The Go Power! White Solar Cable Entry Plate Gives Your Rooftop Solar Wiring a Clean, Sealed Way Into Your RV
The Go Power! White Solar Cable Entry Plate is a white roof plate for bringing solar wiring from your rooftop panels into your RV. It gives the wires a clean, sealed entry point, so you don't have to run them down through the fridge vent.
This version is the plate only. No wires or leads are included, so you wire it with your own solar cable. It suits RV owners and installers who want to supply their own cable for the run.
Go Power! White Solar Cable Entry Plate Features
A Sealed Roof Entry Instead of the Fridge Vent
The plate gives your rooftop solar wiring its own entry point through the roof. Your solar wires stay out of the fridge vent, and the roof entry stays neat and sealed.
Plate Only, Wired With Your Own Solar Cable
No wires or leads come with this plate. You supply the solar cable and wire it to suit your install, which is handy if you already have cable on hand.
Compact Footprint With Four Mounting Holes
The plate measures 5.31 in x 4.41 in. Its four mounting holes sit 4.57 in x 3.66 in apart on center, so you can mark and check the roof location before you start the install.
Real-World Applications
New rooftop solar installs. Bring panel wiring from the roof into your RV through a dedicated entry point.
Moving wiring out of the fridge vent. Give your solar wiring its own sealed roof entry instead of the vent route.
Practical Comparison
White Cable Entry Plate Versus the Cable Entry Plate Kit
The Go Power! Cable Entry Plate Kit comes with pre-attached leads in 10 in, 7 ft, 10 ft or 25 ft lengths. This white plate has no wires, so you provide and connect your own solar cable. Choose the kit if you want the leads already in place, or this plate if you'd rather wire it yourself.
Buyer Guidance
Plan Your Own Cable Run
Because no wires are included, work out the solar cable you'll need from the panels, through the plate and on to the rest of your solar system before you order.
Check the Mounting Area
The plate needs a roof area of at least 5.31 in x 4.41 in. Lay out the four mounting holes at 4.57 in x 3.66 in on center.
This May Be A Good Fit If
- You're adding rooftop solar to your RV
- You want solar wiring out of the fridge vent
- You plan to wire it with your own solar cable
- You prefer a white plate on your roof
Common Questions
Does This Plate Come With Wires?
No. It's the plate only, with no wires or leads. You wire it with your own solar cable.
How Big Is the Plate?
The plate measures 5.31 in x 4.41 in. The mounting holes are 4.57 in x 3.66 in on center.
Is There a Version With Leads Attached?
Yes. The Go Power! Cable Entry Plate Kit comes with pre-attached leads in 10 in, 7 ft, 10 ft or 25 ft lengths.
What's Included
- 1 x White Solar Cable Entry Plate
A Dedicated Roof Entry for Your Solar Wiring
The Go Power! White Solar Cable Entry Plate gives your rooftop solar wiring a clean, sealed path into your RV without using the fridge vent, and you wire it with the solar cable you choose. If you have questions about your roof entry or cable run, the Outbound Power team is happy to help.
Go Power! White Solar Cable Entry Plate Without Wires Specifications
|
| Model |
GP-CEP-W |
| Fit |
| Use |
Routes rooftop solar wiring into an RV |
| Entry Type |
Sealed roof entry point (instead of the fridge vent) |
| Wires or Leads |
None included (plate only) |
| Wiring |
Your own solar cable |
| Physical |
| Color |
White |
| Plate Size |
5.31 x 4.41 in |
| Mounting Hole Spacing |
4.57 x 3.66 in on center |
| Mounting Holes |
4 |