Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The Go Power! 10 Amp MPPT Solar Controller (model GP-RVC-10-MPPT) is a compact maximum power point tracking charge controller for 12 volt battery systems with up to 150 watts of solar. It continuously tracks the panel's maximum power point, converts power at up to 98% efficiency and accepts panel strings up to 100 volts open circuit.
It's made for vans, truck campers and small trailers that keep a battery topped up with one 100 or 150 watt panel. RV-C and RS485 communication let it show up on a PowerTrak or other RV-C display, and the optional GP-RVC-R remote adds a wall display and Bluetooth.
The controller watches the panel's output and adjusts to stay near its maximum power point as sunlight and temperature change. When partial shade creates several power peaks, its multi-peak tracking looks for the right one. The manual lists MPPT tracking efficiency above 99%. If the array could push more than the rated 10 amps, the controller limits charging power to its rated current.
Choose GEL, AGM, Flooded, LiFePO4 or a Custom profile. Bulk and absorption are 14.1 volts for GEL and 14.4 volts for AGM, Flooded and LiFePO4, with a 120-minute absorption by default. Float is 13.7 volts for lead acid and 14.0 volts for LiFePO4. Flooded batteries get a 14.9 volt equalize charge every 30 days by default, and lead acid profiles use -24 mV per °C temperature compensation.
If a lithium battery's BMS has shut it off after over-discharge, the controller's lithium reset can bring it back automatically without disconnecting the battery. The controller also warns at 12.0 volts and treats 11.0 volts as over-discharge, clearing the fault once the battery recovers to 12.8 volts (12.2 volts for LiFePO4).
An RV-C connector and a remote port sit on the controller. On an RV-C network the controller appears on a PowerTrak or other RV-C display without a remote, and you can assign it one of 5 instance numbers with the SET button and LEDs. Add the GP-RVC-R remote for a wall-mounted readout and Bluetooth monitoring in the Go Power! Connect app.
Battery and PV LEDs show charging stage and faults at a glance, and the controller stores historical data. No-load draw is 8 mA. The case measures 6.1 x 3.3 x 1.8 inches, weighs 0.67 pounds and is rated IP30 for protected indoor mounting.
Camper vans. Get more daily charge from one roof panel than a controller that runs the panel at battery voltage.
Truck campers and small trailers. Keep a single 12 volt battery topped up between trips.
RV-C equipped coaches. See solar charging on a PowerTrak or other RV-C display alongside the rest of your system.
Go Power's comparison lists the GP-RVC-30-MPPT at 30 amps and 600 watts at 12 volts (1,200 watts at 24 volts), charging two battery banks with house priority. The 10 amp model charges one bank from up to 150 watts. Go Power suggests the 30 amp model for 200 watts or more, or for two banks.
As Go Power explains it, a PWM controller connects the panel to the battery, so the panel runs at battery voltage. An MPPT controller converts the panel's higher voltage into extra charge current and lets you wire panels in series, which helps on long cable runs.
Keep total solar at 150 watts on a 12 volt bank and total open circuit voltage under 100 volts. Go Power suggests 10 AWG from controller to battery with a 15 amp fuse at the battery, and 10 AWG from the panel for runs up to about 25 feet. Keep the battery fuse within 150 mm of the battery terminal. Connect the battery before the panel, and disconnect the panel first when servicing. Go Power estimates about 30Ah per 100 watts per day in spring and summer and 12Ah in fall and winter.
Mount it indoors on a non-flammable surface, out of direct sun and away from water or condensation. Mount it vertically with the power terminals facing down and at least 6 inches of air above and below, close to the battery but not directly above it. Go Power states it is not UL listed and is sold for aftermarket and do-it-yourself installation, not for OEM production.
Up to 150 watts at 12 volts, such as one 100 or 150 watt panel, with open circuit voltage under 100 volts. Go Power notes that two 100 watt panels exceed the power limit.
The controller itself has status LEDs. The optional GP-RVC-R remote adds a wall display and Bluetooth for the Go Power! Connect app, and an RV-C display shows it over the network without the remote.
Yes. Select the LiFePO4 profile for a 14.4 volt absorption and 14.0 volt float with no equalization, or use a Custom profile matched to your battery maker's specs.
Go Power lists a 5-year warranty against defects in materials and workmanship.
The Go Power! 10 Amp MPPT Solar Controller brings MPPT tracking, lithium-ready profiles and RV-C communication to a small 12 volt system in a compact case. If you'd like help choosing a panel, wiring or the GP-RVC-R remote, the Outbound Power team is happy to help.
Go Power! 10 Amp MPPT Solar Controller With RV-C Specifications |
|
|---|---|
| Model | GP-RVC-10-MPPT |
| Charging | |
| Controller Type | MPPT |
| Rated Charge Current | 10A |
| Battery Banks | 1 |
| Conversion Efficiency | Up to 98% |
| MPPT Tracking Efficiency | Above 99% |
| Battery Profiles | GEL, AGM, Flooded, LiFePO4, Custom |
| Bulk/Absorption Voltage | 14.1V GEL; 14.4V AGM, Flooded, LiFePO4 |
| Absorption Duration | 120 min (default) |
| Float Voltage | 13.7V GEL, AGM, Flooded; 14.0V LiFePO4 |
| Equalize | 14.9V, Flooded only, 120 min every 30 days (default) |
| Recharge Voltage | 13.2V |
| Temperature Compensation | -24 mV/°C (lead acid) |
| Solar Input | |
| Max PV Input Power | 150W |
| Max PV Open Circuit Voltage | Under 100V |
| Panel Wiring | Series or parallel |
| Battery | |
| System Voltage | 12V |
| Battery Voltage Range | 8 - 16V |
| Under-Voltage Warning | 12.0V |
| Over-Discharge Voltage | 11.0V |
| Over-Discharge Return | 12.8V lead acid, 12.2V LiFePO4 |
| Battery Types | GEL, AGM, Flooded, LiFePO4, Custom |
| Monitoring and Communication | |
| Communication | RS485, CANbus, RV-C |
| Indicators | Battery and PV status LEDs, 5 RV-C instance LEDs |
| RV-C Instances | Up to 5 |
| Remote | Optional GP-RVC-R (LCD and Bluetooth) |
| No-Load Loss | 8 mA |
| Protection | |
| Protection | Solar/battery reverse polarity, solar/battery over voltage, solar/battery short circuit, over temperature, over-discharge |
| Physical | |
| Dimensions | 6.1 x 3.3 x 1.8 in (155 x 86 x 45.6 mm) |
| Weight | 0.67 lb (300 g) |
| Max Wire Gauge | 8 AWG |
| Grounding | Negative |
| Operating Temperature | -31 to 113°F (-35 to 45°C) |
| Storage Temperature | -31 to 167°F (-35 to 75°C) |
| Humidity | 95% non-condensing |
| Ingress Protection | IP30 |
| Altitude | Under 3,000 m |
| Certifications and Warranty | |
| Certification | Not UL listed (aftermarket/DIY installation) |
| Warranty | 5 years |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
