EARLY BLACK FRIDAY SALE IS LIVE  |  SHOP NOW WITH OUR PRICE DROP GUARANTEE →
EARLY BLACK FRIDAY SALE IS LIVE  |  SHOP NOW →
Skip to content
Contractor cutting lumber with a circular saw beside a portable generator at an outdoor job site

Power Without an Outlet

Jobsites & Remote Projects

Run tools, lights and equipment where there's no outlet. Compare portable generators and rugged power stations, with volume pricing for crews and fleets.

Early Black Friday Sale

Early Black Friday Deals for Jobsites

November 1–26

Shop early with our Price Drop Guarantee. If our price drops by Black Friday, we'll refund the difference.

What Do You Need to Run?

Pick the setup that matches your tools and your crew.

Outfitting a crew, fleet or facility? See Commercial Power Solutions

How Long Will It Run?

Estimated runtime on one full charge, running one item at a time.

JackeryExplorer 2000 v22,042 WhArkpaxArk Pro2,300 WhAnkerSOLIX F30003,072 Wh
LED work light50W34 hours39 hours2 days
Laptop60W28 hours32 hours43 hours
Corded drill, 1/2-inch600W2.5 hours3 hours4 hours
Circular saw, 7-1/4-inch1,400W1 hour1 hour1.5 hours
Miter saw, 10-inch1,800W55 minutes1 hour1 hour
Space heater1,500W1 hour1 hour1.5 hours

Estimates use 85% of each battery's rated capacity to allow for power lost in conversion. Real runtime depends on the appliance, its settings and the temperature. Times are for nonstop running. Tools that run on and off last much longer over a workday.

Running several things at once? Add them up in the Power System Calculator

Generator or Power Station?

Both run tools. Here's how they differ.

Portable Generator Power Station
Noise Loud Near silent
Fumes Exhaust; outdoors only None; safe indoors
Fuel Gasoline, propane or natural gas Recharges from the grid, solar or a generator
Runtime As long as you have fuel Until the battery runs down
Heavy loads Handles welders and big compressors Best for chargers and lighter tools
Upkeep Oil changes and regular running Very little

Many crews use both, running a power station inside and a generator outside to recharge it.

How to Choose

  1. List Your Tools

    Note every tool and light you'll run at the same time.

  2. Check Starting Watts

    Motors can need two to three times their running watts to start. Size for the biggest one.

  3. Pick Fuel and Outlets

    Tri-fuel runs on whatever's on site. Match 120/240V and twist-lock outlets to your gear.

    Shop Tri-Fuel Generators
  4. Order for Your Crew

    Volume pricing is available for multiple units and fleets.

    Request a Quote

Prefer to run the numbers yourself? Try the Power System Calculator

Get Free Expert Help

Free help from real people, before you buy.

  • 60-Second Power Quiz

    Answer a few quick questions and get an expert-recommended setup.

    Start the Quiz
  • Power System Calculator

    Add up what you want to run and size a system yourself.

    Open the Calculator

Prefer to talk? Call 1-888-976-5443Mon–Fri, 8 a.m.–4 p.m. MST (Arizona)

Common Questions About Jobsite Power

What size generator do I need for power tools?

Add the running watts of everything you'll use at once, then add the extra starting watts of the largest motor. Many circular saws and compressors run at 1,500–⁠2,500W and need two to three times that to start, so 5,000–⁠7,500W covers a small crew.

Can a power station run power tools?

Yes, if its output covers the tool's starting surge. A power station with 3,000W or more of continuous output runs most circular saws, drills and small compressors. Battery size decides how long.

Why choose an inverter generator for electronics?

Inverter generators make clean, stable power, which is safer for laptops, chargers and tools with electronic controls.

What is a tri-fuel generator?

A generator that runs on gasoline, propane or natural gas, so you can use whatever fuel is on site. See our tri‑fuel generator picks.

Can I run a generator in an enclosed jobsite?

No. Generators make carbon monoxide, so run them outdoors, away from doors, windows and vents. Use a power station inside buildings and enclosed spaces.

Do you offer volume or fleet pricing?

Yes. For multiple units, crews, fleets or facilities, request a quote through Commercial Power Solutions.

Outfitting a Crew or Fleet?

Get volume pricing and a quote for multiple units, or call to talk through your jobsite.

Request a Quote

Or call 1-888-976-5443Mon–Fri, 8 a.m.–4 p.m. MST (Arizona)