Rich Solar 2/0 AWG Red and Black Pure Copper Inverter Battery Cables With 3/8 Inch Lugs

Rich Solar 2/0 AWG Inverter Battery Cables Give You a Factory-Terminated Red and Black Pair in Six Lengths From 1 to 6 Feet

Rich Solar 2/0 AWG Inverter Battery Cables connect a battery bank directly to an inverter. The set is one red and one black cable made with 2/0 AWG pure copper, and both ends of each cable carry a factory-installed 3/8 inch lug.

Lengths run from 1 ft to 6 ft in 1 ft steps, so you can match the set to the space between your batteries and inverter. The PVC insulation resists moisture, the cables carry a VW-1 flame rating, and Rich Solar lists them as UL certified with a voltage rating of up to 600V.

Rich Solar 2/0 AWG Inverter Battery Cables Features

2/0 AWG Pure Copper Construction

Rich Solar builds these cables with 2/0 AWG pure copper for dependable power transfer in high-current connections, such as the run from a battery bank to an inverter.

Lugs Installed and Ready to Bolt On

A 3/8 inch lug is pre-installed at each end of both cables. Out of the box, the set is ready to fasten to battery and inverter terminals that take a 3/8 inch lug.

Insulation Rated From -67°F to +275°F

The PVC jacket resists moisture and is rated for operation from -67°F to +275°F. It also carries a VW-1 flame rating.

Real-World Applications

Battery-to-inverter runs. Link a battery bank to its inverter with a matched pair that's already terminated.

Close or spread-out equipment. The 1 ft and 2 ft sets suit a battery and inverter mounted side by side, while the 5 ft and 6 ft sets cover a longer reach.

Practical Comparison

Color-Matched 2/0 AWG Set Versus Single-Color Cable

Cutting both runs from one spool of single-color cable leaves you marking the two runs by hand. This set pairs a red cable with a black one of the same length, already fitted with 3/8 inch lugs, so the two are easy to tell apart during installation.

Buyer Guidance

Confirm Gauge and Fusing With Your Inverter

Rich Solar doesn't name a specific inverter size for the 2/0 AWG set. Check the cable gauge and fuse your inverter's manual specifies before you order, and make sure your terminals accept a 3/8 inch lug.

Measure Before You Choose a Length

Run a tape measure along the path each cable will follow between terminals, then pick the shortest length that reaches comfortably.

This May Be A Good Fit If

• Your inverter manual calls for 2/0 AWG battery cable
• Your terminals take a 3/8 inch lug
• Your cable route between battery and inverter is 6 ft or less
• You want a factory-terminated red and black pair

Common Questions

What Lengths Are Available?

Six: 1 ft, 2 ft, 3 ft, 4 ft, 5 ft and 6 ft. Each option is a red and black set.

What Lug Size Do the Cables Use?

Both ends of each cable have a pre-installed 3/8 inch lug.

How Much Does Each Set Weigh?

Rich Solar lists gross weights from 2 lb for the 1 ft set up to 7 lb for the 6 ft set.

What's Included

• 1 x Rich Solar 2/0 AWG Red and Black Battery Cable Pair (Length Per Option Selected)

Pure Copper Cables Ready to Connect

The Rich Solar 2/0 AWG Inverter Battery Cables bring 2/0 AWG pure copper, 3/8 inch lugs on both ends and a UL certified, VW-1 rated jacket to your battery-to-inverter connection. For help choosing the right length or confirming the gauge your inverter needs, reach out to the Outbound Power team.