The Rich Solar RS-RM03 Bluetooth Inverter Remote Adds a Flush Wall Panel and App Control to NOVA SWITCH and NOVA SUPERCHARGER Inverters
The Rich Solar RS-RM03 is a wired remote panel with built-in Bluetooth for Rich Solar's NOVA SWITCH and NOVA SUPERCHARGER series inverters. At the wall, you can turn the inverter on or to standby, switch operating modes and adjust settings. Through Bluetooth, the RICH SOLAR app lets you monitor the system, switch modes and adjust settings from your phone.
A high-definition backlit LCD shows real-time voltage, current, load and battery status. A 6-conductor cable with RJ12 plug-and-play connections links the panel to the inverter.
Rich Solar RS-RM03 Bluetooth Inverter Remote Features
Monitoring and Settings in the RICH SOLAR App
Install the app on an Android or iOS device and turn on Bluetooth in the app. Then press and hold ESC on the remote to enter pairing mode. The app shows the connected inverter's serial number and model; tap it to open the device page. Leaving that page ends the Bluetooth connection.
Wall Controls for Power, Modes and Settings
The power button turns the inverter on or to standby when the inverter's own power button is off. Hold the setting button for three seconds to enter settings mode, then scroll, change and confirm. A change can take about a minute to reach the inverter.
Live Readings and Fault Alerts
The screens show battery voltage, AC load, and output voltage and frequency, plus input voltage and current in grid mode. Green LEDs show grid mode and battery mode. Solid red marks a fault with an error code; flashing red marks a warning with an alarm.
Bypass Mode and Charging Profiles
Rich Solar lists bypass mode, which keeps critical loads powered during inverter faults, along with AGM, lithium and user-defined battery charging profiles. For what each setting does, the user guide refers you to your NOVA inverter's owner's guide.
Flush Wall Mount
The panel needs a 4.33 x 2.32 inch (110 x 59 mm) cut-out and more than 1.97 inches (50 mm) of recess depth. Its four mounting holes sit 4.69 inches (119 mm) apart side to side and 2.76 inches (70 mm) apart top to bottom.
Real-World Applications
RVs. Mount the panel in the living area, then check battery status or change a setting from your phone.
Off-grid and hybrid systems. Keep the inverter in a utility room and check it from the wall panel or the app.
Practical Comparison
RS-RM03 Versus the RS-RM02
Rich Solar's specification sheet covers both remotes. They share the display, indicators, controls, housing, flush wall mount and RJ12 connection. The RS-RM03 adds Bluetooth for the RICH SOLAR app; the RS-RM02 is the version without it.
Buyer Guidance
Plan the Wall Opening and Cable
Rich Solar recommends a mounting height of about 59 inches (1.5 m), away from water and heat, with the wall cavity clear of pipes, insulation and wiring. Mounting screws aren't included, so plan on four screws that suit your wall. Leave 4 to 6 inches (10 to 15 cm) of cable slack.
This May Be A Good Fit If
- You own a Rich Solar NOVA SWITCH or NOVA SUPERCHARGER series inverter
- You want to check and adjust the inverter from your phone
- Your inverter is installed out of easy reach
- You want a flush wall panel as well
Common Questions
Which Inverters Does the RS-RM03 Work With?
Rich Solar lists the NOVA SWITCH and NOVA SUPERCHARGER series inverters.
How Do I Know the Remote Is in Pairing Mode?
After you press and hold ESC, two flashing horizontal lines appear beneath the left and right numbers on the screen.
Do I Still Need the Cable?
Yes. The panel connects to the inverter through the included 6-conductor cable, and the app pairs with the remote panel over Bluetooth.
What's Included
- 1 x RS-RM03 Remote Panel
- 1 x 6-Conductor Cable Kit
- 1 x User Guide
Wall and App Control for Your NOVA Inverter
The Rich Solar RS-RM03 Bluetooth Inverter Remote gives your NOVA SWITCH or NOVA SUPERCHARGER inverter a flush wall panel plus app control over Bluetooth. If you have questions about fit or installation, the Outbound Power team is happy to help.
Rich Solar Bluetooth Inverter Remote Control With LCD for NOVA SWITCH and SUPERCHARGER RS-RM03 Specifications
|
| Model |
RS-RM03 |
| Compatibility |
| Compatible Inverters |
NOVA SWITCH and NOVA SUPERCHARGER series |
| Display and Controls |
| Display |
HD backlit LCD |
| Monitoring |
Power, voltage, current, load, battery status |
| Indicators |
Dual-color LED, fault code, buzzer |
| Control Functions |
ON/OFF, mode selection, settings |
| Buttons |
ESC, scroll, setting, power |
| Backlight |
On with any button press, off after 60 seconds idle |
| Listed Functions |
Bypass mode; AGM, lithium and user-defined charging profiles |
| Power Sources Supported |
Solar PV, utility, battery |
| Connectivity |
| Bluetooth |
Yes (RICH SOLAR app, Android or iOS) |
| Connection |
RJ12 plug and play |
| Cable |
6-conductor communication cable kit |
| Physical |
| Housing Material |
Flame-retardant ABS |
| Mounting |
Flush wall mount |
| Dimensions |
5.51 x 3.54 x 1.54 in (140 x 90 x 39 mm) |
| Cut-Out Size |
4.33 x 2.32 in (110 x 59 mm) |
| Minimum Recess Depth |
1.97 in (50 mm) |
| Mounting Hole Spacing |
4.69 x 2.76 in (119 x 70 mm) |
| Recommended Mounting Height |
59 in (1.5 m) |
| Package Dimensions |
8 x 7 x 3 in |
| Gross Weight |
2 lb |
Rich Solar Bluetooth Inverter Remote Control With LCD for NOVA SWITCH and SUPERCHARGER RS-RM03 Manuals and Documents
Rich Solar RS-RM03 Bluetooth Remote Panel User Guide
Rich Solar RS-RM02 and RS-RM03 Remote Specification Sheet