The Victron RJ12 UTP Cable 5 m Lets You Place A BMV Display Across A Van, Boat Or Equipment Room
The Victron RJ12 UTP Cable 5 m is a sixteen-foot cable for Victron BMV battery monitors. It connects the BMV shunt to the BMV head unit, so you can put the shunt next to the battery bank and the display where you will actually see it.
Victron says one RJ12 cable ships standard with a BMV. If that cable cannot reach your preferred display location, the 5 m length is a replacement for longer routes. Victron's range covers 0.3 m up to 30 m.
Victron RJ12 UTP Cable 5 m Features
Sixteen Feet Of Reach
With 5 m, the display can be in the cabin while the shunt stays by the batteries in a different compartment.
Shunt-To-Head-Unit Connection For BMV Monitors
The cable is described by Victron as the link between the BMV shunt and the BMV head unit.
Replaces The Supplied Cable
A cable ships with the BMV. This one is for when you need more length than the original.
Matches Victron's BMV Family
Victron lists the BMV-700, BMV-700H and BMV-710H Smart, BMV-702, BMV-702 Black and BMV-712 Smart as related products.
Standard Victron Warranty
The product page shows Victron's standard warranty as 5 years.
Real-World Applications
Five meters is for BMV layouts where the shunt and display are in different areas.
-
Camper vans. Put the shunt under the bed platform and the display by the sliding door.
-
Boats. Run from a battery locker to a helm or electrical panel.
-
Motorhome basements. Connect a shunt in a lower bay to a display inside the living area.
-
Garage solar systems. Mount the head unit near the electrical panel with the shunt at the batteries.
-
Retrofit installs. Add a display to an existing bank without moving the battery cables.
How 5 m Compares To Shorter RJ12 Cables
A 1.8 m RJ12 cable is long enough for many same-compartment installs. The 5 m cable is the next step up when the shunt is in one space and the display is in another. Victron also lists 10 m, 15 m and 30 m versions for much longer runs. Since a cable is supplied with every BMV, use this one when the included cable is not the right length. Measure your route first, and choose the shortest length that comfortably reaches.
Is The 5 m RJ12 Cable The Right Fit
A longer cable gives flexibility, but it also needs a clean route.
- Trace the route from shunt to display, including vertical runs.
- Plan where the cable will be clipped so it is supported.
- Confirm that you have a Victron BMV with an RJ12 shunt-to-display connection.
This May Be A Good Fit If
- The BMV display is far from the shunt
- The cable that came with your BMV is too short
- You are replacing a damaged cable on a long run
- You want to mount the display in a living area
Common Questions
What Is The Victron RJ12 UTP Cable 5 m Used For?
Victron says it connects the BMV shunt to the BMV head unit.
How Long Is This Cable?
It is 5 meters, which is about 16.4 feet.
Is A Cable Included With A BMV?
Yes. Victron says an RJ12 cable ships standard with a BMV battery monitor.
Does Victron Publish A Maximum Cable Length?
Victron lists RJ12 cables from 0.3 m up to 30 m. The product page does not state any other limits.
What's Included
- 1 x Victron RJ12 UTP Cable 5 m
Put Your Battery Monitor Where You Can See It
Putting the display where you can see it makes a battery monitor much more useful. The Outbound Power team can help you pick the right cable length for your BMV.
Victron RJ12 UTP Cable 5 m Specifications
|
| Product |
| Model |
ASS030066050 |
| Product Type |
RJ12 UTP Cable |
| Brand |
Victron Energy |
| Cable |
| Length |
5 m (16.4 ft) |
| Connects |
BMV shunt to BMV head unit |
| Compliance and Warranty |
| Declaration of Conformity |
EC REACH Regulation (EC 1907/2006); RoHS (2011/65/EU and 2015/863/EU) |
| Warranty |
Victron standard warranty (5 years, per Victron product page) |
Victron RJ12 UTP Cable 5 m Declaration of Conformity