The Rich Solar 50 Watt Solar Kit Gives a Small 12V Battery Bank Its Own Panel, PWM Controller and Wiring
The Rich Solar 50 Watt Solar Kit (RS-K502) pairs one MEGA 50 monocrystalline solar panel (RS-M50) with a BRAVO LEGEND 30 30A PWM charge controller (RS-PWM30P). Red and black solar cables, red and black battery cables, a set of four Z brackets and a 10A inline fuse holder with fuse come in the kit too. Rich Solar estimates the panel produces approximately 0.2kWh of energy per day under 4 peak sun hours.
Rich Solar designed the kit around a 12V charging system for RVs, trailers, boats, cabins, sheds and other small off-grid setups. It doesn't include a battery or inverter, so you'll connect it to your own compatible 12V battery bank.
Rich Solar 50 Watt Solar Kit Features
A Compact 50W Monocrystalline Panel
The MEGA 50 measures 22.8 x 20.5 x 1.2 inches (580 x 520 x 30 mm) and weighs 8.0 lb (3.6 kg). It's rated 50W with a 0 to +5W power tolerance, 17.6V and 2.84A at maximum power, and 20.8V open circuit. Its 30 monocrystalline cells reach up to 23.2% cell efficiency, with 16.6% module efficiency.
Tempered Glass, Aluminum Frame and IP67 Junction Box
A 3.2 mm AR-coated tempered glass front sits in an anodized aluminum frame, and the junction box is rated IP67. Rich Solar certifies the panel's mechanical strength to 5400 Pa positive and 2400 Pa negative load and lists a temperature range of -40°F to 185°F. Pre-drilled holes work with ground mounts, Z brackets, pole mounts and tilt mounts.
Three-Stage PWM Charging
The BRAVO LEGEND 30 charges in three stages: boost, float and equalization. Equalization helps prevent sulfation in lead-acid batteries and doesn't run for GEL or lithium batteries. Temperature compensation adjusts the charging voltage at -3.0 mV/°C/2V for every battery type except lithium.
12V and 24V Auto Detection With Four Battery Programs
The controller recognizes a 12V or 24V battery when you connect it, and you can also set the voltage by hand. Charging programs cover sealed (the default), GEL, flooded and lithium batteries. It's rated for 450W of solar at 12V and 900W at 24V, with a solar input below 55V.
A Load Output With Five Working Modes
A load terminal on the controller can switch a DC load in five ways: light control with a 10-minute delay you can change, light control plus a 1 to 14 hour timer, manual on and off, a debugging mode, and always on. An advanced start method helps loads with large capacitance start smoothly.
LCD Screen, USB Port and Optional Bluetooth
A dot-matrix LCD with two buttons steps through solar panel voltage and current, battery voltage, discharging current, charged and discharged amp-hours, controller temperature, load mode and error codes. The controller also has a USB port for charging devices and a communication port, and Bluetooth monitoring is optional.
Protection and UL 1741 Certification
Electronic protection covers overcharge, over-discharge, overload, short circuits and reverse polarity, and TVS lightning protection helps guard the controller against voltage surges. Rich Solar lists the BRAVO LEGEND 30 as UL 1741 certified.
Real-World Applications
RVs and trailers. Keep a 12V house battery charged while the rig sits between trips.
Boats. Use a small panel to top up a 12V battery at the dock or on a mooring.
Cabins and sheds. Run a small off-grid 12V system, and use the load output and light-control modes to switch a DC light at dusk.
Practical Comparison
50 Watt Kit Versus a Kit With an MPPT Controller
An MPPT controller converts surplus panel voltage into extra charging current. The BRAVO LEGEND 30 uses simpler PWM charging instead, and it adds a switched load output with light and timer modes, which suits small 12V systems that run a light or other DC load from the battery.
50 Watt Kit Versus Buying Parts Separately
Buying a panel, controller, cables and brackets one at a time means choosing cable lengths, wire gauge and fuse size yourself. This kit includes 20 foot 10 AWG solar cables, 10 foot 10 AWG battery cables, a set of four Z brackets and a 10A inline fuse holder with fuse, all chosen by Rich Solar for this panel and controller.
Buyer Guidance
Wiring Order and Fusing
The manual says to connect the battery first, then the solar panel, then any load, and to keep load current within the controller's rating. Rich Solar's wiring diagram puts the 10A inline fuse on the panel's positive lead and shows an optional 30A ANL fuse on the battery cable, which isn't included. The manual also recommends a fuse in series with the battery. The controller has a common positive inside, so if your system needs grounding, ground the positive side.
Placement and Adding Panels
The controller produces heat while it works, so the manual recommends mounting it somewhere with good ventilation. It's rated IP30. Rich Solar says you can add compatible Rich Solar panels as your needs grow. Stay within the controller's 450W rating at 12V and keep the solar input under 55V.
This May Be A Good Fit If
- You have a small 12V battery bank to keep charged
- You want a simple kit with one panel about 23 x 20 inches
- You'd like a load output that can switch a light at dusk
- You may add more Rich Solar panels later
Common Questions
Does the 50 Watt Kit Include a Battery?
No. Rich Solar's kit comes without batteries. Its wiring diagram shows a 12V lithium battery and a 12V power inverter, both marked not included.
How Much Energy Will the Panel Produce?
Rich Solar estimates approximately 0.2kWh of energy per day under 4 peak sun hours. Days with fewer peak sun hours will produce less.
Can I Use It With a Lithium Battery?
Yes. Choose the lithium (LI) program in the battery type menu. Temperature compensation doesn't apply to lithium, and the equalization stage doesn't run for it.
What Warranty Does the Panel Carry?
Rich Solar backs the MEGA 50 panel with a 25-year power output warranty and a 10-year limited workmanship warranty.
What's Included
- 1 x 50 Watt Monocrystalline Solar Panel (RS-M50)
- 1 x 30A PWM Solar Charge Controller (RS-PWM30P)
- 1 x 20 Foot 10 AWG Solar Cable (Red), Panel to Controller
- 1 x 20 Foot 10 AWG Solar Cable (Black), Panel to Controller
- 1 x 10 Foot 10 AWG Battery Cable (Red), Controller to Battery
- 1 x 10 Foot 10 AWG Battery Cable (Black), Controller to Battery
- 1 x Mounting Z Brackets, Set of 4
- 1 x 10A Inline Fuse Holder With Fuse
Simple Solar Charging for Small 12V Systems
The Rich Solar 50 Watt Solar Kit gives you a MEGA 50 panel, a BRAVO LEGEND 30 PWM controller with a load output, and the cables, brackets and fuse holder to connect them to a 12V battery. If you'd like help choosing a battery or planning a larger array later, the Outbound Power team is happy to help.
Rich Solar 50 Watt 12V Solar Kit With MEGA 50 Panel and BRAVO LEGEND 30 PWM Controller Specifications
|
| Model |
RS-K502 |
| Kit |
| Total Solar Power |
50W |
| Panel |
1 x MEGA 50 50W (RS-M50) |
| Charge Controller |
BRAVO LEGEND 30 30A PWM (RS-PWM30P) |
| Battery System Voltage |
12V |
| Estimated Daily Energy |
About 0.2kWh per day under 4 peak sun hours |
| Battery |
Not included |
| Inverter |
Not included |
| Solar Circuit Fuse |
10A inline fuse holder with fuse (included) |
| Battery Circuit Fuse |
30A ANL fuse, optional, not included (Rich Solar wiring diagram) |
| Kit Contents |
| 50 Watt Monocrystalline Solar Panel (RS-M50) |
1 |
| 30A PWM Solar Charge Controller (RS-PWM30P) |
1 |
| 20 Foot 10 AWG Solar Cable (Red), Panel to Controller |
1 |
| 20 Foot 10 AWG Solar Cable (Black), Panel to Controller |
1 |
| 10 Foot 10 AWG Battery Cable (Red), Controller to Battery |
1 |
| 10 Foot 10 AWG Battery Cable (Black), Controller to Battery |
1 |
| Mounting Z Brackets, Set of 4 |
1 |
| 10A Inline Fuse Holder With Fuse |
1 |
| Solar Panel |
| Panel Model |
MEGA 50 (RS-M50) |
| Rated Power |
50W |
| Power Tolerance |
0 to +5W |
| Maximum Power Voltage (Vmp) |
17.6V |
| Maximum Power Current (Imp) |
2.84A |
| Open Circuit Voltage (Voc) |
20.8V |
| Short Circuit Current (Isc) |
3.13A |
| Maximum System Voltage |
1000VDC |
| Maximum Series Fuse Rating |
10A |
| Module Efficiency |
16.6% |
| Maximum Cell Efficiency |
23.2% |
| Cell Type |
Monocrystalline |
| Cell Size |
7.2 x 1.8 in (182 x 45.5 mm) |
| Cell Layout |
30 cells (3 x 10) |
| Dimensions |
22.8 x 20.5 x 1.2 in (580 x 520 x 30 mm) |
| Weight |
8.0 lb (3.6 kg) |
| Glass |
3.2 mm (0.13 in) AR-coated tempered glass |
| Backsheet |
White |
| Frame |
Anodized aluminum alloy |
| Junction Box |
IP67 |
| Connector |
Solar connectors |
| Panel Cables |
4.0 mm2 (#12 gauge), 23.6 in (600 mm) |
| Mounting Holes |
Pre-drilled; ground mounts, Z brackets, pole mounts, tilt mounts |
| Temperature Range |
-40°F to +185°F |
| Nominal Module Operating Temperature |
45°C +/- 2°C |
| Temperature Coefficient of Pmax |
-0.35%/°C |
| Temperature Coefficient of Voc |
-0.28%/°C |
| Temperature Coefficient of Isc |
0.045%/°C |
| Mechanical Load |
5400 Pa positive, 2400 Pa negative |
| Charge Controller |
| Controller Model |
BRAVO LEGEND 30 (RS-PWM30P) |
| Controller Type |
PWM, 3-stage (boost, float, equalization) |
| Rated Current |
30A |
| System Voltage |
12V/24V auto recognition (manual setup optional) |
| Rated Solar Power |
450W at 12V, 900W at 24V |
| Max Solar Input Voltage |
Below 55V |
| Max Battery Voltage |
Below 34V |
| No-Load Loss |
Below 13mA at 12V, below 15mA at 24V |
| Battery Types |
Sealed (default), GEL, Flooded, Lithium |
| Equalization |
Flooded and sealed lead-acid only; every 30 days, 1 hour |
| Temperature Compensation |
-3.0 mV/°C/2V (not for lithium) |
| Over-Discharge Voltage |
11.0V (settable) |
| Over-Discharge Recovery Voltage |
12.5V (settable) |
| Overvoltage Protection |
16.0V |
| Load Working Modes |
5 types: light control, light control + 1-14 h timer, manual, debugging, normal on |
| Light Control Delay |
10 minutes (settable) |
| Display |
Dot-matrix LCD, 2 buttons |
| USB Port |
Yes |
| Communication Port |
Yes |
| Bluetooth |
Optional |
| Protections |
Overcharge, over-discharge, overload, short circuit, reverse polarity, over-temperature, TVS lightning protection |
| Grounding |
Positive ground (common positive) |
| IP Rating |
IP30 |
| Operating Temperature |
-13°F to +131°F (-25°C to +55°C) |
| Dimensions |
6.46 x 4.07 x 1.85 in (164 x 103 x 47 mm) |
| Net Weight |
0.86 lb (0.39 kg) |
| Certifications |
UL 1741 (Rich Solar page); ETL, CE, FCC, RoHS (spec sheet) |
| Warranty |
| Solar Panel Power Output |
25 years |
| Solar Panel Workmanship |
10 years, limited |
Rich Solar 50 Watt 12V Solar Kit With MEGA 50 Panel and BRAVO LEGEND 30 PWM Controller Manuals and Documents
Rich Solar BRAVO LEGEND 30 PWM Charge Controller Manual
Rich Solar MEGA 50 Solar Panel Specification Sheet
Rich Solar BRAVO LEGEND 30 PWM Charge Controller Specification Sheet