The Victron RJ12 UTP Cable 1.8 m Replaces A Short BMV Cable When You Want The Display Farther From The Shunt
The Victron RJ12 UTP Cable 1.8 m is a six-foot cable that connects the shunt of a Victron BMV battery monitor to its head unit. It is for owners and installers who want the display in a different spot from the shunt, such as on a panel above a battery compartment.
Victron says an RJ12 cable ships standard with a BMV battery monitor. If that cable is too short for your layout, or too long and messy, this length is one of the replacements Victron offers, in lengths from 0.3 m up to 30Â m.
Victron RJ12 UTP Cable 1.8 m Features
Six Feet Between Shunt And Display
The 1.8 m length gives you about six feet of reach, which is useful when the battery bank is in a locker and the display is on a panel a few feet away.
Made For BMV Battery Monitors
Victron describes this cable as the link between the BMV shunt and the BMV head unit. It is not a general-purpose cable for other Victron devices.
Replacement For The Supplied Cable
Because a cable already ships with the BMV, this one is mainly for when the original is the wrong length, damaged or lost.
Lists Matching BMVÂ Models
Victron's page lists the BMV-700, BMV-700H and BMV-710H Smart, BMV-702, BMV-702 Black and BMV-712 Smart as related products.
Standard Victron Warranty
The product page refers to Victron's standard warranty, shown as 5Â years.
Real-World Applications
A six-foot BMV cable suits a range of installs.
-
RV battery compartments. Mount the BMV display inside the coach while the shunt stays at the batteries.
-
Boat battery lockers. Reach from the shunt near the batteries to a switch panel or nav station.
-
Van and camper builds. Place the display in a cabinet at eye level with the shunt under a seat.
-
Solar cabins and sheds. Connect a head unit on a wall near the door to a shunt on the battery shelf.
-
Replacement and repair. Swap a cable that has been cut, pinched or pulled out of its connector.
Choosing The Right RJ12Â Length
Victron offers its RJ12 UTP cable in lengths from 0.3 m up to 30 m. A short 0.3 m or 0.9 m cable is enough when the shunt and display are almost touching. The 1.8 m cable gives you room to route around a bracket or through a cabinet. If the display is across a vehicle or boat, step up to 5 m. Because Victron ships a cable with every BMV, think of this one as a swap for the supplied cable, not something every BMV owner needs.
Is This RJ12 Cable The Right Fit For Your BMV
Check what you have before you buy a replacement.
- Confirm that you have a BMV battery monitor with a separate shunt and head unit.
- Measure the route from the shunt to the display, including bends.
- Check that the connector type on your parts is RJ12. Victron's page does not list other uses for this cable.
This May Be A Good Fit If
- Your BMV came with a cable that is too short for your layout
- You are moving the display to a new location
- You need to replace a damaged shunt-to-display cable
- You want a six-foot run without a large coil of extra cable
Common Questions
What Does The Victron RJ12 UTP Cable 1.8 m Connect?
Victron says it connects the BMV shunt to the BMV head unit.
Does A BMV Already Come With AÂ Cable?
Yes. Victron says an RJ12 cable ships standard with a BMV battery monitor. This cable replaces it when it is too long or too short.
How Long Is It In Feet?
It is 1.8 meters, which is about 5.9 feet or 70.9Â inches.
Can I Use It For A SmartShunt Or Other Victron Device?
Victron's page names the BMV shunt-to-head-unit connection. It does not list other devices, so please confirm with our team before using it elsewhere.
What's Included
- 1 x Victron RJ12 UTP Cable 1.8Â m
Put Your Battery Monitor Where You Can See It
A cable of the right length makes a battery monitor easier to install and easier to read. If you need help choosing a length for your BMV, the Outbound Power team is happy to help.
Victron RJ12 UTP Cable 1.8 m Specifications
|
| Product |
| Model |
ASS030066018 |
| Product Type |
RJ12 UTP Cable |
| Brand |
Victron Energy |
| Cable |
| Length |
1.8 m (5.9 ft (70.9 in)) |
| Connects |
BMV shunt to BMV head unit |
| Compliance and Warranty |
| Declaration of Conformity |
EC REACH Regulation (EC 1907/2006); RoHS (2011/65/EU and 2015/863/EU) |
| Warranty |
Victron standard warranty (5 years, per Victron product page) |
Victron RJ12 UTP Cable 1.8 m Declaration of Conformity