Renogy 5FT 6AWG Anderson Adapter Cable Anderson PP75 to Anderson SB120

The Renogy 5FT 6AWG Anderson Adapter Cable Anderson PP75 to Anderson SB120 Links Your REGO Charger to the Combiner Box With a Click

The Renogy 5FT 6AWG Anderson Adapter Cable Anderson PP75 to Anderson SB120 is a red and black cable pair with two kinds of Anderson connectors. Anderson PP75 connectors are on one end and an Anderson SB120 connector is on the other. Renogy designed it to connect a REGO charge controller or DC-DC battery charger to a REGO combiner box.

It is made for REGO system builders who want plug-in connections instead of custom wiring. Renogy says you need no special tools and no complicated wiring.

Renogy 5FT 6AWG Anderson Adapter Cable Anderson PP75 to Anderson SB120 Features

PP75 and SB120 Ends Match the REGO System

The PP75 connectors go to the REGO solar charge controller or battery charger. The SB120 connector goes directly to the REGO system combiner box.

Plug and Play Setup

Renogy says the Anderson connectors reduce system setup time and lower the risk of short circuits, misconnections and connection failures. The positive and negative wires carry + and - labels near the PP75 plugs.

6 AWG Tinned Copper Wire

The wire is high-purity oxygen-free tinned copper in 6 AWG, rated for 600 V. The 5 FT length does not include the connectors.

Heavy-Duty Build for Heat and Vibration

Renogy designed the cables for temperatures from -40°C to 105°C. The contacts are silver plated, and the connectors have been tested under harsh vibration conditions.

Real-World Applications

REGO charge controller to combiner box. Connect a REGO MPPT charge controller to the REGO system combiner box.

REGO DC-DC charger to combiner box. Do the same for a REGO DC-DC battery charger.

Vehicle and outdoor systems. Renogy lists RV, marine, camping, outdoor, cabin and truck uses.

Practical Comparison

Anderson Adapter Cable Versus Custom Crimped Cable

A custom cable needs lugs, crimping and careful polarity checks at each end. This cable arrives with connectors fitted and red and black polarity labeled, so you can plug it in.

Buyer Guidance

Check Both Connector Types

This cable has PP75 plugs on one end and an SB120 on the other. Confirm your REGO equipment uses those connections before you order.

This May Be A Good Fit If

• You use a REGO charge controller or DC-DC charger
• Your REGO combiner box takes an Anderson SB120 connector
• You want plug-in connections with no special tools

Common Questions

Can I turn the PowerPole connectors to a different orientation?

Renogy says these are standard Anderson Powerpole connectors. The plastic ridges and grooves can be gently pried apart with a thin item like a pocketknife blade. Then the connectors can be slid into your preferred orientation.

Can I pair it with my existing Anderson cable?

Renogy says it will pair with any standard Anderson PowerPole setup, even with an existing cable.

Can I replace a damaged connector?

Yes. Renogy says you can buy a replacement terminal of the same size. The Anderson terminal here is the SB120 or PP75 specification.

What's Included

• 1 x Renogy 5FT 6AWG Anderson Adapter Cable (Pair)

Simple Connections With the Renogy 5FT 6AWG Anderson Adapter Cable Anderson PP75 to Anderson SB120

The Renogy 5FT 6AWG Anderson Adapter Cable Anderson PP75 to Anderson SB120 gives your REGO equipment a plug-in route to the combiner box. If you are unsure it fits your system, the Outbound Power team is happy to help.