The Victron Energy Isolation Transformer 2000 Watt 115 / 230V Helps Protect Your Vessel From Galvanic Corrosion While Keeping Shore Power Properly Isolated
The Victron Energy Isolation Transformer 2000 Watt 115 / 230V is a shore power isolation transformer built for boats and other vessels that plug in at the dock. It removes the electrical connection between the marina's AC supply and your vessel, which helps prevent galvanic corrosion and supports a safer onboard electrical system. If you own a boat, manage a marine electrical install, or are upgrading a shore power setup, this Victron isolation transformer is a practical piece of protection for your boat and its metal parts below the waterline.
It also works as a voltage converter. It can take 115V or 230V in and deliver 120V or 240V out, and it is designed for 50Hz or 60Hz systems. Add soft start circuitry and low-noise toroidal construction, and you get a compact, serious piece of equipment that earns its spot next to your breaker panel.
Victron Energy Isolation Transformer 2000 Watt 115 / 230V Features
Electrical Isolation From Shore Power So You Can Connect With More Confidence
Shore power and your vessel are two different electrical worlds. This transformer feeds shore power into its primary side and powers your vessel from the secondary side, so there is no electrical continuity between the two. Because your vessel's metal parts connect to the neutral output on the secondary side, a GFCI or breaker can still trip if a short circuit reaches a metal part onboard.
Galvanic Corrosion Prevention So Your Anodes, Shaft, And Propeller Last Longer
Galvanic corrosion can occur on any vessel once a metal part, such as a shaft or propeller, touches water. When a vessel is connected to shore supply ground, it can quickly dissolve sacrificial anodes and attack metal parts in the water. Isolating the vessel from the shore ground blocks the corrosion that originates from the shore connection. Skipping the ground wire is not a safe workaround, because a GFCI will not work and a breaker will not trip in a short to a metal part.
Flexible Voltage Conversion For Marinas With Different Power Standards
The transformer uses a 1:1.05 ratio, which raises output voltage by 5% to help offset the voltage drops that are common at marinas. Using the included jumper wires, you can configure it for these conversions:
- 115V input to 120V output
- 230V input to 240V output
- 115V input to 240V output
- 230V input to 120V output
It works on 50Hz or 60Hz systems but cannot convert one frequency to the other. Always verify the input and output configuration before powering it on.
Soft Start Circuitry So Your Shore Breaker Stays Put
Transformers draw a burst of inrush current when they switch on, and that burst can trip an upstream breaker. The built-in soft start and inrush current limiter are designed to prevent your shore power circuit breaker from tripping when you plug in. Nobody wants to walk down a dock at dusk to reset a breaker.
Toroidal Design For Quiet, Efficient Operation
Victron uses toroidal wound technology, which is described as low noise and low weight. The unit is fan cooled with temperature-controlled fan speed, and it shuts off if it overheats. The aluminum enclosure weighs about 28 lbs (12.7 kg) and measures roughly 14.8 x 8.4 x 5.3 inches (375 x 214 x 135 mm), so it fits into a typical vessel installation without taking over the whole lazarette.
Out-Of-Water Earth Linking For Winter Storage And Maintenance
When a vessel is on land for winter storage or maintenance, the manual recommends connecting its earth directly to the shore earth. This transformer has a built-in facility for that, and the jumper wire for the job is included.
Real-World Applications
-
Boats and yachts at the marina. This is the core use. Isolating shore power helps protect against galvanic corrosion while keeping GFCI protection working on the vessel side.
-
Vessels visiting marinas with different voltage standards. Converting 230V shore power to 120V, or 115V to 240V, lets onboard equipment run on the voltage it expects.
-
Winter storage and yard work. Linking input and output earth keeps the vessel properly grounded when it is out of the water.
-
Professional marine electrical systems. Victron describes isolation transformers as indispensable in professional marine energy systems, and this unit fits that role for installers.
This product is designed around marine shore power. If you are considering it for an RV, mobile worksite, or other non-marine use, confirm that it fits your system with a qualified installer before purchase.
How It Compares To Galvanic Isolators And Going Without Isolation
A galvanic isolator blocks small corrosion-causing DC voltages on the ground wire. An isolation transformer takes a more complete approach by eliminating the electrical continuity between shore power and the vessel entirely. According to Victron, the transformer also eliminates the need for galvanic isolators and polarity alarms.
The alternative of connecting only the live and neutral wires and leaving the ground off might look simple, but it is unsafe, because GFCIs and breakers may not trip in a short circuit to the vessel's metal parts. The tradeoff with a transformer is size, weight, and a proper installation. For many boat owners, that is a fair price for a cleaner, safer-by-design electrical system.
Is This Isolation Transformer Right For Your Vessel
Think about your shore power loads first. This 2000 watt model is rated for 19A at 115V or 8.5A at 230V. Victron also makes a 3600 watt version for larger demands, so confirm your expected loads before you buy.
This may be a good fit if:
- You connect your boat to marina shore power and want to prevent galvanic corrosion.
- You want isolation without relying on galvanic isolators alone.
- You need to convert between 115V and 230V shore supplies.
- You are upgrading or building a professional marine AC system.
Keep these installation points in mind:
- A GFCI must be installed on the transformer's AC output, with the output neutral linked to earth.
- Minimum cable sizes are 2.5 mm² (AWG 13) at 115V and 1.5 mm² (AWG 16) at 230V.
- Leave at least 10 cm (4 in) of free space around the unit for ventilation.
- The enclosure is rated IP21, so keep it away from water, spray, snow, and dust.
- Wiring and safety components must follow local regulations, and installation by a qualified professional is recommended.
Common Questions
Can this transformer convert 230V shore power to 120V?
Yes. It can be configured for 115V to 120V, 230V to 240V, 115V to 240V, or 230V to 120V. It does not convert 50Hz to 60Hz or the reverse.
Do I still need a GFCI?
Yes. The manual states that a GFCI must be installed on the AC output, and the AC output neutral must be linked to earth for the GFCI to work correctly. A jumper wire for this link is included.
Will it trip my shore power breaker when I plug in?
It is designed not to. The soft start feature limits inrush current to help keep upstream breakers from tripping.
Can I use it when my boat is out of the water?
Yes. The transformer has a facility to link input earth to output earth for winter storage or maintenance, using the included jumper wire.
What's Included
- 1 x Victron Energy Isolation Transformer 2000 Watt 115 / 230V
- 1 x Hanging Bracket
- 4 x Mounting Screws
- 4 x Short Black Jumper Wires With 6.35 mm Female Spade Connectors
- 1 x Short Yellow/Green Jumper Wire With 6.35 mm Female Spade Connectors
- 1 x Long Yellow/Green Jumper Wire With 6.35 mm Female Spade Connectors
Build A Shore Power System You Can Count On
Good boat electrical systems are quiet in the best way, because nothing corrodes, nothing trips, and nobody gets an unpleasant surprise. The Victron Energy Isolation Transformer 2000 Watt 115 / 230V is a long-term investment in that kind of boring reliability. At Outbound Power, we help customers match the right components to the way they actually use power, so you can build a shore power setup that protects your vessel for the seasons ahead.
Victron Energy Isolation Transformer 2000 Watt Manuals