Rich Solar Dual Panel Adjustable Pole Mount Bracket Kit | 100-250 Watt Panels

The Rich Solar Dual Panel Adjustable Pole Mount Bracket Kit Holds Two 100 to 250 Watt Panels on a Round Pole Up to 5 Inches Wide

The Rich Solar RS-SM01D is an aluminum side-of-pole mount for two solar panels, each rated 100 to 250 watts. Stainless steel band clamps hold it to round poles up to 5 inches in diameter, and you can set the panel angle within Rich Solar's 25° to 90° range.

It suits off-grid systems at cabins and remote properties. The frame is anodized 6005-T5 aluminum alloy with 304 stainless steel fasteners and pole clamps, and the kit weighs 24.9 lb.

Rich Solar Dual Panel Adjustable Pole Mount Bracket Kit Features

Two Panels on One Pole

Long inclined beams, 64.96 in (1650 mm) each, carry two panels one above the other. Each panel bolts down with four module bolts, and the kit includes eight.

Angle Adjustment From 25° to 90°

You set the angle by changing the spacing between the upper and lower cross beams on the pole. The manual measures it as the angle between the panel and the pole, and it lists the dual-panel spacing for each setting, from 27.99 in (711 mm) at 90° to 78.39 in (1991 mm) at 30°.

Fits Panels From 100 to 250 Watts

The inclined beams bolt to the cross beams at holes marked for 100, 150, 200 and 250 watt panels. The manual sizes these from 39.0 x 21.3 in to 60.6 x 29.9 in.

Rated for Winds Up to 120 MPH

The 36.6 in cross beams, inclined beams and braces form a reinforced triangle. Rich Solar rates the assembly for wind speeds up to 120 mph.

Aluminum Frame With Stainless Hardware

The aluminum alloy keeps the kit light to carry and install, and the anodized finish adds outdoor protection. The inclined beams and braces come pre-assembled with their connectors, and the mounting holes are pre-drilled.

Real-World Applications

Off-grid cabins. Put two panels on a pole near a cabin or outbuilding instead of on the roof.

Remote properties. Mount a two-panel array at an outdoor site with no building to hold it.

Practical Comparison

RS-SM01D Versus the RS-SM01S

Both use 36.6 in cross beams, fit 100 to 250 watt panels, adjust from 25° to 90° and carry the 120 mph wind rating. The RS-SM01D holds two panels, measures 66.9 x 7.9 x 7.5 in and weighs 24.9 lb. The single-panel RS-SM01S measures 37.0 x 6.7 x 7.1 in and weighs 16.5 lb.

Pole Mount Versus a Roof Mount

A roof mount ties the panels to the roof's position and pitch. A pole mount lets you place and angle the panels where you want, with no holes in the roof.

Buyer Guidance

Check Your Pole and Panels

Rich Solar specifies round poles up to 5 in in diameter. The pole isn't included. Each cross beam takes two band clamps, and the dual kit's cross beam spacing runs from 27.99 in to 78.39 in or more depending on the angle, so plan enough pole height. Compare your panels with the sizes in the manual's table before you order.

Tools and Torque

The manual lists an electric hand drill, a spanner for M6, M8 and M10 bolts, a spirit level and a measuring tape. Tighten M6 bolts to 44-53 lbf·in (5-6 N·m) and M10 bolts to 159-177 lbf·in (18-20 N·m).

This May Be A Good Fit If

• You have two panels rated 100 to 250 watts each
• You have a round pole up to 5 inches in diameter
• You want an adjustable angle and a 120 mph wind rating
• Your system is off-grid or at a remote site

Common Questions

How Is the Angle Measured?

The manual measures the 25° to 90° range between the panel and the pole. You set it with the cross beam spacing from the manual's dual-panel column.

Is the Pole Included?

No. The kit includes the beams, braces, connectors, band clamps and bolts. You supply a round pole up to 5 inches in diameter.

Can I Mount Just One Panel?

This kit is built for two panels. For one, choose the RS-SM01S.

What's Included

• 4 x Stainless Steel Band Clamps
• 2 x Clamp Connectors
• 2 x Inclined Beam Connectors
• 2 x Brace Connectors
• 2 x Cross Beams
• 2 x Braces
• 2 x Inclined Beams
• 6 x M10 x 70 Connector Bolt Sets
• 14 x M10 x 25 Connector Bolt Sets
• 8 x M6 x 20 Module Bolt Sets

Two Panels, One Pole

The Rich Solar Dual Panel Adjustable Pole Mount Bracket Kit puts two 100 to 250 watt panels on a round pole with an adjustable angle, aluminum construction and a 120 mph wind rating. If you'd like help checking your pole, panel sizes or angle settings, the Outbound Power team is happy to help.

Rich Solar Dual Panel Adjustable Pole Mount Bracket Kit 100-250 Watt Panels Manuals and Documents

Rich Solar RS-SM01S and RS-SM01D Pole Mount Installation Manual

Rich Solar RS-SM01S and RS-SM01D Pole Mount Specification Sheet