The Go Power! Solar Branch Connector 2 Male to 1 Female Combines Two Panel Outputs Into One Run With Tool-Free Plug-In Connections
The Go Power! Solar Branch Connector 2 Male to 1 Female (SC-BC-1F2M) combines the output of two solar panels into a single solar connector (SC) connection. It's built for parallel wiring, where two panels feed one run to your system.
It's compatible with Go Power! solar panels, including all Solar Flex and rigid panels, and with most standard SC solar systems. Pair it with the SC-BC-1M2F for a complete parallel wiring setup on an RV, van, truck or boat.
Go Power! Solar Branch Connector 2 Male to 1 Female Features
Two Panel Outputs, One Connection
The 2 male to 1 female layout brings two panel outputs together, so both panels share a single run.
Snaps Together Without Tools
The interlocking plug-and-play connectors snap securely into place without tools. A locking-type design keeps each mated connection together.
Made for Long-Term Outdoor Use
The connector is UV-resistant and rated for outdoor solar panel use. It's rated IP67 when mated and works in ambient temperatures from -40°F to 185°F (-40°C to 85°C). Its ratings are 1500 V DC (UL) and 50 A, and it's a UL recognized component in accordance with UL 6703.
Real-World Applications
Two-panel RV arrays. Join two roof panels in parallel and carry their output on a single run.
Matched parallel pairs. Use it with the SC-BC-1M2F to complete the parallel connection between two panels.
Practical Comparison
A Mated Branch Connector Versus an Open Connection
When it's plugged together, the connector is rated IP67. An unmated connection is rated only IP2X, so it must be protected by a sealing cap. Cap any open end until it's connected.
Buyer Guidance
Plan the Pair
Pair this connector with the SC-BC-1M2F for a complete parallel wiring setup. Check that your panel leads use SC connectors, and keep your array within the 1500 V DC and 50 A ratings.
This May Be A Good Fit If
- You're wiring two solar panels in parallel
- Your panels or cables use SC connectors
- You want one combined run from two panels
- You'd like plug-in connections with no tools
Common Questions
What Does It Pair With?
It pairs with the SC-BC-1M2F branch connector for a complete parallel wiring setup.
Will It Work With My Go Power! Panels?
Yes. It's compatible with all Go Power! Solar Flex and rigid solar panels, and with most standard SC solar systems.
How Is It Protected Outdoors?
It's UV-resistant, rated for outdoor solar panel use and rated IP67 once mated. Protect any unmated connection with a sealing cap.
What's Included
- 1 x Solar Branch Connector, 2 Male to 1 Female
Two Panels, One Clean Connection
The Go Power! Solar Branch Connector 2 Male to 1 Female joins two panel outputs into one SC connection that snaps together without tools and is rated IP67 when mated. If you'd like help pairing connectors for your array, the Outbound Power team is happy to help.
Go Power! Solar Branch Connector 2 Male to 1 Female Specifications
|
| Model |
SC-BC-1F2M |
| Configuration |
| Configuration |
2 Male to 1 Female |
| Connector Type |
Solar connector (SC) compatible |
| Use |
Parallel solar panel wiring |
| Connection |
Tool-free, snaps securely into place |
| Locking System |
Locking type (UL) |
| Compatible Panels |
All Go Power! Solar Flex and rigid solar panels |
| Electrical |
| Connector System |
4 mm diameter |
| Rated Voltage |
1500 V DC (UL) |
| Rated Current |
50 A |
| Rated Impulse Voltage |
12 kV |
| Contact Resistance |
0.5 milliohm or less |
| Overvoltage Category / Pollution Degree |
CAT III / 2 |
| Safety Class |
II |
| Environmental |
| Outdoor Use |
Rated for outdoor solar panel use |
| Degree of Protection, Mated |
IP67 |
| Degree of Protection, Unmated |
IP2X (protect with a sealing cap) |
| UV Resistance |
UV-resistant |
| Ambient Temperature Range |
-40°F to 185°F / -40°C to 85°C (UL) |
| Upper Limiting Temperature |
221°F / 105°C |
| Materials |
| Contact System |
MULTILAM |
| Contact Material |
Tin-plated copper |
| Insulation Material |
PC |
| Flame Class |
UL94-V0 |
| Certification |
| UL Recognized Component |
In accordance with UL 6703 (E343181) |
Go Power! Solar Branch Connectors Spec Sheet