Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The Rich Solar 200 Watt 12V Solar Kit With Battery (model RS-K200B) puts solar charging and energy storage in one package. It includes one 200W MEGA 200 monocrystalline panel, a BRAVO 30 30A MPPT charge controller and a 12.8V 100Ah ALPHA 1 LiFePO4 battery, along with Z brackets, an inline fuse holder and the cables that connect them. Rich Solar estimates the array produces about 0.7kWh of energy per day under 4 peak sun hours.
Rich Solar designs the kit as a 12V DC off-grid system for RVs, campers, trailers, boats, cabins and similar setups. The ALPHA 1 stores 1.28kWh for evening use and backup power. An inverter isn't included, so plan to add a 12V inverter if you want to run AC appliances.
The MEGA 200 (RS-M200) is rated at 18.4V and 10.9A at maximum power, with a 21.8V open-circuit voltage and 20.2% module efficiency. It uses 3.2 mm anti-reflective coated tempered glass, an anodized aluminum frame and an IP67 junction box. Fourteen pre-drilled holes accept Z brackets, ground mounts, pole mounts and tilt mounts, and the panel is certified for 5400 Pa positive and 2400 Pa negative mechanical load.
The BRAVO 30 (RS-MPPT30PB) tracks the panel's maximum power point with up to 99.5% efficiency and converts it to battery charging power at up to 98%. It auto-detects 12V or 24V batteries and offers eight battery profiles plus a custom setting, including LiFePO4. An LCD with LED indicators shows solar input and battery status, and built-in Bluetooth connects to the RICH SOLAR app. Rich Solar lists ETL, FCC, CE and RoHS certification for this controller.
The ALPHA 1 (RS-B121S) is a 12.8V 100Ah LiFePO4 battery rated for more than 5,000 cycles at 80% depth of discharge. When the battery is at 41°F or colder and charging current is present, a 100W internal heater warms the cells and shuts off at 50°F. Bluetooth shows state of charge, voltage, current, temperature and cycle count in the RICH SOLAR app.
The ALPHA 1 measures 10.2 x 6.6 x 8.3 inches, weighs 24.0 pounds and is rated IP65. Its housing is UL94 V-0 flame-retardant plastic with M8 terminals. The built-in BMS covers over-charge, over-discharge, over-current, short circuit and high or low temperature, and it balances the cells.
One set of four Z brackets mounts the panel. A 15A inline fuse holder protects the panel's positive lead, a 30 ft 10 AWG solar cable set runs from the panel to the controller, and a 10 ft 10 AWG battery cable set connects the controller to the battery.
The BRAVO 30 is rated for up to 500W of solar on a 12V battery, which leaves headroom beyond the included 200W panel. The ALPHA 1 supports up to four batteries in parallel when you need more storage.
RVs, campers and trailers. Charge a 12V house battery from a roof-mounted panel and store the energy for evenings and cloudy days.
Boats. Charge a 12V lithium battery from solar on board, with the battery rated IP65 and the controller mounted in a dry, protected spot.
Cabins and sheds. Run 12V DC loads at an off-grid cabin or shed, then add an inverter later for AC power.
A PWM controller can't convert extra panel voltage into charging current. The BRAVO 30 uses MPPT tracking rated at up to 99.5%, so more of the panel's output reaches the battery. It also has Bluetooth monitoring built in.
A panel-only kit leaves you to choose and wire a battery yourself. This kit includes the ALPHA 1 with self-heating, Bluetooth and a 5-year warranty, plus the battery cables to connect it to the controller.
Mount the BRAVO 30 on a vertical surface indoors, protected from the weather and as close to the battery as practical. Connect the battery cables from the controller to the ALPHA 1 first, then fit the 15A inline fuse holder to the panel's positive lead and run the extension cables to the controller. Rich Solar shows an optional 30A ANL fuse between the controller and battery. The kit has no inverter, so add a 12V inverter sized to your AC loads if you need outlet power.
The ALPHA 1 charges between 32°F and 131°F and discharges between -4°F and 140°F. Its heater runs only while a charging source is connected, because the battery can't use its own power to heat. Below freezing, expect charging to start once the cells warm to 50°F.
No. It's a 12V DC solar and battery system. To power AC appliances, add a 12V inverter. Rich Solar shows its NOVA PURE 2K 12V inverter as an add-on for this kit.
Rich Solar estimates about 0.7kWh per day under 4 peak sun hours. Actual output depends on your location, season, panel angle and shading. The ALPHA 1 stores 1.28kWh.
Yes. The BRAVO 30 is rated for up to 500W of solar on a 12V system. You can connect up to four ALPHA 1 batteries in parallel; Rich Solar says to use the same model and bring each battery to within 1V of the others before connecting them.
Rich Solar gives the MEGA 200 panel a 25-year power output warranty and a 10-year workmanship warranty. The ALPHA 1 battery carries a 5-year warranty.
The Rich Solar 200 Watt 12V Solar Kit With Battery combines a MEGA 200 panel, a Bluetooth BRAVO 30 MPPT controller and a self-heating 1.28kWh ALPHA 1 battery with the brackets and cables to install them. If you'd like help sizing an inverter, planning a cable route or adding batteries, the Outbound Power team is happy to help.
Rich Solar 200 Watt 12V Solar Kit With Battery ALPHA 1 100Ah LiFePO4 Specifications |
|
|---|---|
| Model | RS-K200B |
| Kit Contents | |
| MEGA 200W 12V Solar Panel (RS-M200) | 1 |
| ALPHA 1 Lithium Battery (RS-B121S) | 1 |
| BRAVO 30 30A MPPT Charge Controller (RS-MPPT30PB) | 1 |
| Z Bracket Set, Set of 4 (RS-ZB4C) | 1 |
| 15A Solar Panel Inline Fuse Holder (RS-SC15F) | 1 |
| 30 ft 10 AWG Solar Cable Set, Panel to Controller (RS-30101) | 1 |
| 10 ft 10 AWG Battery Cable Set, Controller to Battery (RS-1010) | 1 |
| System | |
| Total Solar Power | 200W |
| System Voltage | 12V DC |
| Battery Storage | 1.28kWh (1,280Wh) |
| Estimated Daily Energy | About 0.7kWh per day under 4 peak sun hours |
| Inverter | Not included |
| Optional Battery Fuse | 30A ANL, controller to battery (not included) |
| Solar Panel | |
| Panel Model | MEGA 200 (RS-M200) |
| Maximum Power (Pmax) | 200W |
| Power Tolerance | 0 to +5W |
| Maximum Power Voltage (Vmp) | 18.4V |
| Maximum Power Current (Imp) | 10.9A |
| Open Circuit Voltage (Voc) | 21.8V |
| Short Circuit Current (Isc) | 11.6A |
| Maximum System Voltage | 1000VDC |
| Maximum Series Fuse Rating | 15A |
| Module Efficiency | 20.2% |
| Cell Type | N-Type TOPCon, 30 cells |
| Glass | 3.2 mm (0.13 in) AR coated tempered glass |
| Frame | Anodized aluminum alloy |
| Junction Box | IP67 |
| Panel Cables | 12 AWG (4.0 mm²), 35.4 in (900 mm) |
| Mounting Holes | 14 pre-drilled |
| Mechanical Load | 5400 Pa positive, 2400 Pa negative |
| Temperature Range | -40°F to 185°F |
| Dimensions | 58.7 x 26.8 x 1.2 in (1490 x 680 x 30 mm) |
| Weight | 24.0 lb (10.9 kg) |
| Charge Controller | |
| Controller Model | BRAVO 30 (RS-MPPT30PB) |
| Rated Charge Current | 30A |
| Maximum PV Input Current | 30A |
| System Voltage | 12V/24V auto-detect |
| Maximum PV Open Circuit Voltage | 100VDC |
| MPPT Voltage Range | 15-72VDC |
| Recommended Solar Power | 500W (12V) / 1,000W (24V) |
| MPPT Tracking Efficiency | Up to 99.5% |
| Maximum Conversion Efficiency | 98% |
| Battery Profiles | GEL, AGM, WET, Crystal, Calcium, LiFePO4, LTO, LCO, Custom |
| Display | LCD with LED indicators |
| Bluetooth | Built-in (RICH SOLAR app) |
| Optional Accessories | Remote meter, battery temperature sensor |
| Protections | Over-voltage, reverse polarity, short circuit, over-temperature |
| Protection Rating | IP43 (PCBA), IP22 (connectors) |
| Mounting | Indoor, vertical surface |
| Certifications | ETL, FCC, CE, RoHS |
| Dimensions | 7.0 x 5.5 x 2.9 in |
| Weight | 1.8 lb |
| Battery | |
| Battery Model | ALPHA 1 (RS-B121S) |
| Chemistry | LiFePO4 |
| Nominal Voltage | 12.8V |
| Capacity | 100Ah |
| Energy | 1,280Wh |
| Cycle Life | 5,000+ cycles (80% DoD) |
| Maximum Charge Current | 100A |
| Recommended Charge Current | 50A (0.5C) |
| Maximum Continuous Discharge Current | 100A |
| Maximum Charge Voltage | 14.4V |
| Recommended Charge Voltage | 14.2V |
| Discharge Cutoff Voltage | 10.0V |
| Charge Temperature | 32°F to 131°F (0°C to 55°C) |
| Discharge Temperature | -4°F to 140°F (-20°C to 60°C) |
| Internal Heating | 100W, on at 41°F or below while charging, off at 50°F |
| Bluetooth | Yes (RICH SOLAR app) |
| Parallel Expansion | Up to 4 units (same model, within 1V of each other) |
| BMS Protection | Over-charge, over-discharge, over-current, short circuit, high/low temperature, cell balancing |
| Ingress Protection | IP65 |
| Housing | UL94 V-0 flame-retardant plastic |
| Terminals | M8 |
| Dimensions | 10.2 x 6.6 x 8.3 in (Group 24 size) |
| Weight | 24.0 lb |
| Certifications | UN 38.3, MSDS |
| Warranty | |
| Solar Panel | 25-year power output, 10-year workmanship |
| Battery | 5 years |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
