BougeRV 28in Adjustable Solar Panel Tilt Mount Brackets

The BougeRV 28in Adjustable Solar Panel Tilt Mount Brackets Angle a Small Rigid Panel From 0° to 90° to Face the Sun

The BougeRV 28in Adjustable Solar Panel Tilt Mount Brackets hold a small rigid solar panel at an angle instead of flat. Each set has four 28 in aluminum mounting rails, two 14.6 in aluminum tilt brackets and the steel hardware to put them together.

They're built for off-grid solar on RVs, motorhomes, boats, flat roofs, garages and the ground. BougeRV lists them for 50W, 75W and 100W panels up to 28 in wide.

BougeRV 28in Adjustable Solar Panel Tilt Mount Brackets Features

Tilt From 0° to 90°

Set the panel flat, upright or anywhere between as the seasons change. BougeRV says a tilted panel can collect up to 50% more solar energy than one mounted flat.

Flat Mode for Securing and Storage

Lower the brackets to flat mode when you want to fix the panel in place or put it away.

Rust-Free Aluminum Alloy

The rails and tilt brackets are aluminum alloy that BougeRV describes as rust-free and suited to all climate conditions. At 4.4 lb for a full set, BougeRV describes the design as lightweight and portable.

Four-Step Assembly

Pre-drilled holes and stainless steel fasteners keep assembly to four steps, and knob bolts let you change the angle by hand.

Real-World Applications

RV and motorhome roofs. Tip a 100W panel toward the sun while you're parked.

Boats and marine use. Mount a small panel on a flat surface aboard.

Ground setups. Stand a panel up beside your camper on level ground.

Practical Comparison

Tilt Mount Versus Flat Mount

A flat mount holds the panel parallel to the roof all year. A tilt mount lets you aim it toward the sun as the seasons change.

Tilted Position Versus Flat Mode

Tilt the panel when you're set up. Bring it down to flat mode to secure or store it.

Buyer Guidance

Checking Panel Size

The maximum panel width is 28 in and the maximum power is 100W. BougeRV's sizing chart lists a 50W panel mounted vertically or a 100W panel mounted horizontally, and among its own panels BougeRV says only the 100W rigid panels are supported. Measure your panel before you order.

This May Be A Good Fit If

• Your rigid panel is 100W or less
• Your panel is 28 in wide or less
• You mount on an RV, boat, flat roof or the ground

Common Questions

What Angles Can I Set?

Anywhere from 0° to 90°. BougeRV's diagram shows the brackets at 15°, 30°, 60° and 90°.

How Long Are the Parts?

The mounting rails are 28 in and the tilt brackets are 14.6 in.

Does One Set Hold One Panel?

BougeRV's photos show one set of four rails and two tilt brackets holding one panel.

What's Included

• 4 x Aluminum Mounting Rail
• 2 x Aluminum Tilt Angle Bracket
• 6 x Steel Knob Bolt
• 6 x Steel Wing Nut
• 4 x Steel Flange Nut
• 4 x Steel Split Lock Washer
• 4 x Steel Flat Washer
• 4 x Steel Hex Bolt
• 6 x Steel Self-Tapping Screw
• 6 x Plastic Retaining Ring

Point a Small Panel at the Sun

The BougeRV 28in Adjustable Solar Panel Tilt Mount Brackets give a small rigid panel a 0° to 90° tilt on rust-free aluminum rails, plus a flat mode for storage. If you'd like help checking the fit with your panel, the Outbound Power team is happy to help.