Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The Go Power! 110 Watt OBSIDIAN Series 9 RV Solar Kit pairs one 110W monocrystalline OBSIDIAN Series 9 panel with a 30A PowerTrak MPPT charge controller, the Dometic SC-DB-MPPT-30-12. The panel measures 42.6 x 21.6 x 0.6 inches and weighs 11 pounds, and the kit comes with 1-meter solar connector leads and mounting hardware.
Go Power designed it as a compact starting point for RV owners and off-grid builders with limited roof space. The controller's two battery outputs and RV-C link also make it a fit for coaches that run PowerTrak components. Go Power gives the panel a 25-year power output warranty and the controller a 5-year warranty.
At 42.6 x 21.6 inches and 0.6 inches thin, the panel fits roof areas where a larger panel won't. Its monocrystalline cells are rated at 110W, with 20.5V and 5.1A at maximum power, a 24.2V open circuit voltage and a 5.4A short circuit current.
The cells use nine bus bars, which the spec sheet credits with improving efficiency. Tempered anti-reflective glass covers them, and the low-profile junction box has bypass diodes to resist shade losses. The anodized aluminum OBSIDIAN frame has an aerodynamic shape that sits close to the roof.
Unlike a PWM controller, which runs the panel close to battery voltage, this MPPT controller tracks the panel's maximum power point as light and temperature change. The manual rates it at up to 98% conversion efficiency and up to 99.9% tracking efficiency. It charges at up to 30A in total and accepts up to 600W of solar at 12V (1,200W at 24V), with a 96V open circuit limit. A second battery output trickle charges a starter or auxiliary battery at up to 2.5A, so you can maintain the starter battery while the RV is parked.
Choose gel, AGM, flooded, LiFePO4 or a custom profile. The controller works with LiFePO4 batteries that have a built-in battery management system. It charges in bulk, absorption and float stages, with optional equalization, and an external temperature sensor port adds temperature compensation for lead acid batteries.
The controller reports solar power, battery voltage, charge state, daily amp-hours and fault codes over RV-C. Add a PowerTrak Display to see that data and change settings, then pair the display with the Go Power! Connect app to check your system from a phone. Up to eight controllers can work together on one system.
The controller protects against battery reverse polarity, over temperature, internal overvoltage, PV overcurrent and reverse current from the battery to the panel. Green, yellow and red LEDs show charging, warning and fault status. Go Power describes the controller as UL Listed, with UL 1741 among its standards.
Smaller trailers and campers. Fit a complete solar kit on a roof with limited open space.
Van builds and overland rigs. Go Power calls the 11-pound panel lightweight, and the spec sheet names overland rigs and custom van builds among its uses.
PowerTrak coaches. Add solar charging that shows up on the PowerTrak Display beside your other PowerTrak devices.
RV storage. Use the second battery output to maintain the starter battery while the house battery charges.
A PWM controller holds the panel near battery voltage. This kit's MPPT controller keeps finding the panel's maximum power point and is designed to pick the right peak when part of the array is shaded. It also adds a second battery output and RV-C reporting.
The kit starts with one 110W panel. When you need more output, Go Power offers the KIT1060, a matching 110W OBSIDIAN Series 9 expansion kit, so the added panel keeps the same low profile on your roof.
Mount the controller indoors, vertically on a non-flammable surface with the terminals facing down, as close to the battery as you can and with 6 inches of clearance above and below. The manual calls for 10 AWG wire and a 30A fuse to the main battery, and 16 AWG wire and a 10A fuse to the second battery. Keep the main battery run within 10 feet, the second battery run within 20 feet and the run from the solar array to the battery within 25 feet. Fuses and breakers are not supplied with the controller.
The controller ships set to the AGM profile, and its manual names the PowerTrak Display, sold separately, as the remote for changing settings. Plan on one if you run lithium or want to see solar and battery data.
Yes. The controller has a LiFePO4 profile for lithium iron phosphate batteries with a built-in battery management system, plus gel, AGM, flooded and custom profiles. Because the default is AGM, select the lithium profile with a PowerTrak Display.
The controller charges on its own and shows its status on three LEDs. To view data or change settings, you need a PowerTrak Display, sold separately.
Yes. Go Power offers the KIT1060 110W expansion kit to add output. The controller is rated for up to 600W of solar at 12V, and the Outbound Power team can help you plan the wiring for a larger array.
Go Power gives the panel a 25-year power output warranty and the controller a 5-year warranty.
The Go Power! 110 Watt OBSIDIAN Series 9 RV Solar Kit gives a small roof an 11-pound, low-profile 110W panel and a 30A dual bank MPPT controller that reports over RV-C, with a matching expansion kit available. If you'd like help planning cable runs, fuses or a PowerTrak Display for your rig, the Outbound Power team is happy to help.
Go Power! 110 Watt OBSIDIAN Series 9 RV Solar Kit With 30 Amp PowerTrak MPPT Controller Specifications |
|
|---|---|
| Model | KIT1059 |
| Kit Contents | |
| Solar Panel | 1 x 110 W OBSIDIAN Series 9, monocrystalline |
| Charge Controller | 1 x 30 A PowerTrak MPPT (SC-DB-MPPT-30-12) |
| Connectors | 1 m solar connector leads |
| Mounting | Mounting hardware |
| PowerTrak Display | Not included, sold separately |
| Solar Panel | |
| Rated Power (Pm) | 110 W |
| Max Power Voltage (Vmp) | 20.5 V |
| Max Power Current (Imp) | 5.1 A |
| Open Circuit Voltage (Voc) | 24.2 V |
| Short Circuit Current (Isc) | 5.4 A |
| Max System Voltage | 300 VDC |
| Cell Type | Monocrystalline, 9 bus bar |
| Glass | Tempered, anti-reflective |
| Frame | Anodized aluminum, 0.6 in low profile |
| Mounting Style | Omni-Rail |
| Junction Box | Low profile, bypass diodes |
| Expansion | KIT1060 110 W expansion kit |
| Charge Controller | |
| Type | MPPT, dual bank |
| System Voltage | 12/24 V |
| Max Total Charge Current | 30 A |
| Max Secondary Charge Current | 2.5 A |
| Max Panel Input Voltage | 96 Voc |
| Max PV Power Input | 600 W at 12 V, 1200 W at 24 V |
| Conversion Efficiency | Up to 98% |
| MPPT Tracking Efficiency | Up to 99.9% |
| Battery Types | Gel, AGM, Flooded, LiFePO4 (with BMS), Custom |
| Default Battery Type | AGM |
| Battery Outputs | 2 |
| Charging Stages | Bulk, absorption, float, optional equalization |
| Temperature Compensation | -24 mV/°C default, configurable, none for lithium |
| Temperature Sensor | External sensor port |
| Idle Current | 36.5 mA at 12.5 V |
| Status Indicators | Green, yellow and red LEDs |
| Communication | RV-C, PowerTrak compatible |
| Stacking | Up to 8 controllers |
| Terminals | Tool-less lever terminals |
| Max Wire Gauge (Battery 1 and 2) | 8 AWG |
| Battery 1 Wire and Fuse | 10 AWG, 30 A |
| Battery 2 Wire and Fuse | 16 AWG, 10 A |
| Max Wire Length, Array to Battery | 25 ft (7.6 m) |
| Max Wire Length, Battery 1 | 10 ft (3.0 m) |
| Max Wire Length, Battery 2 | 20 ft (6.0 m) |
| Protection | Battery reverse polarity, over temperature, internal overvoltage, PV overcurrent, reverse current |
| Water Ingress Protection | IP32, indoor mounting only |
| Operating Temperature (Without Derating) | -40 to 55°C |
| Storage Temperature | -40 to 60°C |
| Humidity | 95% non-condensing |
| Standards | UL 1741, FCC Part 15 Class B, RoHS |
| Physical | |
| Panel Dimensions | 42.6 x 21.6 x 0.6 in (1083 x 550 x 17 mm) |
| Panel Weight | 11 lb (5 kg) |
| Controller Dimensions | 7.55 x 6.97 x 2.6 in (192 x 177 x 68 mm) |
| Controller Weight | 7 lb (3.18 kg) |
| Controller Mounting | Vertical, terminals down, 6 in (150 mm) clearance above and below |
| Warranty | |
| Panel | 25 years, power output |
| Controller | 5 years |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
