The Anker SOLIX PS100 Folds a 100W Bifacial Solar Panel Into a 6.2 lb Package That Collects Sunlight on Both Sides
The Anker SOLIX PS100 is a 100W foldable bifacial solar panel with N-type cells that Anker rates at 25%+ conversion efficiency. It weighs 6.2 lb, folds to 20.1 x 23.6 x 2.5 in and opens to 40.6 x 23.6 x 0.7 in on a stand set at a 35° tilt. Anker rates it IP68 and covers it with a 5-year warranty.
It's for campers, van travelers and anyone who wants to recharge a portable power station away from an outlet with a panel that's easy to carry. At 100W with a 21.6V output, it suits setups where low weight and quick setup matter more than high wattage.
Anker SOLIX PS100 Features
Folds to 20.1 x 23.6 in and Weighs 6.2 lb
Anker lists the PS100 at 6.2 lb, and it folds to 2.5 in thick for carrying and storage. Unfolded, it spans 40.6 x 23.6 in.
Collects Light on the Front and Rear
The PS100 is bifacial, so it harvests sunlight on both surfaces. Anker says the rear side adds up to 10% more power in reflective or open areas such as snow, sand or concrete.
N-Type Cells Rated at 25%+ Efficiency
Anker uses N-type solar cells rated at 25%+ conversion efficiency. It designs them to minimize energy loss and keep performing in high temperatures.
A Fixed 35° Angle With Slight Adjustment
Anker sets the panel at a 35° tilt, which its calculations show optimizes power generation from 10 AM to 5 PM in Japan, the U.S. and Europe. The bracket allows slight adjustments when you need them.
IP68 Rating and a Reinforced Aluminum Frame
The PS100 has a reinforced aluminum frame and impact-resistant materials. Anker rates it IP68 for water and dust resistance and says that protects it against water splashes, but advises keeping it out of heavy rain and never submerging it. Anker rates the panel for a 10-year lifespan.

Real-World Applications
Camping and overlanding. Unfold the PS100 at camp, face it toward the sun and recharge a portable power station during the day.
Van and car travel. Folded to 2.5 in thick, it stores flat in a vehicle between stops.
Home emergency kit. During an outage, set the panel outside in direct sun to keep a small power station topped up.
Practical Comparison
PS100 Versus a Rigid Glass Solar Panel
A rigid glass panel stays at full size and usually needs a mount. The PS100 folds to 20.1 x 23.6 in, weighs 6.2 lb and stands at 35° on its own bracket.
Bifacial PS100 Versus a Single-Sided Folding Panel
A single-sided panel collects light only on its face. The PS100 also uses light that reaches its rear surface, which Anker says adds up to 10% more power over reflective or open ground.
Buyer Guidance
Connecting the Panel
The PS100 comes with two 8.2 ft (2.5 m) solar charging cables and a 1.6 ft (0.5 m) XT60i solar charging cable. Its PV output is 21.6V at 4.63A, so check that your power station's solar input accepts that voltage and connector. Our team can confirm a pairing before you buy.
Getting More From the Sun
Real-world output depends on sun intensity, panel orientation, angle, heat and shade, so you won't always see the full 100W. Avoid shade on any part of the panel, and set it over snow, sand or concrete when you can to help the rear side.
This May Be A Good Fit If
- You want a light solar panel that folds for travel
- You recharge a portable power station at camp or on the road
- You often set up over sand, snow or concrete
- Your power station's solar input works with a 21.6V panel
Common Questions
Can the PS100 Get Wet?
Anker rates it IP68 and says it's protected against water splashes. Keep it out of heavy rain and never submerge it.
Why Isn't My Panel Producing 100W?
Solar output varies with sunlight intensity, orientation and angle, so actual power is often lower than the rating. Anker suggests testing the panel in full, unobstructed sunlight.
How Do I Clean the Panel?
Wipe off dust and dirt with a soft cloth, then use a damp cloth to clear any residue. Remove heavy dirt or debris promptly to keep the panel performing.
Does the Frame Get Hot?
Yes. Anker notes that the black metal frame can heat up after long exposure to sunlight. Avoid touching it directly and wear gloves when you adjust or move the panel.
What Warranty Does the PS100 Have?
Anker covers the PS100 with a 5-year warranty.
What's Included
- 1 x Anker SOLIX PS100 Bifacial Portable Solar Panel
- 2 x 8.2 ft (2.5 m) Solar Charging Cable
- 1 x 1.6 ft (0.5 m) XT60i Solar Charging Cable
- 1 x Quick Start Guide
- 1 x Safety Card
100W of Solar That Folds Down
The Anker SOLIX PS100 gives you 100W of bifacial solar in a 6.2 lb folding panel with a 35° stand, an IP68 rating and a 5-year warranty. If you'd like help matching it to your power station, the Outbound Power team is happy to help.
Anker SOLIX PS100 Bifacial Portable Solar Panel Specifications
|
| Solar Output |
| Total Power Output |
100W |
| PV Output |
21.6V, 4.63A |
| Conversion Efficiency |
25%+ |
| Cell Type |
N-type, bifacial |
| Rear-Side Gain |
Up to 10% in reflective or open areas |
| Construction |
| Frame |
Reinforced aluminum |
| Water and Dust Rating |
IP68 |
| Tilt Angle |
35° fixed, slight bracket adjustment |
| Rated Lifespan |
10 years |
| Cables |
| Solar Charging Cables |
2 x 8.2 ft (2.5 m) |
| XT60i Solar Charging Cable |
1.6 ft (0.5 m) |
| Size and Weight |
| Unfolded Dimensions |
40.6 x 23.6 x 0.7 in |
| Folded Dimensions |
20.1 x 23.6 x 2.5 in |
| Weight |
6.2 lb |
| Warranty |
| Warranty |
5 years |
Anker SOLIX PS100 Bifacial Portable Solar Panel Manual