Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The Rich Solar 100 Watt SLIM ONYX Solar Kit (RS-K100SL) is a 12V solar charging kit built around one 100W MEGA 100 SLIM ONYX panel (RS-M100SLB) and a BRAVO 30 30A MPPT charge controller with built-in Bluetooth. Rich Solar estimates that the 100W panel produces approximately 0.4kWh of energy per day under 4 peak sun hours. The kit also includes a 30 foot 10 AWG solar cable set, red and black 10 foot 10 AWG battery cables, a set of four Z brackets and a 10A inline fuse holder for the solar circuit.
At 15.8 inches wide and 50 inches long, the single panel fits strips of roof that a wider panel can't use. Rich Solar builds its Slim Kits for RVs, vans, trailers, boats, tiny homes and other off-grid charging systems. You supply the 12V battery, since no battery or inverter is included.
The MEGA 100 SLIM ONYX panel measures 50.0 x 15.8 x 1.2 inches (1270 x 400 x 30 mm) and weighs 12.4 lb (5.6 kg). Rich Solar designed the slim profile to give you more placement options on compact rooftops. The ONYX panels are all black, including the frame.
The panel uses 34 N-Type TOPCon cells (2 x 17), with up to 25.1% cell efficiency and 19.7% module efficiency. It's rated 100W with a 0 to +5W power tolerance, 5.10A at a maximum power voltage of 19.6V, and 23.6V open circuit. It has 3.2 mm AR-coated tempered glass, an anodized aluminum frame and an IP67 junction box, with mechanical strength certified to 5400 Pa positive and 2400 Pa negative load.
The BRAVO 30 tracks the array's maximum power point at 99.5% efficiency or better and converts it to charging power at up to 98% efficiency. Rich Solar rates it for a nominal 500W of solar at 12V and 1,000W at 24V, with up to 100V of open-circuit input and 30A of charging current, so this 100W panel is within its rating. It detects a 12V or 24V battery automatically and guards against reverse polarity, short circuits, reverse current at night and overheating.
Built-in Bluetooth connects the BRAVO 30 to the RICH SOLAR app, so you can check charging from your phone. The LCD shows solar voltage, current, power and kWh plus battery voltage, charging current and charged amp-hours. A remote display and a battery temperature sensor are optional.
Presets cover LiFePO4 (LFP), LTO, LCO, lead crystal, Gel, AGM, flooded and calcium batteries, plus a custom setting for your battery maker's voltages. AGM is the default, so choose your battery type during setup. If a lithium battery's BMS has shut it off after a deep discharge, the controller tries to wake it automatically.
Vans and campers. Fit one slim panel on a crowded van roof and keep a 12V house battery charged for lights, fans and device charging.
Travel trailers. Add solar charging to a small trailer without giving up the roof space around vents and hatches.
Boats. Keep a 12V house battery topped up between trips.
A PWM controller is a simpler design, but it can't turn surplus panel voltage into extra charging current. The BRAVO 30 in this kit uses MPPT tracking instead, and it adds Bluetooth monitoring, an LCD and profiles for lithium and lead-acid batteries.
A wider panel of similar wattage can be hard to fit between roof vents, fans, hatches and racks. At 15.8 inches wide, the slim panel fits narrow strips of roof.
Rich Solar's wiring diagram for this kit puts the 10A inline fuse holder on the panel's positive lead, then uses the solar cables to reach the controller. It also shows an optional 30A ANL fuse on the battery's positive cable, which isn't included. The BRAVO 30 manual strongly recommends an inline fuse on the positive wire of both the solar and battery circuits, and asks you to cover the panel before connecting cables. If you add panels later, keep the array's open-circuit voltage under the controller's 100V limit, rated at -4°F (-20°C).
Mount the BRAVO 30 indoors on a vertical surface, out of the weather and as close to the battery as possible. No battery or inverter is included, so plan for a 12V battery that suits your loads and select its type in the controller's settings.
No. You'll need your own 12V battery. Rich Solar's wiring diagram shows its ALPHA 1 12V 100Ah LiFePO4 battery and NOVA PURE 2K 12V inverter as examples, and both are marked not included.
Rich Solar estimates approximately 0.4kWh of energy per day under 4 peak sun hours. Days with fewer peak sun hours will produce less.
The BRAVO 30 is rated for a nominal 500W of solar at 12V, so the controller has room beyond this kit's 100W. Any added panels must keep the array under the controller's 100V open-circuit limit at -4°F (-20°C) and its 30A solar input current. Ask our team to check the layout before you add panels.
Rich Solar backs the MEGA 100 SLIM ONYX with a 25-year power output warranty and a 10-year limited workmanship warranty.
The Rich Solar 100 Watt SLIM ONYX Solar Kit combines one 100W MEGA 100 SLIM ONYX panel (RS-M100SLB), a BRAVO 30 MPPT controller with Bluetooth, and the cables, brackets and fuse holder that connect them to your 12V battery. If you'd like help choosing a battery or planning your roof layout, the Outbound Power team is happy to help.
Rich Solar 100 Watt 12V SLIM ONYX Solar Kit With BRAVO 30 MPPT Controller Specifications |
|
|---|---|
| Model | RS-K100SL |
| Kit | |
| Total Solar Power | 100W |
| Panels | 1 x MEGA 100 SLIM ONYX 100W (RS-M100SLB) |
| Charge Controller | BRAVO 30 30A MPPT (RS-MPPT30PB) |
| Battery System Voltage | 12V |
| Estimated Daily Energy | About 0.4kWh per day under 4 peak sun hours |
| Battery | Not included |
| Inverter | Not included |
| Panel Wiring | Single panel |
| Solar Circuit Fuse | 10A inline fuse holder (included) |
| Battery Circuit Fuse | 30A ANL fuse, optional, not included (Rich Solar wiring diagram) |
| Kit Contents | |
| 12V 100W SLIM ONYX Solar Panel (RS-M100SLB) | 1 |
| 30 Foot 10 AWG Solar Cable Set, Panel to Controller (RS-30101) | 1 |
| 10 Foot 10 AWG Battery Cable (Red), Controller to Battery (RS-1010) | 1 |
| 10 Foot 10 AWG Battery Cable (Black), Controller to Battery (RS-1010) | 1 |
| BRAVO 30 12V/24V 30A MPPT Charge Controller (RS-MPPT30PB) | 1 |
| Mounting Z Bracket Set, Set of 4 (RS-ZB4C) | 1 |
| 10A Solar Panel Inline Fuse Holder (RS-SC10F) | 1 |
| Solar Panel | |
| Panel Model | MEGA 100 SLIM ONYX (RS-M100SLB) |
| Rated Power | 100W |
| Power Tolerance | 0 to +5W |
| Maximum Power Voltage (Vmp) | 19.6V |
| Maximum Power Current (Imp) | 5.10A |
| Open Circuit Voltage (Voc) | 23.6V |
| Short Circuit Current (Isc) | 5.38A |
| Maximum System Voltage | 1000VDC |
| Maximum Series Fuse Rating | 15A |
| Module Efficiency | 19.7% |
| Maximum Cell Efficiency | 25.1% |
| Cell Type | N-Type TOPCon |
| Cell Size | 7.2 x 2.8 in (182.2 x 70 mm) |
| Cell Layout | 34 cells (2 x 17) |
| Dimensions | 50.0 x 15.8 x 1.2 in (1270 x 400 x 30 mm) |
| Weight | 12.4 lb (5.6 kg) each |
| Glass | 3.2 mm (0.13 in) AR-coated tempered glass |
| Frame | Anodized aluminum alloy |
| Junction Box | IP67 |
| Connector | Solar connectors |
| Panel Cables | 4.0 mm2 (#12 gauge), 35.4 in (900 mm) |
| Temperature Range | -40°F to +185°F |
| Nominal Module Operating Temperature | 45°C +/- 2°C |
| Temperature Coefficient of Pmax | -0.35%/°C |
| Temperature Coefficient of Voc | -0.28%/°C |
| Temperature Coefficient of Isc | 0.045%/°C |
| Mechanical Load | 5400 Pa positive, 2400 Pa negative |
| Charge Controller | |
| Controller Model | BRAVO 30 (RS-MPPT30PB) |
| Controller Type | MPPT |
| Rated Charge Current | 30A |
| System Voltage | 12V/24V auto detection |
| Max PV Open Circuit Voltage | 100VDC at -4°F (-20°C) |
| Max Normal PV Input Voltage | 92VDC at 77°F (25°C) |
| Max PV Input Current | 30A |
| Max PV Short Circuit Current | 35A |
| Nominal PV Power | 500W at 12V, 1,000W at 24V |
| MPPT Voltage Range | 15-72VDC |
| MPPT Tracking Efficiency | 99.5% or higher |
| Conversion Efficiency | Up to 98% |
| Battery Types | LCO, LFP, LTO, Crystal, Gel, AGM, Flooded, Calcium, Custom |
| Default Battery Type | AGM |
| Charging Stages | 5-stage (lead-acid), 4-stage (lithium) |
| Temperature Compensation | -24 mV/°C |
| Self-Consumption | 12 +/- 0.5 mA |
| Bluetooth | Yes, RICH SOLAR app |
| Display | LCD with LED charging bar |
| Optional Accessories | Remote display, external battery temperature sensor |
| Terminals | Rated 50A connector |
| Protections | Reverse polarity, reverse current at night, short circuit, over-temperature with current derating, TVS surge |
| IP Rating | IP43 (circuit board), IP22 (connectors) |
| Mounting | Indoor, vertical surface |
| Operating Temperature | -13°F to 122°F (-25°C to 50°C) |
| Dimensions | 7.0 x 5.5 x 2.9 in |
| Net Weight | 1.76 lb (0.8 kg) |
| Standards | Designed to meet UL 1741 requirements; CE, FCC, RoHS |
| Warranty | |
| Solar Panel Power Output | 25 years |
| Solar Panel Workmanship | 10 years, limited |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
