The Rich Solar RS-G05 Cable Entry Plate Carries Up to 37.7A Continuous on 8 AWG Wire for Higher-Current Roof Arrays
The Rich Solar RS-G05 Cable Entry Plate is a compact roof entry pre-wired with red and black UL 1015 8 AWG tin-plated copper wire and pre-installed IP68 MC4 solar connectors. It's rated 37.7A continuous, 50A maximum and 600V.
Rich Solar lists it for solar panels on RVs, boats and cabins. The flame-retardant polypropylene housing measures 5.9 x 4.3 x 1.6 inches, weighs 0.34 lb and operates from -40°F to 185°F.
Rich Solar RS-G05 Cable Entry Plate Features
8 AWG Wiring for More Current
The pre-installed 8 AWG tin-plated copper wire handles 37.7A continuous and up to 50A, with 600V as the wire's voltage rating. Red and black insulation marks polarity clearly.
IP68 MC4 Connectors, Ready to Plug In
The tool-free MC4 connectors come pre-installed in the housing. They're rated IP68, flame-retardant to UL94 V-0 and UL Listed.
Flame-Retardant Housing and Heat-Rated Wire
The polypropylene housing is flame retardant, and the VW-1 flame-rated PVC wire insulation is rated from 5°F to 221°F (-15°C to 105°C).
Real-World Applications
RV roofs. Bring a higher-current array into the coach through one compact entry.
Boats. Route solar panel wiring inside through one compact entry, with IP68 connectors on the outside.
Cabins. Route roof panel wiring indoors on an off-grid system.
Practical Comparison
8 AWG Entry Plate Versus a 10 AWG Entry Plate
A 10 AWG entry plate uses lighter wire. The RS-G05's 8 AWG wire is rated 37.7A continuous and 50A maximum, so it's the choice when your array's current is more than a 10 AWG entry is rated to carry.
Buyer Guidance
Sizing and Mounting
Check that your array's continuous current stays at or under 37.7A and its voltage at or under 600V. Seal and secure the plate with adhesive or sealant and screws; mounting hardware isn't included. Plan to join the 8 AWG leads to wiring sized for your controller run.
This May Be A Good Fit If
- Your roof array runs up to 37.7A continuous
- You want 8 AWG wire through the roof
- You're mounting solar on an RV, boat or cabin
- You want IP68 MC4 connectors at the entry
Common Questions
What Current Is the RS-G05 Rated For?
37.7A continuous and 50A maximum, on 8 AWG tin-plated copper wire rated for 600V.
Is Mounting Hardware Included?
No. Plan on adhesive or sealant plus screws, which you supply.
How Big Is It?
It measures 5.9 x 4.3 x 1.6 inches (150 x 110 x 40 mm) and weighs 0.34 lb.
What's Included
- 1 x RS-G05 Cable Entry Plate With Pre-Installed Solar Connectors and 8 AWG Wires
Heavier Wire Through the Roof
The Rich Solar RS-G05 Cable Entry Plate pairs 8 AWG wire rated 37.7A continuous with IP68 MC4 connectors in a compact, flame-retardant housing. If you're not sure whether your array needs 8 AWG at the roof entry, the Outbound Power team is happy to help.
Rich Solar Cable Entry Plate With 8 AWG Wires and IP68 Solar Connectors RS-G05 Specifications
|
| Model |
RS-G05 |
| General |
| Material |
Flame-retardant polypropylene (PP) |
| Color |
Black |
| Dimensions (L x W x H) |
5.9 x 4.3 x 1.6 in (150 x 110 x 40 mm) |
| Weight |
0.34 lb (153 g) |
| Operating Temperature |
-40°F to 185°F (-40°C to 85°C) |
| Mounting |
Adhesive/sealant and screws (hardware not included) |
| Package Dimensions |
7 x 5 x 2 in |
| Gross Weight |
1 lb |
| Electrical |
| Maximum Current |
50A |
| Continuous Current |
37.7A |
| Maximum Voltage |
600V (wire rating) |
| Wire |
UL 1015, 8AWG (red/black) |
| Conductor Material |
Tin-plated copper |
| Wire Insulation |
PVC (VW-1 flame rated) |
| Wire Temperature Rating |
5°F to 221°F (-15°C to 105°C) |
| Solar Connectors |
| Type |
MC4 (model LQ-2), pre-installed |
| Material |
PC shell |
| Protection Rating |
IP68 |
| Flame Class |
UL94 V-0 |
| Certification |
UL Listed |
Rich Solar RS-G05 Cable Entry Plate Specification Sheet