The Go Power! ASW-R Inverter Remote Switch Puts On and Off Control for Your ASW Inverter Where You Can Reach It
The Go Power! ASW-R is the remote on/off switch for Go Power! Advanced Sine Wave (ASW) inverters with transfer switch. A 25 ft cable runs from the switch back to the inverter, so the inverter can stay in the battery bay while you control it from a cabinet face, the entry door or beside the breaker panel.
Go Power! ASW-R Inverter Remote Switch Features
One-Button On and Off
The ASW-R has a single round push button under an Inverter label, with Dometic branding on the lower panel. Press it to turn the inverter on or off without opening the compartment. It is an on/off switch only and does not show inverter status.
25 Ft Cable to the Remote Port
The cable plugs into the remote switch port on the inverter's DC end. Its 25 ft length gives you room to route from the living space to the inverter location.
Uses the Inverter's Remote Position
ASW inverters have a three-position On/Off/Remote main switch. Set it to Remote and the ASW-R takes over on and off control, with no rewiring of the inverter.
Real-World Applications
RV entry doors and galleys. Turn the inverter off when you leave camp and back on when you need AC, without reaching into a storage bay.
Boats. Keep inverter control in the cabin while the ASW inverter stays in its dry compartment.
Practical Comparison
Remote Switch Versus the Inverter's Main Switch
The main switch sits on the inverter itself. The ASW-R gives you the same on and off control from a distance. When the main switch is in its On or Off position, the inverter follows that switch and ignores the remote, so the Remote position is what hands control to the ASW-R.
Remote Switch Versus a Display
A basic remote switch only turns the inverter on and off. For settings, status and battery data on one screen, Go Power points to its PowerTrak display, since ASW inverters are PowerTrak and RV-C compatible.
Buyer Guidance
Check Your Inverter
Go Power lists the ASW-R for the ASW-1200-12-TS, ASW-1800-12-TS and ASW-3000-12-TS. Go Power! Smart Sine Wave (SSW) inverters and Advanced Inverter/Chargers (AIC) use the SSW-R instead. Section 3.1 of the ASW manual covers remote operation.
Plan the Location
Choose a spot within reach of the 25 ft cable, such as a cabinet face, the entry door or next to the breaker panel, and route the cable to the inverter's remote switch port.
This May Be A Good Fit If
- You own a Go Power! ASW inverter with transfer switch
- Your inverter is mounted in a bay or compartment
- You want simple on and off control from inside
Common Questions
Why Doesn't the Remote Turn the Inverter On?
Check that the inverter's main On/Off/Remote switch is set to Remote. In the On or Off position, the inverter ignores the remote switch.
Does It Show Inverter Status?
No. It is an on/off switch. For status and settings, add a PowerTrak display.
Will It Work With an SSW Inverter?
No. Go Power lists the SSW-R for SSW inverters and AIC inverter/chargers.
What's Included
- 1 x ASW-R Inverter Remote Switch With 25 Ft Cable
Simple Control for Your ASW Inverter
The Go Power! ASW-R Inverter Remote Switch gives your ASW-1200, ASW-1800 or ASW-3000 inverter a convenient on/off button with a 25 ft cable and no rewiring. If you'd like help confirming the right remote for your inverter, the Outbound Power team is happy to help.
Go Power! ASW-R Inverter Remote Switch Specifications
|
| Model |
ASW-R |
| Electrical |
| Type |
Remote on/off switch, push button |
| Status Display |
None (on/off only) |
| Cable and Connection |
| Cable Length |
25 ft |
| Inverter Connection |
Remote switch port on the inverter's DC end |
| Inverter Setting |
Main On/Off/Remote switch set to Remote |
| Fit |
| Compatible Inverters |
ASW-1200-12-TS, ASW-1800-12-TS, ASW-3000-12-TS |
| Not Compatible With |
SSW inverters and AIC inverter/chargers (use the SSW-R) |
Go Power! ASW-R Inverter Remote Switch Manual