AC output, and Anker states that it can operate 99% of essential home devices. Customers should still check the running wattage and startup requirements of each appliance before connecting it.
The LFP battery is rated for 10,000 charge cycles and has a manufacturer-stated lifespan of up to 15 years. Actual service life will depend on usage, charging habits, storage conditions, temperature, and other operating factors.
The XT60i input supports up to 400W of solar power, with an accepted voltage range of 11V to 60V DC and a maximum current of 12.5A. The entire solar-panel configuration must remain within all three limits.
The rated continuous AC output is 1,500W total. SurgePad can support up to 2,600W with compatible appliances, but that figure is not the continuous output rating for every device.
The Anker SOLIX S2000 is designed to do more than sit unused in a closet waiting for an emergency. Its long-life LFP battery, useful 2,010Wh capacity, compact footprint, flexible charging options, and smart power controls make it practical for both preparedness and everyday use. Outbound Power can help you compare appliance loads, solar-panel options, charging accessories, and larger backup systems so you can build a power solution that fits the way you actually live, travel, and work.

Anker SOLIX S2000 Specifications |
|
|---|---|
| Product Type | Portable Power Station |
| Rated Battery Capacity | 2,010Wh |
| Rated Battery Voltage And Capacity | 6.4V DC / 314Ah |
| Battery Chemistry | LFP (LiFePO4) |
| Battery Cycle Life | 10,000 Charge Cycles |
| Manufacturer-Stated Battery Lifespan | 15 Years |
| Manufacturer-Estimated Refrigerator Backup | Up To 35 Hours |
| Idle Power Draw | 6W |
| Power Optimization Technology | OptiSave™ |
| Manufacturer-Stated Runtime Comparison | Up To 20% Longer Than Other 2kWh Systems |
| Rated AC Output | 1,500W Total |
| AC Output Voltage And Frequency | 120V AC / 12.5A / 60Hz |
| Maximum SurgePad Output | Up To 2,600W For Compatible Devices |
| AC Output Outlets | 5 |
| Total Output Ports | 8 Total — 5 AC Outlets, 1 USB-A Port, And 2 USB-C Ports |
| Recharge Methods | Wall Outlet, Solar, Combined AC And Solar, Compatible Generator, Compatible Alternator Charger, Or Vehicle Outlet |
| Standard AC Charging Input | 120V AC / 9.58A / 60Hz / 1,150W Max. |
| UltraFast AC Charging Input | 120V AC / 13.33A / 60Hz / 1,600W Max. |
| Bypass Mode Input And Output | 120V AC / 15A Max. For Less Than 3 Hours / 1,800W Max.; 12A Continuous For 3 Hours Or Longer / 60Hz |
| Solar Input Connector | XT60i |
| Solar Input Voltage Range | 11–60V DC |
| Maximum Solar Input Current | 12.5A |
| Maximum Solar Input Power | 400W |
| USB-A1 Output | 5V DC / 2.4A / 12W Max. |
| USB-C1 Output | 5V DC / 3A / 15W Max. |
| Combined USB-A1 And USB-C1 Output | 5V DC / 3.6A / 18W Max. |
| USB-C2 Output | 5V/3A, 9V/3A, 15V/3A, 20V/3A, Or 20V/5A / 100W Max. |
| UPS Transfer Time | 10ms |
| Adjustable Charging Upper Limit | 80%–100% Through The Anker App |
| Adjustable Discharge Lower Limit | 1%–20% Through The Anker App |
| Default Standby Duration | 12 Hours |
| Default Screen Auto-Off Time | 30 Seconds |
| Connectivity | Wi-Fi And Bluetooth Low Energy |
| Supported Power Modes | Standard UPS, Time-of-Use, Self-Consumption, Custom, And Backup Modes |
| Backup Mode Features | Storm Guard And Fast Charging Plan |
| Discharging Temperature | -4°F To 104°F / -20°C To 40°C |
| Charging Temperature | 32°F To 104°F / 0°C To 40°C |
| Manufacturer-Stated Size Comparison | 30% Smaller Than The Industry Average For A 2kWh Power Station |
| Manufacturer-Stated Weight Comparison | 25% Lighter Than The Industry Average For A 2kWh Power Station |
| Dimensions | 8.2 × 11.1 × 12.7 in |
| Weight | 35.7 lb |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder