AIMS Power 24VDC Off-Grid Solar Kit | 240 Watt Solar + 300 Watt Pure Sine Inverter

AIMS Power introduces the new all-in-one solar kit for all of your off-grid power needs. Whether you’re supplying power to a small device in an RV or lighting for a small cabin, this solar kit includes all necessary products required and bundled for your convenience.

This 240-watt solar kit is most effective when used to power small devices.  The 300-watt 24 VDC inverter runs more efficiently and you can use more solar panels with the 10 amp charger at 24VDC.  The panels are covered in tempered glass to protect from hazardous weather. The PV wiring is protected against UV, water, ozone, fluids, oil, salt and general weathering. Each system comes with a wiring diagram upon purchase.

The AIMS Power Off-Grid Solar Kit also features 100 amps of battery power and a 10 amp charger controller.

This solar kit is Ideal for small devices such as computers, TVs, video games, lights, CPAPs up to 2.5 amps. Perfect for off-grid locations needing about 7-8 hours of run time using 300 watts, relying only on solar to recharge.

24Vdc runs more efficient with less equipment. Solar panels keep a trickle charge on the battery with sunlight and will recharge batteries at 50% depletion in <5 hours in full sun.

All shipping costs are included in the sales price.

AIMS Power 300 Watt 24VDC Off-Grid Solar Kit Features

• Easy to connect and use
• Works with small size devices up to 300 watts/ 2.5 AC amps
• Ideal for small size pumps, computers, video games and cell phones
• Expandable – supports multiple batteries
• Total panel dimensions are 8ft x 2ft which fits perfect on top of a RV, bus or work truck

*The solar panels will recharge a 50% depleted 100 amp battery in 5 hours with full sunlight.*

What's In The Box

• 1 x 300-watt pure sine inverter – 24 Volt
• 2 x 120-watt monocrystalline solar panels
• 2 x 100 ah AGM deep cycle battery
• 1 x 10 amp PWM solar charge controller
• 1 x 100-foot PV wire for Solar Panel to Charge Controller (female to cut end)
  
• 1 x 100-foot PV wire for Solar Panel to Charge Controller (male to cut end )
• 1 x 30-foot PV wire that can be cut to desired length for Charge Controller to Batteries (cut to lugged ends for battery)
• 1 x 6 ft. 8AWG set of cables battery bank to inverter
• 1 x 1 ft. jumper to connect batteries in series