BougeRV 41in Solar Panel Tilt Mount Brackets (Upgraded Version)

The BougeRV 41in Solar Panel Tilt Mount Brackets (Upgraded Version) Come Pre-Riveted So You Set the Angle and Lock It in One Step

The BougeRV 41in Solar Panel Tilt Mount Brackets (Upgraded Version) hold a rigid solar panel at any angle from 0° to 90°. The rails and tilt bracket come pre-assembled with fixed rivets, so you lock the angle once with the black knob bolt.

They suit RV roofs and other installs where you tilt a panel toward the sun, then fold it down to drive or store. BougeRV gives them a 300W maximum.

BougeRV 41in Solar Panel Tilt Mount Brackets (Upgraded Version) Features

One-Step Setup With Fixed Rivets

Instead of locking three points as on BougeRV's earlier design, you lock the angle once, and BougeRV says one person can handle it.

Tilt From 0° to 90°, Then Fold Down

Adjust the angle as the seasons change, then fold the brackets down and lock them for driving. BougeRV says a tilted panel can collect up to 50% more solar energy than one mounted flat.

Matched Holes for Storage

BougeRV says this version fixes an earlier bracket misalignment issue. The holes line up, and a U-shaped groove helps the brackets fit together when stored.

Aluminum Rated for 120 kg

The 41 in rails are aluminum alloy that BougeRV describes as rust-free. BougeRV rates the bearing weight at 120 kg, and one set weighs 5.99 lb.

Real-World Applications

RV roofs. Raise a panel toward the sun at camp and fold it down before you drive.

Seasonal aiming. Re-aim the panel as the seasons change.

Larger arrays. The 2 PCS and 3 PCS options add more bracket sets in one order.

Practical Comparison

Pre-Assembled Brackets Versus Separate-Part Brackets

Separate rails and legs must be assembled first. These come riveted, so you fix the bracket to the panel, pull up the tilt bracket and lock the knob.

Tilt Mount Versus Flat Mount

A flat mount keeps the panel parallel to the roof. A tilt mount lets you aim it at the sun.

Buyer Guidance

Checking Panel Size

BougeRV's sizing chart lists the 41 in brackets for 100W and 120W panels mounted vertically and 100W, 180W, 200W and 300W panels mounted horizontally. Measure your panel before you order.

This May Be A Good Fit If

• Your rigid panel is 300W or less
• You want to lock the angle in one step
• You fold your panel down to drive

Common Questions

What Angles Can I Set?

Anywhere from 0° to 90°. BougeRV's diagram marks 30°, 45°, 60° and 90°.

How Long Are the Parts?

The rails are 41 in and the support arm is 22.6 in.

How Much Weight Can They Hold?

BougeRV rates them for 120 kg.

What's Included

• 2 x Aluminum Mounting Bracket
• 4 x Steel Knob Bolt
• 4 x Steel Wing Nut
• 4 x Steel Flange Nut
• 4 x Steel Split Lock Washer
• 4 x Steel Flat Washer
• 4 x Steel Hex Bolt
• 4 x Steel Self-Tapping Screw
• 4 x Plastic Retaining Ring

The 2 PCS and 3 PCS options include two or three of these sets.

Set the Angle Once and Go

The BougeRV 41in Solar Panel Tilt Mount Brackets (Upgraded Version) give a rigid panel up to 300W a 0° to 90° tilt on riveted aluminum brackets rated for 120 kg. If you'd like help checking the fit with your panel, the Outbound Power team is happy to help.