Found the same price or less? Just ask & we'll beat it.
The Rich Solar BRAVO AIR 30 (RS-PWM30PF) is a 30A PWM solar charge controller for 12V battery systems that installs flush with a wall or cabinet panel. It combines PWM and MOSFET charging with four-stage charge control, built-in Bluetooth monitoring through the RICH SOLAR app, and an LCD with LED indicators on the front panel.
The BRAVO AIR 30 supports GEL, AGM, flooded, calcium, LTO and LiFePO4 batteries, can automatically reactivate a protected LiFePO4 battery, and is certified to UL 1741, FCC, CE, EMC and RoHS standards. It accepts up to 25V of solar input, which suits 12V panels wired in parallel on RVs, trailers, campers, vans and boats.
PWM and MOSFET charging delivers efficient, stable charging through bulk, absorption, equalization and float stages, so each battery type gets the charge it needs as it fills.
Connect to the RICH SOLAR app to check charging status and battery information from your phone, without adding a separate module. The LCD and LED indicators show real-time status at the controller too.
Charging settings cover GEL, AGM, flooded, calcium, LTO and LiFePO4 batteries. Automatic BMS activation can wake a LiFePO4 battery whose BMS has shut it off for protection.
The controller adjusts charging voltage based on ambient temperature, and it supports an external battery temperature sensor (BTS) for more accurate compensation.
The BRAVO AIR 30 installs flush with the surrounding panel for a clean, finished look. It is designed for vertical wall mounting and accepts up to #8 AWG stranded wire at the power terminals.
Electronic protection guards against reverse polarity, short circuit, over-temperature, over-voltage and overload, with over-temperature protection during charging at 185°F. The controller is certified to UL 1741, FCC, CE, EMC and RoHS standards.
RVs and travel trailers. Replace a dated wall controller with a flush-mount unit you can also check from your phone.
Camper vans. Mount it in a cabinet face and monitor roof solar from the driver's seat.
Boats. Charge a 12V house battery from deck or bimini panels with a tidy installation.
Truck campers and small cabins. Manage up to 30A of 12V panel current for lights, fans and electronics.
Versus the Rich Solar RS-PWM30F. Both are 30A, 12V flush-mount PWM controllers with lithium BMS activation and UL 1741 certification. The BRAVO AIR 30 adds built-in Bluetooth app monitoring and LTO and LiFePO4 profiles.
Versus an MPPT controller. An MPPT controller such as the Rich Solar BRAVO 30 accepts higher input voltage and converts surplus voltage into current. The BRAVO AIR 30 is simpler and works well with 12V panels wired in parallel.
Versus a surface-mount controller. Surface-mount controllers sit on the wall and expose their wiring. The BRAVO AIR 30 sits flush for a cleaner look in living spaces.
This may be a good fit if
No. Bluetooth is built in. Use the RICH SOLAR app to monitor charging status and battery information.
No. Rich Solar designed the BRAVO AIR 30 for 12V battery systems.
Not with typical 12V panels. The maximum solar input is 25V open circuit, so wire 12V panels in parallel.
Yes. Automatic BMS activation can reactivate a protected LiFePO4 battery.
The Rich Solar BRAVO AIR 30 gives 12V RVs, vans and boats four-stage PWM charging, built-in Bluetooth and broad lithium support in a clean flush-mount design. At Outbound Power, we help customers match controllers to their panels, batteries and wiring. If you have questions, our team is happy to help.
Rich Solar BRAVO AIR 30 Specifications |
|
|---|---|
| Model | BRAVO AIR 30 (RS-PWM30PF) |
| Controller Type | PWM with MOSFET, 4-stage (bulk, absorption, equalization, float) |
| System Voltage | 12V |
| Rated Solar Panel Current | 30A max |
| Maximum Solar Array Voltage (No Load) | 25V DC |
| Lowest Operating Voltage (Solar or Battery Side) | 8V DC |
| Standby Current at Night | 10mA max |
| Maximum Voltage Drop (Solar to Battery) | 0.25V DC |
| Battery Types | GEL, AGM, flooded, calcium, LTO, LiFePO4 |
| Lithium Support | Automatic BMS activation for LiFePO4 |
| Temperature Compensation | Automatic, external BTS supported |
| Monitoring | Built-in Bluetooth (RICH SOLAR app), LCD with LED indicators |
| Protection | Reverse polarity, short circuit, over-temperature, over-voltage, overload |
| Over-Temperature Protection (Charging) | 185°F (85°C) |
| Grounding | Positive ground |
| Operating Temperature | -13°F to 122°F (-25°C to 50°C) |
| Storage Temperature | -40°F to 185°F (-40°C to 85°C) |
| Operating Humidity | 0 to 85% RH |
| Mounting | Flush mount, vertical wall mounting |
| Power Terminal Wire Size | Up to #8 AWG stranded |
| Power Terminal Torque | 6.2 to 7.1 in-lb (0.7 to 0.8 N·m) |
| Housing | PC plastic |
| IP Grade | IP22 |
| Certifications | UL 1741, FCC, CE, EMC, RoHS |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder
