EARLY BLACK FRIDAY SALE IS LIVE  |  SHOP NOW WITH OUR PRICE DROP GUARANTEE →
EARLY BLACK FRIDAY SALE IS LIVE  |  SHOP NOW →
Skip to content

Victron Energy Isolation Transformer 3600W Auto 115 / 230V

|
SKU: ITR050362041
$631.55

Early Black Friday Price Drop Guarantee

  • Buy now, and if our price drops by Black Friday, we'll refund the difference.
  • Found it lower elsewhere? We'll beat it.

We Beat Any Price

Found the same price or less? Just ask & we'll beat it.

The Victron Energy Isolation Transformer 3600W Auto 115 / 230V Helps Keep Your Boat Safe From Shore Power Hazards

The Victron Energy Isolation Transformer 3600W Auto 115 / 230V is a marine isolation transformer built to electrically separate your vessel from AC shore power. If you plug into marina power regularly, this unit gives you a protected AC system on board. It is designed to prevent galvanic corrosion and support a safer electrical setup, and Victron states that it eliminates the need for galvanic isolators and polarity alarms. It automatically detects 115V or 230V shore power and delivers a 120V or 240V output (configured during installation) with up to 3600W of capacity. That makes it a practical fit for boat owners who travel between marinas with different shore power standards.


Victron Energy Isolation Transformer 3600W Auto 115 / 230V Features

Full Galvanic Isolation For Corrosion Protection Below The Waterline

Connecting a shore ground wire to a vessel's metal parts can cause galvanic corrosion, which attacks sacrificial anodes, shafts, propellers, and other submerged metal. Skipping the ground connection is not a safe workaround. This transformer feeds shore power to its primary side and your vessel to the secondary, so there is no electrical continuity between the two. Your onboard system stays isolated from the shore ground.

Safer Onboard Protection So A GFCI Or Breaker Can Do Its Job

With the output neutral linked to earth, a GFCI or circuit breaker on your AC output can trip in the event of a short circuit to a metal part on the vessel. Victron requires a GFCI on the AC output of this transformer, and the included jumper wire is used to make the neutral-to-earth link.

Automatic Input Voltage Detection For Easy Marina Hopping

The transformer detects incoming voltage on its own, so you do not have to flip a switch when the shore pedestal changes.

  • 88V to 130V puts it in 115V input mode
  • 185V to 250V puts it in 230V input mode
  • Voltages outside those windows switch the input and output off

Output voltage is set during installation with jumper connections. It can be configured for 120V or 240V, and it can convert 230V to 120V or 115V to 240V. It works on 50Hz or 60Hz systems but cannot convert one frequency to the other.

A 1:1.05 Transformer Ratio For Marina Voltage Drops

The 1:1.05 ratio boosts output voltage by 5%. Victron notes this helps compensate for the voltage drops that are common in marinas.

Soft Start Circuitry So You Do Not Trip The Dock Breaker

Transformers can draw a large inrush current when switched on. The built-in inrush current limiter prevents upstream circuit breakers from tripping, so you are less likely to knock out power at the pedestal.

Toroidal Construction And Fan Cooling For Quiet, Efficient Operation

The toroidal design is low noise and low weight. A temperature-controlled fan speeds up as heat builds, and overtemperature protection switches the unit off if it overheats. Front-panel LEDs show when the unit is operational, which input mode is active, and when the fan is running.

An Earth Link Option For Boats Out Of The Water

Victron recommends linking shore earth to vessel earth when a boat is on land for winter storage or maintenance. This transformer has a built-in facility for that, using an included jumper wire.


Real-World Applications

This transformer is built around vessel use, and that is where it shines.

  • Marina shore power. Keep your boat's AC system isolated from the dock while running onboard outlets, chargers, and appliances.
  • Cruising between regions. Automatic 115V or 230V input detection and 120V or 240V output options help when shore power standards vary.
  • Metal and aluminum hull boats. Victron notes galvanic corrosion can occur on any vessel where metal parts touch the water, not just metal hulls.
  • Winter storage and yard work. The earth-link provision supports safer connections while the vessel is out of the water.

It is not intended for RV, home backup, or off-grid use cases, and it does not generate power. It conditions and isolates power you already have.


How This Isolation Transformer Compares To Common Alternatives

Galvanic isolators and polarity alarms are a common approach to shore power protection. According to Victron, a properly installed isolation transformer removes the need for both, because it eliminates electrical continuity between shore and vessel.

Some boaters are tempted to leave the shore ground disconnected to avoid corrosion. Victron describes that as extremely dangerous, since a GFCI will not work and a breaker will not trip on a short to a metal part.

A transformer is also not a frequency converter. If you need to change 50Hz to 60Hz or the reverse, this unit will not do that. It is also a heavier piece of equipment than a small plug-in adapter, so plan for the weight and mounting location.


Is This Isolation Transformer Right For Your Vessel

This unit suits boat owners who want proper shore power isolation with a 3600W rating. Check your loads first. The output current rating is 32A at 115V and 16A at 230V, and Victron states the demanded power must not exceed the product's rating.

This may be a good fit if you:

  • Connect your vessel to marina shore power
  • Want to prevent galvanic corrosion from the shore connection
  • Need automatic 115V or 230V input detection
  • Have space to mount a 23 kg unit measuring 362 x 258 x 218 mm (h x w x d)

Installation matters here. The manual specifies minimum cable cross-sections (6 mm² or AWG 10 at 115V, and 2.5 mm² or AWG 13 at 230V), cable glands, breakers, a GFCI, and 10 cm of free space around the unit for ventilation. Install it in a well-ventilated, dry location, since it is rated IP21 and should not be exposed to water, mist, snow, spray, or dust. Have a qualified installer confirm that wiring and protection meet local regulations.


Common Questions

Does It Automatically Switch Between 115V And 230V Input?

Yes. It detects incoming voltage and selects 115V or 230V input mode. Output voltage (120V or 240V) is configured during installation with jumper connections.

Can It Convert 50Hz Power To 60Hz?

No. It works on 50Hz or 60Hz systems, but it cannot convert one frequency to the other.

Do I Still Need A GFCI?

Yes. Victron states a GFCI must be installed on the AC output, with the output neutral linked to earth and the vessel's metal parts.

What Is The Operating Temperature Range?

The specified range is -20°C to 40°C, with humidity up to 95% non-condensing.


What's Included

  • 1 x Victron Energy Isolation Transformer 3600W Auto 115 / 230V
  • 1 x Hanging Bracket For Mounting Inside A Vessel
  • 1 x Long Yellow/Green Jumper Wire With Female 6.35 mm Spade Connectors
  • 1 x Long Yellow/Green Wire With Eye Terminals For Case Grounding
  • 1 x Short Yellow/Green Jumper Wire With Female 6.35 mm Spade Connectors
  • 7 x Mounting Screws


Build A Safer Shore Power Setup With Outbound Power

Good electrical protection is something you only notice when it is missing. The Victron Energy Isolation Transformer 3600W Auto 115 / 230V gives your vessel a dependable barrier between shore power and your onboard system, with soft start, automatic input detection, and built-in protections. At Outbound Power, we help customers match the right equipment to the way they actually use power. If you want help planning your setup, we are happy to be your knowledgeable partner from first question to final install.

 

Victron Energy Isolation Transformer 3600W Auto 115 / 230V Manuals

Victron_Energy_Isolation_Transformer_3600W_Auto_Manuals

Common Customer Questions

Get answers to the most frequently-asked questions customers ask before placing an order.

Is Outbound Power an Authorized Dealer?

Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.

How long will it take for my order to arrive?

Shipping times vary depending on your location and the product or products ordered.

Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.

After order processing is complete, you will receive tracking information to monitor your order while it is in transit.

Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.

Please refer to the product page for your item and reference the estimated delivery time frame for more details.

Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.

What are your shipping rates? Do you offer free shipping?

Everything on our store ships for free. Really!

What is Outbound Power's return policy?

Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.

Are Outbound Power products used/old/refurbished?

Everything sold on our website is brand-new.

Do you price match?

No — we price BEAT! Please refer to our Price Beat Promise for full details.