EARLY BLACK FRIDAY SALE IS LIVE  |  SHOP NOW WITH OUR PRICE DROP GUARANTEE →
EARLY BLACK FRIDAY SALE IS LIVE  |  SHOP NOW →
Skip to content

Go Power! 220-Watt Solar Flex™ Kit

|
SKU: GP-FLEX-220
$887.99

Early Black Friday Price Drop Guarantee

  • Buy now, and if our price drops by Black Friday, we'll refund the difference.
  • Found it lower elsewhere? We'll beat it.

We Beat Any Price

Found the same price or less? Just ask & we'll beat it.

Availability: Translation missing: en.general.icons.icon_check_circle icon 50 in stock, ready to be shipped

The Go Power! 220-Watt Solar Flex Kit Charges Your RV or Boat Battery From Two Thin Bendable Panels and a 30A Bluetooth Controller

The Go Power! 220-Watt Solar Flex Kit is a 12-volt solar charging kit with two 110W flexible monocrystalline panels, a GP-SB-PWM-30BT 30 amp single-bank PWM controller with Bluetooth, 25 ft red and black #10 solar output cables, solar connectors and mounting hardware.

Go Power built it for RVs and boats. The panels are only 3 mm thick and conform to almost any surface, and Go Power suggests pairing the kit with about 200Ah of AGM battery capacity or 100Ah of lithium.


Go Power! 220-Watt Solar Flex Kit Features

220 Watts From Two Flex Panels

Together the two panels are rated 220W, with a maximum power voltage of 19.7V, maximum power current of 12.0A, open circuit voltage of 22.9V and short circuit current of 13.0A. Each panel measures 44.6 x 21.4 x 0.1 in, and the pair weighs 5.82 lb.

Bends Up to 30 Degrees

An impermeable lamination coats each module so it can contour and flex against curved surfaces. Go Power rates the panels for a bend of up to 30 degrees, so you don't need custom mounts. Go Power also says the thin, low-profile design is more aerodynamic than traditional rigid solar modules.

Adhesive or Screw Mounting

You can attach the panels with adhesive or with screws through the grommets provided. Go Power says the modules are 82% lighter, which suits lightweight RVs. Sealant and adhesive are not included, since the right product depends on your roof membrane.

A 30A PWM Controller With Bluetooth

The GP-SB-PWM-30BT is a 12-volt, flush-mounted, single-bank controller rated for a continuous solar input of 30 amps and up to 600W of solar. It has an LCD screen, and Bluetooth lets you monitor the system in Go Power's free Go Power! Connect app. It installs with a screw cover plate.

Protection Against Wiring Errors

Go Power lists protection against battery and solar reverse polarity, short circuit and reverse current, battery and solar over voltage up to 50V, over temperature and over current. The controller is temperature compensated and rated to operate from -40 to 140°F.


Real-World Applications

RV trips away from hookups. The kit charges your 12V battery bank from the sun, and Go Power sizes it for about 200Ah of AGM or 100Ah of lithium battery.

Boats. Go Power designed the kit for boats as well as RVs. For marine use, the Solar Flex manual strongly recommends flame-retardant, chemically resistant cables and a mounting structure that stays rigid in heavy storms and resists long-term saltwater exposure.

Curved and lightweight roofs. The panels follow curves up to 30 degrees and add little weight, which suits truck campers, vans and lightweight RVs.


Practical Comparison

220-Watt Solar Flex Kit Versus the 110-Watt Solar Flex Kit

Both kits use the same 110W Solar Flex panel and GP-SB-PWM-30BT controller. The 110-watt kit has one panel with 6.0A of maximum power current. The 220-watt kit doubles that to two panels and 12.0A.

Solar Flex Panels Versus Rigid Panels

Go Power says the Solar Flex design is more aerodynamic than traditional rigid modules and that its modules are 82% lighter. A rigid panel relies on its frame and mounting hardware, while the Solar Flex panels lie less than 1/8 in thick on the roof.


Buyer Guidance

Plan the Mounting

The Solar Flex manual says the mounting surface must stay rigid in all weather, and the panels will not stay flexible once fixed down. Flexing of the surface can damage the panels or cause a fire. Position the panels before you glue them, because they can't be moved afterward. Keep them close together, at least 3 ft back from the front of the RV, over a flat, fire-resistant roof covering, and clear of shade from air conditioners and vents.

Wiring and Battery

Go Power recommends installation by an RV technician or professional electrician. The manual says the array's open circuit voltage must not exceed 28 volts, the combined maximum power current must not exceed 30A, and the sum of the panels' short circuit currents in parallel, times 1.25, must stay within the controller's rating. Mount the controller vertically indoors, protected from the weather. The manual's wiring diagram shows a 30A fuse on the positive battery cable.

This May Be A Good Fit If

  • You have a 12V RV or boat battery bank
  • You run about 200Ah of AGM or 100Ah of lithium
  • Your roof is curved or weight-sensitive
  • You want Bluetooth monitoring on your phone

Common Questions

What Battery Size Does Go Power Suggest?

About 200Ah of AGM battery or 100Ah of lithium.

Can I Check Charging From My Phone?

Yes. The GP-SB-PWM-30BT connects by Bluetooth to the free Go Power! Connect app.

Is Adhesive Included?

No. Sealant and adhesive depend on your roof membrane, so use the product your RV maker recommends.

What Warranty Does Go Power Give?

Go Power lists a 5-year power output warranty on the solar panels and a 5-year warranty on the controller.


What's Included

  • 2 x 110W Solar Flex Solar Panels
  • 1 x GP-SB-PWM-30BT 30A PWM Bluetooth Solar Controller
  • 1 x Red Solar Output Cable, 25 Ft, #10
  • 1 x Black Solar Output Cable, 25 Ft, #10
  • 1 x Set of Mounting Hardware

Flexible Solar for RVs and Boats

The Go Power! 220-Watt Solar Flex Kit pairs two thin, bendable 110W panels with a 30A Bluetooth PWM controller and 25 ft cables to keep your 12V battery charged. If you'd like help sizing your battery bank or planning the install, the Outbound Power team is happy to help.


Go Power! 220-Watt Solar Flex™ Kit Specifications

Model GP-FLEX-220
Kit Contents
Solar Panels 2 x 110 W Solar Flex, monocrystalline
Charge Controller 1 x GP-SB-PWM-30BT, 30 A PWM, Bluetooth
Solar Output Cables 1 x 25 ft red, 1 x 25 ft black, #10
Mounting Hardware Included
Solar Panels
Total Rated Power (Pm) 220 W
Max Power Voltage (Vmp) 19.7 V
Max Power Current (Imp) 12.0 A (both panels)
Open Circuit Voltage (Voc) 22.9 V
Short Circuit Current (Isc) 13.0 A (both panels)
Cell Type Monocrystalline
Solar Cell Efficiency 21%
Series Fuse Rating 10 A
Max System Voltage 600 VDC
Max Recommended Bend 30°
Materials Laminated TPT backsheet, stainless steel grommets
Attachment Adhesive or screws, grommets provided
Lead Length 24 in (0.61 m)
Junction Box IP67 (junction box maker's rating)
Charge Controller
Controller Model GP-SB-PWM-30BT
Type PWM, single bank, flush mount
Nominal System Voltage 12 V
Max Solar Array Current 30 A
Max Solar Power 600 W
Max Battery Charge Current 37.5 A
Battery Voltage Range 6 V to 15.5 V
Max Solar Panel Input Voltage 28 V
Operating Consumption 6 mA
Display Consumption 15 mA or less
Temperature Compensation -24 mV/°C (-13 mV/°F)
Operating Temperature -40 to 140°F (-40 to 60°C)
Humidity 99% non-condensing
Max Wire Gauge #8 AWG (10 mm2)
Bluetooth Yes, Go Power! Connect app
Protection Battery/solar reverse polarity, short circuit and reverse current; battery/solar over voltage up to 50 V; over temperature; over current
Dimensions (H x W x D) 5.87 x 3.86 x 1.26 in (149 x 98 x 32 mm)
Weight 9.2 oz (260 g)
Mounting Vertical, indoors
Array Limits
Max Array Voc 28 V
Max Array Imp 30 A
Current Sizing Sum of parallel Isc x 1.25, within controller rating
Battery Fuse 30 A, positive cable (manual wiring diagram)
Battery
Suggested Battery Bank 200 Ah AGM or 100 Ah lithium
System Voltage 12 V
Physical
Panel Dimensions (each) 44.6 x 21.4 x 0.1 in (1134 x 544 x 3 mm)
Panel Thickness Less than 1/8 in (3 mm)
Panel Weight (both) 5.82 lb
Warranty
Solar Panels 5 years power output
Charge Controller 5 years

Go Power! 220-Watt Solar Flex™ Kit Manuals and Documents

Go Power! Solar Flex Kits Manual (GP-FLEX-220)

Go Power! Solar Flex Kits Manual (GP-FLEX-220) for the Go Power! 220-Watt Solar Flex™ Kit

Go Power! Solar Flex Kits Spec Sheet

Go Power! Solar Flex Kits Spec Sheet for the Go Power! 220-Watt Solar Flex™ Kit

Common Customer Questions

Get answers to the most frequently-asked questions customers ask before placing an order.

Is Outbound Power an Authorized Dealer?

Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.

How long will it take for my order to arrive?

Shipping times vary depending on your location and the product or products ordered.

Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.

After order processing is complete, you will receive tracking information to monitor your order while it is in transit.

Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.

Please refer to the product page for your item and reference the estimated delivery time frame for more details.

Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.

What are your shipping rates? Do you offer free shipping?

Everything on our store ships for free. Really!

What is Outbound Power's return policy?

Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.

Are Outbound Power products used/old/refurbished?

Everything sold on our website is brand-new.

Do you price match?

No — we price BEAT! Please refer to our Price Beat Promise for full details.