The Rich Solar Ground Mount for MEGA 200, 220 and 250 Panels Holds Up to Four Panels on a Steel Frame You Can Tilt From 18° to 45°
The Rich Solar RS-GM02 is a steel ground mount for one to four MEGA 200, MEGA 220 or MEGA 250 solar panels. The frame measures 3300 x 1400 mm (10.83 x 4.59 ft) and sets the panels at any angle from 18° to 45°.
It's built for off-grid systems on the ground or on flat surfaces such as garages, sheds and flat roofs. The kit comes with the legs, rails, clamps, bolts and concrete anchors.
Rich Solar Ground Mount for MEGA 200, 220 and 250 Panels Features
Set the Tilt From 18° to 45°
Two leg assemblies hold the panel rails. Each has a 300 mm front leg, a 1400 mm beam and a rear leg built from a 750 mm section and two 250 mm extensions. You set the angle when you bolt the beams to the legs, so you can match the tilt to your site.
High-Strength Steel Rated for Wind and Snow
Rich Solar rates the steel frame for wind speeds up to 60 m/s and snow loads up to 1.05 kN/m². A diagonal strengthening pole bolts between the rear legs to brace the structure.
Room for One to Four Panels
Each panel rail is made from three 1100 mm U62 sections joined with splice kits, for a 3300 mm run. Six mid clamps and four end clamps hold up to four panels in a row, and each mid clamp set includes a ground clip.
Pre-Drilled Parts and Concrete Anchors
The components are pre-drilled and the hardware is included. Eight M12 x 150 mm expansion bolts anchor the feet to concrete, and the manual covers assembly in six steps.
Real-World Applications
Ground-mounted off-grid arrays. Set up to four MEGA 200, MEGA 220 or MEGA 250 panels on concrete footings in an open spot.
Sheds, garages and flat roofs. Tilt the array toward the sun on a flat roof instead of laying the panels flat.
Practical Comparison
RS-GM02 Versus a Flush Mount
A flush mount holds panels parallel to the surface under them. The RS-GM02 stands them on their own legs at 18° to 45°, so you choose the angle. It needs more open space and solid footings in return.
RS-GM02 Versus the RS-GM01
Both share the steel design, the 18° to 45° tilt range and the same wind and snow ratings. The RS-GM02 measures 3300 x 1400 mm for MEGA 200, MEGA 220 and MEGA 250 panels. The RS-GM01 measures 3000 x 950 mm for MEGA 100, MEGA 100 SLIM and MEGA 150 panels.
Buyer Guidance
Plan the Footings First
The manual starts with marking leg positions from your panel size and layout, then pouring concrete footings where needed. Concrete isn't included. Follow local building codes and use fall protection when working at height. For custom leg spacing, the manual calls for a check based on panel size, site wind and snow loads and tilt angle, and the Outbound Power team can help. You'll need a tape measure, chalk line, Allen key, open-end spanner, gloves and safety glasses.
This May Be A Good Fit If
- You have one to four MEGA 200, MEGA 220 or MEGA 250 panels
- You want a tilt between 18° and 45°
- You're mounting on the ground or a flat roof
- You can anchor the feet to concrete
Common Questions
Which Panels Fit the RS-GM02?
Rich Solar lists the MEGA 200, MEGA 220 and MEGA 250. For MEGA 100, MEGA 100 SLIM or MEGA 150 panels, choose the RS-GM01.
How Many Panels Does It Hold?
One to four, side by side on the two rails.
Are Anchor Bolts Included?
Yes. Eight M12 x 150 mm expansion bolts come in the kit for anchoring to concrete.
What's Included
- 2 x 1400mm Beams
- 2 x 300mm Front Legs
- 2 x 750mm Rear Legs
- 4 x 250mm Rear Legs
- 4 x U62 Rear Leg Splice Kits
- 6 x Adapters
- 2 x Base Rear Feet
- 1 x U41 Strengthening Pole
- 6 x 1100mm U62 Rails
- 4 x U62 Rail Splice Kits
- 6 x U-Mid Clamp Sets With Ground Clips
- 4 x U-End Clamp Sets
- 8 x M12 x 150mm Expansion Bolts
- 6 x M10 x 70 Bolt Sets
- 1 x Set of M10 x 30 Bolts, Washers and Nuts
- 6 x M10 x 30 Bolt Sets With Plastic Steel Nuts
A Solid, Adjustable Base for Larger MEGA Panels
The Rich Solar Ground Mount for MEGA 200, 220 and 250 Panels gives up to four panels a steel frame, an 18° to 45° tilt range and the hardware to anchor it to concrete. If you have questions about footings, fit or layout, the Outbound Power team is happy to help.
Rich Solar Adjustable Ground Mount for MEGA 200, MEGA 220 and MEGA 250 Panels 1-4 Panels Specifications
|
| Model |
RS-GM02 |
| Fit |
| Compatible Panels |
Rich Solar MEGA 200, MEGA 220, MEGA 250 |
| Panels per Mount |
1 to 4 |
| Panel Width Range |
25.6-31.5 in (650-800 mm) |
| Physical |
| Material |
High-Strength Steel |
| Dimensions (L x W) |
3300 x 1400 mm (10.83 x 4.59 ft) |
| Tilt Angle |
18°-45° |
| Panel Rails |
6 x U62 rail 1100 mm, joined with 4 splice kits |
| Leg Assemblies |
2 |
| Beam Length |
1400 mm |
| Front Leg |
300 mm |
| Rear Leg |
750 mm + 2 x 250 mm extensions |
| Clamps |
6 mid clamps, 4 end clamps |
| Performance |
| Maximum Wind Resistance |
60 m/s |
| Maximum Snow Load |
1.05 kN/m² |
| Installation |
| Anchors |
8 x M12 x 150 mm expansion bolts (concrete) |
| Leg and Beam Bolts |
M10 x 70 |
| Rail, Splice and Brace Bolts |
M10 x 30 |
| End Clamp Bolts |
M8 x 35 |
| Mid Clamp Bolts |
M8 x 45 |
| Tools Required |
Tape measure, chalk line, Allen key, open-end spanner, gloves, safety glasses |
| Installation Steps |
6 |
Rich Solar Adjustable Ground Mount for MEGA 200, MEGA 220 and MEGA 250 Panels 1-4 Panels Manuals and Documents
Rich Solar RS-GM01, RS-GM02 and RS-GM03 Ground Mount Manual
Rich Solar RS-GM Series Ground Mount Specification Sheet