The Victron VE.Direct Cable 0.9 m Gives Neighboring Devices a Short, Tidy Data Link
The Victron VE.Direct Cable 0.9 m is one of the shortest straight VE.Direct cables Victron offers. It links a device with a VE.Direct port, such as a SmartSolar charge controller or a BMV battery monitor, to a GX device or another VE.Direct input. At under three feet, it suits equipment that sits close together.
If you are building a compact system on one backboard or in one cabinet, this length keeps the wiring neat. You plug in, tuck away the slack, and move on to the next task.
Victron VE.Direct Cable 0.9 m Features
Short Length For Side-By-Side Equipment
At 0.9 m (about 2.95 ft), this cable reaches from one device to its neighbor with only a small loop to spare. That helps when your charge controller, battery monitor, and GX device share a single panel. There is very little extra cable to coil or hide.
Straight Connectors For Open Mounting
Victron makes VE.Direct cables in a straight model and a 90 degree angle model. This is the straight model, which suits ports that face open space and have room for the cable to run directly away.
VE.Direct Connection For Victron Monitoring And Solar Gear
Victron's Cerbo GX manual lists BMV battery monitors, MPPT solar chargers, Orion XS chargers, and Smart IP43 chargers as devices with a VE.Direct port that can connect directly to a GX device. Victron's cable page also lists VE.Direct inverters and the Peak Power Pack among compatible products.
Direct GX Device Connection Without Extra Adapters
Victron's manual says VE.Direct devices can be connected directly to a GX device through a VE.Direct port. A Cerbo GX has three VE.Direct ports. If you run out of ports, Victron suggests a VE.Direct to USB interface.
Real-World Applications
-
Single-panel installs. Mount a SmartSolar controller and a Cerbo GX on the same board and link them with a short run.
-
Compact RV or van electrical bays. Keep communication wiring tight in the small cabinet where your power gear lives.
-
Battery monitor to GX device. Connect a BMV or SmartShunt that sits right beside your GX device.
-
Bench testing. Set up and check VE.Direct devices on a workbench before you install them.
Choosing The Right Length
Victron offers this straight cable in several lengths, from 0.3 m up to 10 m. A shorter cable is easier to hide, but it must reach with the devices where you actually mount them. Measure the path the cable will follow, not the straight line between the two devices, because the route usually bends around corners and along edges.
Choose 0.9 m when the two devices are within arm's reach of each other. If your devices are farther apart, or you want slack for future changes, step up to a longer straight length.
Is This Cable The Right Fit
Before you order, confirm that your device has a VE.Direct port. Victron says the Inverter RS, Inverter RS Solar, and Multi RS cannot connect to a GX system by VE.Direct, because they connect by VE.Can. The MPPT RS can use either. Then confirm that the devices really are close enough for this length.
This May Be A Good Fit If
- Your VE.Direct device and your GX device are mounted next to each other
- You want a short, tidy cable run
- You prefer a straight connector for open, easy-to-reach ports
Common Questions
What Does The Victron VE.Direct Cable 0.9 m Connect?
It connects a device with a VE.Direct port to a GX device or another VE.Direct input. Typical devices include MPPT solar chargers and BMV battery monitors. Please confirm your exact model before you order.
Is 0.9 m long enough for my system?
It is long enough when the two devices sit close together on one panel or in one cabinet. Measure the cable path before you order. If you are unsure, choose a longer length rather than stretching the cable.
Can I extend this cable?
Victron states that VE.Direct cables have a maximum length of 10 m and cannot be extended. If you need more reach, choose a longer cable from the same family.
How Long Is This Cable?
Victron lists it as 0.9 m, which is about 2.95 feet. Victron does not publish a cable weight or diameter for this part.
What's Included
- 1 x Victron VE.Direct Cable 0.9 m
Pick The Right Cable For Your Panel Layout
The Victron VE.Direct Cable 0.9 m is a small part that keeps your power system talking. At Outbound Power, we focus on real-world backup power, RV, marine, and off-grid planning. If you want help choosing the right length or confirming that your devices have the ports they need, the Outbound Power team is happy to help.
Victron VE.Direct Cable 0.9 m Specifications
|
| Product |
| Model |
ASS030530209 |
| Name |
VE.Direct Cable 0,9m |
| Cable |
| Length |
0.9 m (2.95 ft) |
| Connector |
Straight |
| Maximum VE.Direct cable length |
10 m, cannot be extended |
Victron VE.Direct Cable 0.9 m Declaration of Conformity