The Go Power! Advanced Lithium Battery Data Terminating Resistor End Cap Closes Off Your Battery Data Chain So the Bank Reports Cleanly
The Go Power! Advanced Lithium Battery Data Terminating Resistor End Cap (GP-RVC-BCR) plugs into the data port on a Go Power! Sun Cycle Advanced Lithium battery and terminates the battery data chain. Go Power says this lets the battery network report cleanly to the PowerTrak display.
It fits the 100Ah and 300Ah Advanced Lithium batteries, and Go Power calls for it in any multi-battery or PowerTrak networked system.
Go Power! Advanced Lithium Battery Data Terminating Resistor End Cap Features
Terminates the Battery Data Chain
Advanced Lithium batteries share data with each other and with PowerTrak over their data ports. The end cap closes the open port at the end of that chain so the network communicates properly.
Compact Plug-In End Cap
The terminator is a short plug with a knurled, threaded connector on one end and a multi-pin face. There's no cable to route; it sits right at the battery's data port.
Built for Sun Cycle Advanced Lithium Batteries
Go Power lists it for the Sun Cycle Advanced Lithium 100Ah (GP-ADV-LIFEPO4-100) and 300Ah (GP-ADV-LIFEPO4-300) batteries.
Real-World Applications
One battery on PowerTrak. Go Power calls for one end cap when a single Advanced Lithium battery is connected to the network with the GP-RVC-BC system cable.
Multi-battery banks. When two or more Advanced Lithium batteries are linked with data cables, Go Power calls for two, one at each end of the battery data chain.
Practical Comparison
Battery End Cap Versus the PowerTrak Terminating Resistor Harness
The GP-RVC-PT-TR terminating resistor harness terminates the main PowerTrak harness, and Go Power uses one per PowerTrak system at the battery or shunt end. The GP-RVC-BCR end cap terminates the battery data chain instead. One is not a substitute for the other, and Go Power says most networked Advanced Lithium systems need both.
Buyer Guidance
How Many to Order
A single Advanced Lithium battery that isn't networked doesn't need an end cap. A single battery on the network takes one. A bank of two or more linked batteries takes two, one at each end of the data chain. Order the GP-ADV-BC-400 or GP-ADV-BC-600 data cables for the links between batteries. Because the count can change with your layout, our team can confirm it before you order.
This May Be A Good Fit If
- You own Go Power! Advanced Lithium batteries
- You're linking batteries with data cables
- You're adding batteries to a PowerTrak system
Common Questions
Do I Need One With a Single Battery?
Only if the battery is cabled into a PowerTrak network. A single battery that isn't networked doesn't need one.
How Many Do I Need With Two or More Batteries?
Go Power calls for two, one at each end of the battery data chain.
Is This the Same as the GP-RVC-PT-TR?
No. The PT-TR terminates the main PowerTrak harness, while this end cap terminates the battery data chain.
What's Included
- 1 x Advanced Lithium Battery Data Terminating Resistor End Cap
Clean Communication Across Your Battery Bank
The Go Power! Advanced Lithium Battery Data Terminating Resistor End Cap finishes the battery data chain so your Advanced Lithium bank can communicate properly with PowerTrak. If you'd like help counting the end caps and data cables your system needs, the Outbound Power team is happy to help.
Go Power! Advanced Lithium Battery Data Terminating Resistor End Cap Specifications
|
| Model |
GP-RVC-BCR |
| Electrical |
| Function |
Battery data-port terminating resistor (end cap) |
| Terminates |
Advanced Lithium battery data chain |
| Fit |
| Compatible Batteries |
GP-ADV-LIFEPO4-100, GP-ADV-LIFEPO4-300 |
| Quantity, Single Networked Battery |
1 (with the GP-RVC-BC system cable) |
| Quantity, 2 or More Linked Batteries |
2 (one at each end of the battery data chain) |
| Single Battery, Not Networked |
Not needed |
| Used With |
GP-ADV-BC-400 and GP-ADV-BC-600 data cables |
| Not a Substitute For |
GP-RVC-PT-TR PowerTrak harness terminator |
| Physical |
| Connector |
Knurled, threaded multi-pin plug |