Renogy 100W 12V Black Division Lightweight Flexible Solar Panel
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The Renogy 100W 12V Black Division Lightweight Flexible Solar Panel combines a sleek, all-black, glare-free look with a bendable design that flexes up to 240 degrees. It weighs just 5.3 lbs, about a third of a comparable rigid panel, and can produce an average of about 500 watt-hours per day depending on sunlight. That makes it a strong match for RV and van roofs, boats, truck caps and cabins where looks and weight matter.
Half-cut PERC monocrystalline cells improve light capture and electrical performance, and an IP67 junction box and connectors keep out water and dust. The panel is rated for 2,400Pa wind loads and 5,400Pa snow loads, carries a Class A fire rating and arrives with pre-drilled mounting holes and 2.3-foot output cables.


The black surface blends into dark roofs and hulls for a clean, stealthy install and reduces glare for drivers and boaters.
The panel follows the curve of rounded roofs and decks without needing a rigid frame or rack.
Half-cut PERC monocrystalline cells reduce resistance losses and capture more light, improving output from a limited surface area.
A lightweight substrate and laminate stand up to outdoor use, with ratings of 5,400Pa for snow and 2,400Pa for wind. A bypass diode prevents reverse current from the battery at night.
Use the pre-drilled holes for stationary mounts, or bond the panel with silicone adhesive or heavy-duty hook-and-loop fasteners on vehicles. The 2.3-foot 12 AWG output cables plug into standard extension cables.
RVs, vans and trailers. Add solar to curved roofs while keeping a clean, all-black look.
Boats. Charge marine batteries from a deck, cabin top or bimini.
Truck caps and overland rigs. Keep a 12V fridge and auxiliary battery topped up on long trips.
Cabins and camping. Power lights, fans and device charging away from the grid.
Versus a rigid 100W panel. Rigid panels weigh about three times more and need flat mounting, though they generally last longer and run cooler. The Black Division wins on weight, flexibility and appearance.
Versus Renogy's standard Flexible 100W. Both deliver 100W from a similar footprint. The Black Division adds an all-black finish, half-cut PERC cells and a Class A fire rating.
Versus portable suitcases. Suitcases must be set up and put away. A mounted flexible panel charges every time the sun is out.
This may be a good fit if
About 500Wh on average, depending on location, season, sun angle and shading.
No. Concentrated pressure can crack the cells.
Wire in series to add voltage or in parallel to add current, staying within your charge controller's input limits.
Wipe it with water and a non-abrasive sponge to remove dust, sand and salt.
The Renogy 100W Black Division Flexible Solar Panel gives RVs, boats and trucks a low-profile, all-black way to add reliable solar charging. At Outbound Power, we help customers choose panels and controllers for mobile and off-grid systems. If you have questions, our team is happy to help.
Renogy Flexible 100W 12V Black Division Specifications |
|
|---|---|
| Model | RSP100DL-36 |
| Cell Type | PERC monocrystalline, half-cut (6.5 x 3.3 in) |
| Number of Cells | 36 (12 x 3) |
| Maximum Power at STC | 100W |
| Module Efficiency | 15.7% |
| Optimum Operating Voltage (Vmp) | 19.4V |
| Optimum Operating Current (Imp) | 5.20A |
| Open Circuit Voltage (Voc) | 23.5V |
| Short Circuit Current (Isc) | 5.51A |
| Maximum System Voltage | 600VDC |
| Maximum Series Fuse Rating | 15A |
| Rated Current | 35A |
| Flex Range | Up to 240 degrees |
| Wind and Snow Load | 2,400Pa wind, 5,400Pa snow |
| Junction Box | IP67 |
| Output Cables | 12 AWG, 2.3 ft each |
| Maximum Cable Size | 10 AWG |
| Fire Rating | Class A |
| Operating Temperature | -40°F to 176°F (-40°C to 80°C) |
| Dimensions | 43 x 22.9 x 0.8 in (1093 x 582 x 20.5 mm) including junction box |
| Weight | 5.3 lbs (2.4 kg) |
| Certifications | CE, ISO |
| Materials and Workmanship Warranty | 5 years |
| Power Output Warranty | 95% at 5 years, 90% at 10 years, 80% at 25 years |

Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder