The BLUETTI Premium 30 V2 Portable Power Station Packs 320Wh of LiFePO4 Storage, 600W of Output and a 10ms UPS Into 9.48 lbs
The BLUETTI Premium 30 V2 is a 320Wh (20Ah) LiFePO4 portable power station with a 600W inverter at 120V. It has two AC outlets, a 140W USB-C port, a 100W USB-C port, two USB-A ports, a 12V/10A car outlet and two DC5521 ports. It weighs about 9.48 lbs (4.3 kg) and measures 9.8 x 7 x 6.6 in.
It's sized for camping, road trips, picnics and desk or bedside backup at home. Turbo charging reaches 80% in about 50 minutes from the wall, the UPS switches over in 10ms or less, and BLUETTI rates the battery for 3,000+ cycles.
BLUETTI Premium 30 V2 Portable Power Station Features
600W Output With 1,500W Power Lifting
The two AC outlets share 600W at 120V, 5A and 50/60Hz, enough for lights, fans, routers and small appliances. Power Lifting mode, off by default, runs pure resistive loads rated 600W to 1,500W, such as electric kettles, blankets and hair dryers. BLUETTI notes that the actual output stays at 600W.
10ms UPS With 980W Bypass
Plugged into the wall, the Premium 30 V2 powers your devices straight from the grid and switches to battery within 10ms during an outage. Bypass passes up to 980W through while it charges. Choose Standard, Time Control, PV Priority or Customized UPS modes in the BLUETTI app. BLUETTI says not to use it for data servers or workstations that need a high-performance UPS.
140W USB-C With PD 3.1
One USB-C port uses the PD 3.1 protocol and delivers up to 140W, which BLUETTI says is enough to fast charge a high-performance laptop such as a MacBook Pro. A second USB-C port gives up to 100W, and the two USB-A ports give 5V/3A each.
Turbo Charging to 80% in About 50 Minutes
There are three AC charging modes. Turbo charges at up to 380W and reaches 80% in about 50 minutes. Standard, the default, charges at up to 200W in about 2 hours. Silent also charges at up to 200W and takes about 3 hours. BLUETTI notes that charging time varies with the ambient temperature.
200W Solar and Flexible Charging
The DC input takes 12V to 28V solar at up to 10A and 200W, and BLUETTI quotes about 2.2 hours to a full charge at 200W. In Turbo mode, AC and solar together reach 380W. You can also charge from a 12V or 24V car socket with the engine running, a generator with pure sine wave output, a BLUETTI Charger 1, a lead-acid battery or a BLUETTI B80P battery pack in power bank mode.
Low Self-Consumption and Quiet Operation
BLUETTI says its UltraCell technology and thermal management cut system power draw by 50%. Self-consumption is 4.5W with no load, 5W on DC standby, 8W on AC standby and 9W with both on. BLUETTI rates the noise at 30dB with a 200W load.
LiFePO4 Battery Rated for 3,000+ Cycles
BLUETTI rates the LiFePO4 cells for 3,000+ charge cycles and up to 10 years of reliable performance. The built-in BMS adjusts charging power based on battery temperature and state of charge to protect the battery.
App Control Over WiFi and Bluetooth
The BLUETTI app connects over WiFi or Bluetooth to set the charging mode, Power Lifting, ECO mode, the grid charging current and UPS schedules, and to update the firmware. BLUETTI recommends updating the firmware before first use.
Real-World Applications
Camping and road trips. BLUETTI estimates about 2.2 hours for a 120W car fridge, 27.4 hours for a 10W camping light and 4 charges for a 60Wh drone battery.
Work on the go. BLUETTI estimates about 5 charges for a 60Wh laptop and 18 charges for a 15Wh smartphone.
Comfort at camp. BLUETTI estimates about 2.8 hours for a 90W electric blanket and about 24 minutes for a 600W hair dryer.
Home office backup. Keep a router, modem and laptop running through short outages with the 10ms UPS switchover.
Practical Comparison
Premium 30 V2 Versus Elite 30 V2
BLUETTI sells the Elite 30 V2, rated 288Wh, on its own website. The Premium 30 V2 is the model BLUETTI sells through dealers such as Outbound Power. It is rated 320Wh, with the same 600W output.
Premium 30 V2 Versus a Gas Generator
The Premium 30 V2 has no engine, so there's no fuel to store, and BLUETTI rates its noise at 30dB with a 200W load. It recharges from the wall, the sun or your car. A generator is the type to look at when you need more than 600W or more than 320Wh between recharges.
Buyer Guidance
Sizing Your Loads
Keep your total load under 600W. BLUETTI notes that devices with motors or compressors may start at 2 to 4 times their rated power, which can overload the unit. BLUETTI estimates runtime as 320Wh x 95% depth of discharge x 90% inverter efficiency, divided by your load plus about 9W of self-consumption.
Solar Panel Limits
Use solar panels with an open-circuit voltage of 12V to 28V and MC4 connectors, up to 10A and 200W in total, and don't mix different types of panels. The solar charging cable is sold separately. The AC output is for off-grid use only, so never connect it to the grid.
No Expansion Battery Port
The Premium 30 V2 doesn't take expansion batteries, so its capacity stays at 320Wh. A BLUETTI B80P battery pack can recharge it in power bank mode.
This May Be A Good Fit If
- You want a power station under 10 lbs
- You charge laptops that need up to 140W over USB-C
- You need a 10ms UPS for a router or computer
- Your loads stay under 600W
Common Questions
Can It Charge and Power Devices at the Same Time?
Yes. The Premium 30 V2 supports pass-through charging, with up to 980W of bypass from the wall.
Can I Use Other Brands of Solar Panels?
Yes, as long as the open-circuit voltage is 12V to 28V and the panels have MC4 connectors. You'll need the solar charging cable, which is sold separately.
Why Is the Charging Power Sometimes Low?
The built-in BMS adjusts charging power based on battery temperature and state of charge to protect the battery and extend its life.
What Warranty Does It Have?
The Premium 30 V2 comes with a 5-year BLUETTI warranty.
What's Included
- 1 x BLUETTI Premium 30 V2 Portable Power Station
- 1 x AC Charging Cable
- 1 x Car Charging Cable
- 1 x Grounding Screw
- 1 x User Manual
Compact Power You Can Take Anywhere
The BLUETTI Premium 30 V2 Portable Power Station combines 320Wh of LiFePO4 storage, 600W of output, 140W USB-C and a 10ms UPS in a case under 10 lbs. If you'd like help sizing your loads or choosing a solar panel, the Outbound Power team is happy to help.
BLUETTI Premium 30 V2 Portable Power Station | 320Wh | 600W | 200W Solar Input Specifications
|
| Battery |
| Battery Capacity |
320Wh / 20Ah |
| Cell Type |
Lithium Iron Phosphate (LiFePO4) |
| Cycle Life |
3,000+ charge cycles |
| AC Output |
| AC Output |
600W total, 120VAC, 5A, 50Hz / 60Hz |
| Power Lifting |
1,500W (pure resistive loads) |
| AC Outlets |
2 |
| DC Output |
| 140W USB-C Port |
1 x 140W max (PD 3.1), 5 / 9 / 12 / 15V at 3A, 20 / 28V at 5A |
| 100W USB-C Port |
1 x 100W max, 5 / 9 / 12 / 15V at 3A, 20V at 5A |
| USB-A Ports |
2 x 5V / 3A (15W max per port) |
| Cigarette Lighter Port |
1 x 12V / 10A |
| DC5521 Ports |
2 x 12V / 5A, 8A in total |
| Car + DC5521 Limit |
10A in total (wired in parallel) |
| AC + DC Output |
600W max |
| Charging |
| AC Charging, Turbo |
380W max, 80% in about 50 min at 77°F (25°C) |
| AC Charging, Standard |
200W max, about 2 hrs |
| AC Charging, Silent |
200W max, about 3 hrs |
| AC Input With Bypass |
980W max |
| Solar Input |
200W max, 12V to 28V, 10A max |
| Solar Charging Time |
About 2.2 hrs at 200W |
| AC + Solar Input |
380W max |
| Car Charging |
12V / 24V socket, engine running |
| Features |
| UPS Switching Time |
10ms or less |
| Pass-Through Charging |
Yes |
| Connectivity |
WiFi / Bluetooth |
| Noise |
30dB (200W load) |
| Self-Consumption |
4.5W (no load), about 9W (AC + DC on) |
| IP Rating |
IP20 |
| Temperature |
| Charging Temperature |
32°F to 104°F (0°C to 40°C) |
| Discharging Temperature |
-4°F to 104°F (-20°C to 40°C) |
| Storage Temperature |
-4°F to 104°F (-20°C to 40°C) |
| Operating Humidity |
10% to 90% |
| Size and Weight |
| Dimensions (L x W x H) |
9.8 x 7 x 6.6 in (250 x 178 x 167.5 mm) |
| Net Weight |
About 9.48 lbs (4.3 kg) |
| Warranty |
| Warranty |
5 years |
BLUETTI Premium 30 V2 Portable Power Station Manuals
User Manual
Data Sheet