Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The BougeRV 12V ShadePower Arch Pro Flexible Solar Kit packages flexible solar panels, an MPPT charge controller, LiFePO4 batteries and a pure sine wave inverter into one 12V system. Choose the 200W, 600W or 800W kit size. Every size pairs each Arch Pro 200W N-type TOPCon flexible panel with one 12V 100Ah Group 24 LiFePO4 battery.
BougeRV designed the Arch Pro panel for RVs, vans and off-grid systems where shade from roof fixtures or the surroundings can't be avoided. The panels weigh 7.9 lbs each and attach with adhesive instead of a frame, and you add the fuses, cables and mounting materials that fit your installation.
The 200W kit has one panel, one battery, a Sunflow 40A MPPT controller and a 2000W inverter. The 600W kit has three panels, three batteries, the Sunflow 40A and the 2000W inverter. The 800W kit has four panels, four batteries, a Sunflow 60A MPPT controller and a 3000W inverter.
BougeRV says ShadePower technology lets each Arch Pro panel sustain up to 130W when 33% of its surface is shaded. Each panel uses 28 bypass diodes to help prevent hot spots and localized overheating.
Each panel is rated 200W with 25% solar cell efficiency and a 16BB cell design. The manual rates it at 31V Vmp, 6.46A Imp, 36V Voc and 6.77A Isc, each ±5%, with a 1000V DC max system voltage. It measures 53 x 31 x 0.1 inches and weighs 7.9 lbs, with two 33.5 inch (850 mm) 14AWG leads.
The Sunflow 40A accepts up to 600W of solar on a 12V battery, and the Sunflow 60A accepts up to 900W. Both take up to 100V of PV input, list MPPT tracking efficiency above 99% and charging conversion efficiency above 95%, and let you set charging current in 1A steps. Built-in Bluetooth lets you check and adjust settings from your phone.
Each BV12100 battery is 12.8V and 100Ah, rated for 4000 cycles at 25°C, 0.2C and 100% depth of discharge, with 100A continuous discharge and an IP65 rating. BougeRV lists six BMS protections: overvoltage, undervoltage, overcurrent, short circuit, overheating and low temperature charging. Charging stops at 32°F (0°C) and resumes at 35.6°F (2°C).
The 2000W inverter delivers 4000W peak for one second, and the 3000W inverter delivers 6000W peak. Both produce 120VAC with total harmonic distortion under 5%, include a wired remote display and Bluetooth app control, and protect against input over-voltage, over-discharge, overload, short circuit, over-temperature and ground faults.
RV roofs with vents and fixtures. Mount the panels where roof parts cast shadows and let the ShadePower design keep them charging.
Camper vans. Keep a low roof profile with 0.1 inch panels and power 120VAC devices from the inverter.
Off-grid cabins and outbuildings. Store solar energy in LiFePO4 batteries and draw AC power for lights and small appliances.
Starting small. Begin with the 200W kit for light loads or choose the 800W kit for more solar input and storage.
The 200W kit is a one-panel, one-battery system for lighter daily use. The 800W kit has four times the panels and batteries, steps up to the Sunflow 60A controller and moves to the 3000W inverter for larger AC loads. The 600W kit sits between them with three panels and three batteries on the 40A controller and 2000W inverter.
A framed rigid panel usually mounts on brackets above the roof. The Arch Pro is 0.1 inch thick, bonds to the roof with sealant and is built to keep producing when part of its surface is shaded.
BougeRV lists these as purchased separately: solar panel mounting brackets, MC4 fuses, MC4 extension cables, an MC4 crimping tool, controller-to-battery cables, battery-to-inverter cables and a battery-to-inverter fuse or breaker. The panel manual calls for a polyurethane sealant strip at least 0.25 inch wide every 6.5 inches, space for airflow, extra adhesive on the windward edge and 48 hours to cure.
Connect the battery to the controller before the panels, set the battery type to LiFePO4 and keep the array within the controller's 100V input and rated current. BougeRV doesn't publish a panel wiring plan for these kits. Fully charge each battery before connecting them and let them rest 12 to 24 hours after a parallel connection. The inverters work only on 12V, have no reverse polarity protection and need a DC fuse or breaker rated 2 to 2.5 times their rated input current, within 150 mm of the battery. The 3000W inverter does not include battery cables, and its manual recommends 4/0 AWG.
The 200W and 600W kits include the Sunflow 40A MPPT controller and the 2000W inverter. The 800W kit includes the Sunflow 60A MPPT controller and the 3000W inverter.
BougeRV's battery manual allows up to four batteries in parallel for 400Ah, or up to four in series for 48V. When connecting both ways, connect in parallel first.
Yes. BougeRV's panel manual says a power station with an MC4-equipped cable can connect to the panel directly, without the charge controller. Confirm the power station's solar input limits first.
BougeRV lists 5 years material and workmanship for the panels, 5 years for the batteries and 18 months for the inverters.
The 600W kit size includes 3 x ArchPro Solar Panel 200W, 1 x 40A MPPT Solar Controller, 3 x 12V 100Ah LiFePO4 Battery and 1 x 12V 2000W Inverter. The 800W kit size includes 4 x ArchPro Solar Panel 200W, 1 x 60A MPPT Solar Controller, 4 x 12V 100Ah LiFePO4 Battery and 1 x 12V 3000W Inverter.
The BougeRV 12V ShadePower Arch Pro Flexible Solar Kit matches thin 200W ShadePower panels with LiFePO4 storage, a Sunflow MPPT controller and a pure sine wave inverter in 200W, 600W or 800W sizes. If you'd like help choosing a kit size or planning cables and fusing, the Outbound Power team is happy to help.
BougeRV 12V ShadePower Arch Pro Flexible Solar Kit Specifications |
|
|---|---|
| Kit Contents | |
| 200W Kit | 1 x ArchPro 200W Solar Panel, 1 x 40A MPPT Solar Controller, 1 x 100Ah LiFePO4 Battery, 1 x 12V 2000W Inverter |
| 600W Kit | 3 x ArchPro Solar Panel 200W, 1 x 40A MPPT Solar Controller, 3 x 12V 100Ah LiFePO4 Battery, 1 x 12V 2000W Inverter |
| 800W Kit | 4 x ArchPro Solar Panel 200W, 1 x 60A MPPT Solar Controller, 4 x 12V 100Ah LiFePO4 Battery, 1 x 12V 3000W Inverter |
| System Voltage | 12V |
| Solar Panel (Each) | |
| Model | Arch Pro 200W N-Type TOPCon Flexible Solar Panel (SKU SP004) |
| Maximum Power | 200W ±5% |
| Solar Cell Efficiency | 25% |
| Max Power Voltage (Vmp) | 31V ±5% |
| Max Power Current (Imp) | 6.46A ±5% |
| Open Circuit Voltage (Voc) | 36V ±5% |
| Short Circuit Current (Isc) | 6.77A ±5% |
| Max System Voltage | 1000V DC |
| Series Fuse Rating | 15A |
| Cell Design | 16BB N-Type TOPCon |
| Bypass Diodes | 28 |
| Shade Performance | Up to 130W with 33% of the surface shaded (BougeRV) |
| Product Type | Curved solar panel |
| Temperature Coefficient of Pmax | -0.35%/K |
| Temperature Coefficient of Voc | -0.3%/K |
| Temperature Coefficient of Isc | +0.048%/K |
| Operating Temperature Limits | -40°F to +185°F (-40°C to +85°C) |
| Leads | 2 x 33.5 in (850 mm), 14AWG |
| Dimensions | 53 x 31 x 0.1 in (1345 x 785 x 2.5 mm) |
| Weight | 7.9 lbs (3.6 kg) |
| Charge Controller | |
| Model | Sunflow 40A (BJ2440N) in 200W and 600W kits, Sunflow 60A (BJ2460N) in 800W kit |
| System Voltage | 12V/24V |
| Rated Charging Current | 40A or 60A |
| Charging Current Setting | 0 to rated current, 1A steps |
| Battery Types | Sealed, gel, flooded, lithium (LiFePO4), custom |
| Maximum PV Input Power, 40A | 600W at 12V, 1200W at 24V |
| Maximum PV Input Power, 60A | 900W at 12V, 1800W at 24V |
| Maximum PV Input Voltage | 100V (95V protection, 90V recovery) |
| MPPT Operating Voltage Range | Battery voltage +2V to 72V |
| MPPT Tracking Efficiency | >99% |
| Charging Conversion Efficiency | >95% |
| Rated Load Current | 20A |
| Lithium Low Temperature Charging Protection | Stops at 32°F (0°C), resumes at 35.6°F (2°C), sensor required, off by default |
| Communication | Bluetooth, RS485, TTL, CAN optional (RV-C) |
| Historical Data | Last 200 days |
| Operating Temperature | -31°F to 149°F (-35°C to 65°C) |
| Protection Grade | IP34 |
| Dimensions, 40A | 227 x 159.6 x 75 mm |
| Dimensions, 60A | 263 x 186 x 85 mm |
| Weight, 40A | 1789 g |
| Weight, 60A | 2503 g |
| Battery (Each) | |
| Model | BV12100 |
| Chemistry | LiFePO4 |
| Group Size | Group 24 |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 100Ah |
| Energy | 1280Wh |
| Charge Voltage | 14.4V to 14.6V |
| Standard Charge Current | 20A (0.2C) |
| Maximum Charge Current | 100A (1C) |
| Maximum Continuous Discharge Current | 100A (1C) |
| Maximum Discharge Current | 330A (2.5 s) |
| Cycle Life | 4000 (25°C, 0.2C, 100% DOD) |
| BMS Protection | Overvoltage, undervoltage, overcurrent, short circuit, overheating, low temperature charging |
| Charge Temperature Range | 32°F to 149°F (0°C to 65°C) |
| Discharge Temperature Range | -4°F to 167°F (-20°C to 75°C) |
| Low Temperature Charging Protection | 32°F (0°C), resumes at 35.6°F (2°C) |
| Max in Series | 4 (48V) |
| Max in Parallel | 4 (400Ah) |
| Charge Method | CC/CV |
| Protection Rating | IP65 |
| Terminals | M8 |
| Dimensions | 10.24 x 6.61 x 8.23 in (260 x 168 x 209 mm) |
| Weight | 24.25 lbs |
| Inverter | |
| Model | SI122000 (2000W) in 200W and 600W kits, SI123000 (3000W) in 800W kit |
| Rated Output Power | 2000W or 3000W |
| Peak Power | 4000W or 6000W (1 s) |
| Overload Power | 2300W or 3200W |
| Output Voltage | 120VAC |
| Output Frequency | 50/60 Hz (change in app) |
| Output Waveform | Pure sine wave |
| Total Harmonic Distortion | <5% |
| Rated Input Voltage | 12VDC |
| Input Voltage Range | 10.5V to 15.5VDC |
| Maximum Output Efficiency | >90% |
| Full Load Efficiency | >85% |
| No-Load Loss | ≤0.6A (2000W), ≤1A (3000W) |
| AC Output Terminals, 2000W | 1 x 15A, 1 x 20A |
| AC Output Terminals, 3000W | 2 x 15A, 1 x 20A |
| AC High Power Link Port | Yes |
| USB Port | 18W (5V 3.4A, 9V 2A, 12V 1.5A) |
| Communication | RS485 (remote control), Bluetooth (app) |
| Protection Functions | Input over-voltage, over-discharge, output overload, short circuit, over-temperature, ground fault |
| Input Reverse Polarity Protection | None |
| Operating Temperature | 14°F to 104°F (-10°C to 40°C) |
| Battery Cables | 2 x 3 ft 2AWG with 2000W; not included with 3000W (4/0 AWG recommended) |
| Dimensions, 2000W | 14.96 x 7.4 x 3.94 in (380 x 188 x 100 mm) |
| Dimensions, 3000W | 17.12 x 9.37 x 3.94 in (435 x 238 x 100 mm) |
| Weight, 2000W | 8.4 lb (3.8 kg) |
| Weight, 3000W | 12.79 lb (5.8 kg) |
| Warranty | |
| Solar Panels | 5 years material and workmanship |
| Batteries | 5 years |
| Inverters | 18 months |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
