The Anker SOLIX PS400 Delivers 400W of Bifacial Solar From a Panel That Folds to 22.3 x 38.7 in
The Anker SOLIX PS400 is a 400W foldable bifacial solar panel with N-type cells that Anker rates at 25%+ conversion efficiency. It weighs 21.9 lb, opens to 90.2 x 38.7 x 0.7 in on a stand set at a 35° tilt, and folds to 22.3 x 38.7 x 3.2 in. Anker rates it IP68 and covers it with a 5-year warranty.
It's for RV owners, campers and homeowners who want to recharge a larger portable power station from the sun without a roof install. Choose one panel, or two to six panels for power stations and setups that take more solar.
Anker SOLIX PS400 Features
400W That Folds for Transport
Unfolded, the PS400 spans 90.2 x 38.7 in. Folded, it measures 22.3 x 38.7 x 3.2 in, and Anker lists it at 21.9 lb.
Bifacial Cells That Use Reflected Light
The PS400 collects sunlight on its front and rear surfaces. Anker says the rear side adds up to 10% more power in reflective or open areas such as snow, sand or concrete.
N-Type Cells Rated at 25%+ Efficiency
Anker uses N-type solar cells rated at 25%+ conversion efficiency, designed to minimize energy loss and keep performing in high temperatures.
A 48V Output at 8.33A
Anker lists the PV output at 48V and 8.33A. Check that figure against your power station's solar input range before you connect one panel or several.
A Fixed 35° Angle With Slight Adjustment
Anker's calculations show a 35° tilt optimizes power generation from 10 AM to 5 PM in Japan, the U.S. and Europe, so the stand holds that angle. The bracket allows slight adjustments when you need them.
IP68, a Reinforced Aluminum Frame and a 10-Year Lifespan
Anker builds the PS400 with a reinforced aluminum frame and impact-resistant materials, rates it IP68 for water and dust resistance, and rates it for a 10-year lifespan. Anker says the IP68 rating protects against water splashes and advises keeping the panel out of heavy rain and never submerging it.

Real-World Applications
RV and van camping. Set the PS400 beside your rig and recharge a large portable power station during the day while you're parked.
Home backup during outages. Lay out one or more panels in a sunny part of the yard to recharge a power station while the grid is down.
Off-grid cabins and basecamps. Set up several PS400 panels for longer stays, then fold them away when you leave.

Practical Comparison
PS400 Versus a Rigid Glass Solar Panel
A rigid glass panel stays at full size and usually needs a mount. The PS400 folds to 3.2 in thick, stands on its own bracket at 35° and packs away indoors when you're done.
One PS400 Versus a Multi-Pack
One panel suits a single power station and a simple setup. Two to six panels add more collecting area for power stations or setups that accept more solar, as long as the combined voltage and wattage stay within your power station's input limits.

Buyer Guidance
Planning a Multi-Panel Setup
Before you connect two or more PS400 panels, check your power station's solar input voltage range, current limit and maximum watts. Each panel's PV output is 48V at 8.33A. Our team can help you work out how many panels suit your power station and how to connect them.
Getting More From the Sun
Real-world output depends on sun intensity, panel orientation, angle, heat and shade, so you won't always see the full 400W from each panel. Keep panels out of shade and test them in full, unobstructed sunlight.
This May Be A Good Fit If
- You want 400W of solar that folds for storage
- Your power station accepts a 48V solar input
- You plan to add panels for more solar later
- You camp or set up over sand, snow or concrete
Common Questions
Can the PS400 Get Wet?
Anker rates it IP68 and says it's protected against water splashes. Keep it out of heavy rain and never submerge it.
Why Isn't My Panel Producing 400W?
Output varies with sunlight intensity, orientation and angle, so actual power is often lower than the rating. Anker suggests testing the panel in full, unobstructed sunlight.
How Do I Clean and Handle the Panel?
Wipe off dust with a soft cloth, then use a damp cloth for residue, and remove heavy dirt promptly. Anker notes the black metal frame can heat up in the sun, so wear gloves when you move it.
What Warranty Does the PS400 Have?
Anker covers the PS400 with a 5-year warranty.
What's Included
- 1 x Anker SOLIX PS400 Bifacial Portable Solar Panel
- 2 x 8.2 ft (2.5 m) Solar Charging Cable
- 1 x 1.6 ft (0.5 m) XT-60i Solar Charging Cable
- 1 x Quick Start Guide
- 1 x Safety Card
The 2, 3, 4, 5 and 6 panel options include this list once per panel.
Folding Solar That Scales With Your Setup
The Anker SOLIX PS400 gives you 400W of bifacial solar per panel, a 48V output, a 35° stand, an IP68 rating and a 5-year warranty, in single panels or packs of up to six. If you'd like help planning how many panels your power station can use, the Outbound Power team is happy to help.
Anker SOLIX PS400 Bifacial Portable Solar Panel Specifications
|
| Solar Output |
| Total Power Output |
400W (per panel) |
| PV Output |
48V, 8.33A |
| Conversion Efficiency |
25%+ |
| Cell Type |
N-type, bifacial |
| Rear-Side Gain |
Up to 10% in reflective or open areas |
| Construction |
| Frame |
Reinforced aluminum |
| Water and Dust Rating |
IP68 |
| Tilt Angle |
35° fixed, slight bracket adjustment |
| Rated Lifespan |
10 years |
| Cables (Per Panel) |
| Solar Charging Cables |
2 x 8.2 ft (2.5 m) |
| XT-60i Solar Charging Cable |
1.6 ft (0.5 m) |
| Size and Weight |
| Unfolded Dimensions |
90.2 x 38.7 x 0.7 in |
| Folded Dimensions |
22.3 x 38.7 x 3.2 in |
| Weight |
21.9 lb (per panel) |
| Options |
| Panels Per Option |
1, 2, 3, 4, 5 or 6 |
| Warranty |
| Warranty |
5 years |