Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The Go Power! Bluetooth Remote Display (model GP-RVC-R) is a surface-mounted LCD remote for the Go Power! GP-RVC-10-MPPT and GP-RVC-30-MPPT solar charge controllers. Those controllers show status on LEDs only, so this remote is how you read their numbers from inside the RV and change their settings.
It connects to the controller with the included 25 foot cable and draws its power from that cable, so no separate supply is needed. Built-in Bluetooth brings the same data to the Go Power! Connect app on iOS and Android.
The main screen shows PV voltage and current, battery voltage and current for each output on the dual bank controller, the controller's internal temperature, its charge state or fault, and Bluetooth connection status. Status screens add run time, total watt hours and amp hours, and amp hours for today and each of the past three days.
Up, Down, Enter and Back buttons open the settings, where you can set the charging current limit, battery type and capacity, and voltage setpoints for custom profiles. Commands let you force the controller into bulk or float, reset settings to factory defaults and clear history. On the 30 amp controller you can force charge either battery bank.
Pair your phone with the remote for live status monitoring and settings configuration in the Go Power! Connect app.
Controllers mounted out of view. Check charging from an interior wall instead of visiting the controller.
Parallel systems. With several GP-RVC-30-MPPT controllers on one bank, the remote shows combined device status plus a status screen for each controller.
Without the remote, the GP-RVC controllers report only through their status LEDs. The remote adds a dedicated readout, setting changes and Bluetooth app access.
The GP-RVC-R works with the GP-RVC-10-MPPT and GP-RVC-30-MPPT only. Go Power says it does not work with PWM controllers or the Dometic SC-DB-MPPT series, which use the PowerTrak display. Plan the location so the cable can run from the controller to the remote. Installation takes a Phillips screwdriver and a drill with a 1 inch bit or hole saw.
Yes. The GP-RVC MPPT controllers have status LEDs only, and Bluetooth monitoring in the Go Power! Connect app comes through this remote.
No. It's powered over the data cable from the controller.
Drill a 1 inch hole using the template in the manual, feed the cable through and connect it, fasten the remote with the provided screws, then snap on the cover plate to hide them.
Go Power warrants the GP-RVC-R for five years from the date of shipment from its factory against defects in materials and workmanship.
The Go Power! Bluetooth Remote Display gives your GP-RVC MPPT controller a wall readout, full settings access and phone monitoring, powered by the controller itself. If you'd like help confirming compatibility or planning the cable run, the Outbound Power team is happy to help.
Go Power! Bluetooth Remote Display for RV-C MPPT Solar Controllers Specifications |
|
|---|---|
| Model | GP-RVC-R |
| Fit | |
| Compatible Controllers | GP-RVC-10-MPPT, GP-RVC-30-MPPT |
| Not Compatible With | PWM controllers, Dometic SC-DB-MPPT series |
| Display and Controls | |
| Display | LCD |
| Buttons | Up, Down, Enter, Back |
| Readouts | PV voltage and current, battery voltage and current (BAT1/BAT2), charge state, faults, temperatures, amp hours and watt hours |
| Settings | Charging current limit, battery type, capacity, charge setpoints |
| Commands | Force bulk or float, reset to defaults, clear history |
| Electrical | |
| Connection | RJ12 connector, 25 ft cable included |
| Power | From the controller data cable |
| Bluetooth | Go Power! Connect app (iOS and Android) |
| Physical | |
| Mounting | Surface mount, interior wall |
| Mounting Hole | 1 in diameter |
| Warranty | |
| Warranty | 5 years |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
