The Renogy Bifacial 590W N-Type Solar Panel Captures Sunlight From Both Sides for Up to 177W of Extra Power
The Renogy Bifacial 590W N-Type Monocrystalline Solar Panel is a large-format panel for home, cabin, farm and commercial ground-mount arrays. Its front side produces 590 watts at standard test conditions, and the transparent back side collects light reflected from the ground, adding up to 177W more depending on the surface below. N-type cells reach 25% cell efficiency and 22.8% module efficiency.
A low temperature coefficient keeps output strong in hot climates, a 16 busbar design improves energy conversion and durability, and an IP68 junction box resists water and dust. Renogy backs the panel with a 10-year materials and workmanship warranty and a 25-year power output warranty. This listing is sold in sets of 2, 4, 6 or 10 panels.
Renogy Bifacial 590W Solar Panel Features
Bifacial Power Gain
With an 80% bifaciality factor, the rear side converts reflected light into extra power. Ground mounts over light gravel, sand, concrete or snow see the biggest gains.
N-Type Cells With 25% Efficiency
N-type cells produce more power per square foot, resist light-induced degradation and maintain output over decades.
Strong Hot-Weather Performance
A low temperature coefficient means the panel loses less output as it heats up, which matters most in sunny, hot regions.
16 Busbar Design
More busbars shorten current paths, improve conversion efficiency and reduce the effect of microcracks over time.
Utility-Grade Ratings
A 1,500VDC maximum system voltage and 30A series fuse rating allow long strings for high-voltage inverters and large arrays.
IP68 Protection
The sealed junction box keeps water and dust out for reliable operation in rain, snow and heat.
Real-World Applications
Home solar and backup. Pair with a hybrid inverter and batteries to cut energy bills and provide outage protection.
Off-grid homes and cabins. Build a high-output ground mount that keeps up with full-time living.
Farms and ranches. Power pumps, barns, shops and electric fencing.
Commercial and agricultural sites. Lower installed cost per watt with fewer, larger panels.
How It Compares to Common Alternatives
Versus monofacial panels. Standard panels only use light hitting the front. Bifacial panels add rear-side output, which can raise total energy production on elevated or ground mounts.
Versus smaller panels. 100W to 320W panels are easier to fit on RVs and small roofs. The 590W panel reduces the number of panels, connections and racking for large arrays.
Versus PERC panels. PERC panels cost a little less but lose more output in the heat and degrade faster than N-type panels.
Is This Panel the Right Fit
-
Size and weight. Each panel measures 89.7 x 44.6 inches and weighs 58.4 lbs. Plan for two-person handling and a rack rated for local wind and snow loads.
-
Mounting. To benefit from bifacial gain, mount the panel with space beneath it over a reflective surface. Flush roof mounts gain little from the rear side.
-
Electronics. With a 43.71V operating voltage and 52.63V open circuit voltage, use a high-voltage MPPT controller or inverter and keep string voltage within its limits.
-
Current. Each panel produces up to 14.13A short circuit current. Check controller and inverter input current ratings.
This may be a good fit if
- You are building a large ground-mounted array
- You want maximum energy per panel
- You live in a hot or snowy climate
- You use a high-voltage hybrid inverter or MPPT controller
Common Questions
What Are the Benefits of Bifacial Panels?
They capture sunlight on both sides, produce more energy than single-sided panels, perform better in overcast light and can be installed in many orientations.
How Many Panels Do I Need?
Calculate your daily energy use in watt-hours, divide by your local peak sun hours and add a margin for losses.
Why Is My Panel Underperforming?
Indirect sunlight, heat, clouds and dirt on the glass reduce output. Clean both surfaces and avoid shade.
What's Included
- 2, 4, 6 or 10 x Renogy Bifacial 590W N-Type Monocrystalline Solar Panels (based on option selected)
Maximum Energy From Every Panel
The Renogy Bifacial 590W N-Type Solar Panel delivers high front-side output plus rear-side gain for home, farm and off-grid ground mounts. At Outbound Power, we help customers design large arrays and choose compatible inverters, controllers and racking. If you have questions, our team is happy to help.
Renogy 590W Solar Panel Specifications
|
| Model |
RSP590DCT-144 |
| Cell Type |
N-type monocrystalline, bifacial, 16 busbars |
| Max Power at STC (Front) |
590W |
| Bifaciality Factor |
80% (up to 177W additional rear-side power) |
| Open Circuit Voltage (Voc) |
52.63V |
| Short Circuit Current (Isc) |
14.13A |
| Optimum Operating Voltage (Vmp) |
43.71V |
| Optimum Operating Current (Imp) |
13.50A |
| Maximum System Voltage |
1500VDC |
| Maximum Series Fuse Rating |
30A |
| Module Efficiency |
22.8% |
| Cell Efficiency |
25% |
| Junction Box |
IP68 |
| Operating Temperature |
-40°F to 185°F (-40°C to 85°C) |
| Dimensions |
89.7 x 44.6 x 1.4 in (2278 x 1134 x 35 mm) |
| Weight |
58.4 lbs (26.5 kg) |
| Certifications |
CE; ISO 9001 facility |
| Materials and Workmanship Warranty |
10 years |
| Power Output Warranty |
95% at 5 years, 90% at 10 years, 80% at 25 years |