The BLUETTI Charger 2 Charges Your Power Station at Up to 1,200W From Your Alternator and Solar at Once
The BLUETTI Charger 2 is a 1,200W alternator and solar dual DC charger that turns your vehicle into a fast charging source for your power station. It draws up to 800W from your alternator and up to 600W from solar panels at the same time, with no switching or unplugging. BLUETTI rates it about 13 times faster than a standard 12V car outlet and twice as fast as the Charger 1.
Charger 2 is also a smart energy hub. It links your starter battery, power station, solar panels, an optional DC hub and auxiliary batteries, can jumpstart or maintain your car battery from solar or a BLUETTI battery, and keeps 12V and 24V devices running when the engine is off. It works with all BLUETTI power stations and most third-party models.
BLUETTI Charger 2 Features
1,200W Alternator Plus Solar Charging
Total charging is limited to 1,200W, and solar always takes priority. If solar supplies 600W, the starter battery supplies 600W. If solar drops to 200W, the starter battery supplies 800W and a BLUETTI auxiliary battery can make up the rest.
Smart Charging That Protects Your Vehicle
Charging starts when you drive and stops when you park. Charger 2 adjusts its draw to protect your starter battery, stops charging if voltage drops too low and supports D+ signals for smart alternators (D+ cable sold separately).
Reverse Charging and Jumpstart
If your starter battery runs low, Charger 2 can recharge it from solar or a BLUETTI power station or battery. Choose Emergency Jumpstart, Trickle Charge or Pulse Maintenance, which uses controlled pulses to reduce sulfation on batteries that have sat unused.
Battery Link for Continuous Power
Connect a BLUETTI expansion battery to the BAT port to keep DC loads running when the engine is off, so lights, fans and a car fridge never drain your starter battery.
12V and 24V DC Output via DC Hub
With the optional DC Hub, Charger 2 provides up to 600W of 12V or 24V power for a car fridge, lights, fans and other DC devices without extra converters.
App Control and Auto-Connect
The BLUETTI app connects over Bluetooth or Wi-Fi to show system status and energy flow. Auto-Connect matches the output voltage to most BLUETTI power stations automatically (the AC200MAX needs a manual setting).
Real-World Applications
RV and van life. Arrive at camp with a full power station after a few hours of driving.
Overlanding and road trips. Combine roof solar and alternator power to stay charged off-grid.
Work trucks. Recharge a power station between jobsites to run tools all day.
Vehicle battery care. Keep a stored vehicle's starter battery maintained with solar.
How It Compares to Common Alternatives
Versus a cigarette lighter outlet. A typical car outlet supplies about 80 to 100W at 12V. Charger 2 delivers up to 1,200W.
Versus the BLUETTI Charger 1. Charger 1 provides 560W from the alternator only. Charger 2 doubles the power, adds simultaneous solar input, reverse charging and battery linking.
Versus a traditional DC-DC charger. Charger 2 adds solar input, app control and power station auto-detection in one unit.
Is the Charger 2 the Right Fit
-
Vehicle. It works with 12V or 24V starter batteries, including two 12V batteries in series, and with hybrids that have an alternator. It does not support EVs.
-
Power station input. To reach 1,200W, your power station must accept 1,200W of DC input and Charger 2 must be set to 56V.
-
Installation. It connects directly to your vehicle battery. Professional installation is recommended, and you should check your vehicle warranty first.
-
Hub D1. The Hub D1 cannot connect directly to Charger 2. Use it through an Apex 300 or a separate battery pack.
This may be a good fit if
- You want the fastest in-vehicle charging for a BLUETTI power station
- You have roof or portable solar and want to combine it with your alternator
- You want to protect and maintain your vehicle's starter battery
Common Questions
Will Charger 2 Drain My Car Battery?
No. It draws less than 1W with the vehicle off and stops charging when the starter battery falls too low. Disconnect it or use a circuit breaker if you will not use it for a while.
How Much Current Does It Draw From My Vehicle?
Up to 66.6A from a 12V system or 33.3A from a 24V system.
Does It Affect Fuel Economy?
Charger 2 uses excess alternator power, so the impact on fuel consumption is minimal.
What Temperatures Can It Handle?
It operates from -4°F to 140°F. Output decreases above 104°F, and a built-in fan cools it when needed.
What's Included
- 1 x BLUETTI Charger 2
- 1 x Car Battery Cable Set
- 1 x 75A Fuse
- 1 x MC4 to XT60 Cable
- 1 x MC4 Input Cable
- 1 x MC4 Output Cable
- 1 x Bidirectional Power Cable
- 6 x Self-Tapping Screws
- 1 x User Manual
Faster Charging Everywhere You Drive
The BLUETTI Charger 2 combines alternator and solar charging, battery care and DC power management in one compact unit. At Outbound Power, we can help you match it with the right power station and solar panels. If you have questions, our team is happy to help.
BLUETTI Charger 2 Specifications
|
| Model |
BLUETTI Charger 2 |
| Output |
| CHG Port (Power Station Charging) |
12V to 56V, 24A; 1,200W Max. |
| DC PANEL Port (48V DC Output) |
40V to 58.5V, 2.5A; bypass 600W Max. |
| 12V DC Output |
Requires DC Hub; 600W shared across USB-A, USB-C, cigarette lighter, DC5521 and 50A Anderson ports |
| BAT Port (Aux Battery In/Out) |
19.2V 52A; 25.6V 39A; 51.2V 19.5A; 1,000W Max. |
| Input |
| Solar (PV) Input |
13V to 50V, 20A; 600W Max. |
| ALT Port (Alternator In/Out) |
12.8V 62.5A; 25.6V 31.3A; 800W Max. |
| General |
| Compatibility |
All BLUETTI and about 95% of third-party portable power stations |
| Safety Protections |
Short circuit, reverse polarity, overcurrent, over/under voltage |
| Fuse |
75A |
| Protection Grade |
IP20 |
| Noise |
50 dB Max. |
| Weight |
3.51 lbs (1.59 kg) |
| Dimensions |
10.43 x 6.65 x 2.74 in (265 x 169 x 69.7 mm) |
| Operating Temperature |
-4°F to 140°F (-20°C to 60°C); power decreases above 104°F |
| Storage Temperature |
-4°F to 140°F (-20°C to 60°C) |
| Working Humidity |
10% to 90% |
| Operating Altitude |
Up to 6,561 ft (2,000 m) |
| App Control |
Bluetooth and Wi-Fi |
| Warranty |
2 Years |
BLUETTI Charger 2 Manual & Guide
BLUETTI Charger 2 Manual
BLUETTI Charger 2 Guide
