Go Power! PowerTrak RV-C Adapter for IC Series Inverter Chargers

The Go Power! IC Series RV-C Adapter Brings Your Classic IC Series Inverter Charger Onto a PowerTrak RV-C Network

The Go Power! GP-IC-RVC-ADAPTER connects a classic Go Power! IC Series inverter charger, the GP-IC-2000-12 or GP-IC-3000-12, to the PowerTrak RV-C network. Once it's installed, you can monitor and control the inverter charger from the PowerTrak display instead of going to the unit itself.

It's for RV owners and installers who already run an IC Series inverter charger and want it on the same RV-C network as other PowerTrak components. The adapter label reads "Remote port to RV-C adapter for inverter charger," and it links to the inverter charger through the GP-IC-RVC-HARNESS, sold separately.

Go Power! IC Series RV-C Adapter Features

PowerTrak Monitoring and Control for IC Series Units

The IC Series connects to its controls through a wired remote port. This adapter turns that remote port connection into an RV-C connection, so the IC Series can be watched and controlled from the PowerTrak display alongside the rest of your PowerTrak system.

Made for the GP-IC-2000-12 and GP-IC-3000-12

Go Power names both classic IC Series models for this adapter. On those units, the IC Series manual shows a remote control port on the unit, the same port used by the optional IC Series remote.

Compact Flanged Enclosure

The adapter sits in a small black enclosure with a mounting flange and a hole at each end, so it can be fastened in place near the inverter charger. One end has a multi-pin connector marked MAIN and a second jack marked Not Used.

Real-World Applications

Upgrading an existing RV system. Add PowerTrak monitoring to a coach that already has an IC Series inverter charger, without replacing the inverter charger.

Central control. Keep inverter charger status on the same PowerTrak display you use for other RV-C components.

Practical Comparison

RV-C Adapter Versus the GP-ICR-50 Remote

The GP-ICR-50 is the IC Series wired remote. The IC Series manual says it displays the unit's real-time operating status, changes inverter, charger and pass-through settings, and runs the equalize charge. The RV-C adapter takes a different route: it places the IC Series on the PowerTrak RV-C network so the PowerTrak display can monitor and control it.

Buyer Guidance

Order the Harness Too

The adapter needs the GP-IC-RVC-HARNESS between the adapter and the inverter charger, and the harness is sold separately. Confirm your inverter charger model before ordering, since both parts are made for the classic IC Series. Because the adapter uses the IC Series remote port, check with our team first if a GP-ICR-50 remote is already plugged into that port.

This May Be A Good Fit If

• You own a GP-IC-2000-12 or GP-IC-3000-12
• Your RV runs a PowerTrak RV-C display
• You want inverter charger monitoring on that display

Common Questions

Which Inverter Chargers Does It Work With?

Go Power lists the classic IC Series inverter chargers, the GP-IC-2000-12 and GP-IC-3000-12.

Do I Need Anything Else?

Yes. You need the GP-IC-RVC-HARNESS to connect the adapter to the inverter charger, and a PowerTrak display on the RV-C network to monitor and control it.

Where Does It Plug Into the Inverter Charger?

The adapter label describes it as a remote port to RV-C adapter, and the harness runs between the adapter and the IC Series unit. On the adapter, the multi-pin connector is marked MAIN and the second jack is marked Not Used.

What's Included

• 1 x GP-IC-RVC-ADAPTER IC Series RV-C Adapter

Connect Your IC Series to PowerTrak

The Go Power! IC Series RV-C Adapter lets a classic IC Series inverter charger join a PowerTrak RV-C network for monitoring and control from the PowerTrak display. If you'd like help confirming the parts for your system, the Outbound Power team is happy to help.