Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The Rich Solar RS-RM02 is a wired remote panel for Rich Solar's NOVA SWITCH and NOVA SUPERCHARGER series inverters. From the wall, you can turn the inverter on or to standby, switch operating modes and adjust settings. A high-definition backlit LCD shows voltage, load and system status in real time.
A 6-conductor cable with RJ12 plug-and-play connections links it to the inverter, and the flame-retardant ABS housing mounts flush in the wall.
The power button turns the inverter on or to standby when the inverter's own power button is off. Hold the setting button for three seconds to enter settings mode, then scroll, change and confirm. A change can take about a minute to reach the inverter.
In battery mode, the screens show battery voltage, AC load, and output voltage and frequency. In grid mode, they add input voltage, input current and load current. A four-bar battery icon shows remaining charge in 25% steps, and a load bar shows how much inverter capacity is in use. Any button press turns on the backlight for 60 seconds.
Green LEDs show grid mode, when shore power passes through to the loads, and battery mode, when the inverter runs loads from the battery. Solid red marks a fault with an error code. Flashing red marks a warning with an error code and an audible alarm.
The panel needs a 4.33 x 2.32 inch (110 x 59 mm) cut-out and more than 1.97 inches (50 mm) of recess depth. Its four mounting holes sit 4.69 inches (119 mm) apart side to side and 2.76 inches (70 mm) apart top to bottom.
RVs. Mount the panel in the living area to see when shore power is passing through, check battery voltage and put the inverter in standby.
Off-grid and hybrid systems. Control and monitor an inverter in a utility room or equipment closet from a more convenient wall.
Rich Solar's specification sheet covers both remotes. They share the same display, indicators, control functions, housing, flush wall mount and RJ12 connection. The RS-RM03 adds Bluetooth for monitoring and adjusting settings in the RICH SOLAR app. Choose the RS-RM02 if a wall panel is all you need.
Rich Solar recommends a mounting height of about 59 inches (1.5 m), away from water and heat. Use the backplate as a template and keep the wall cavity clear of pipes, insulation and wiring. Mounting screws aren't included, so plan on four screws that suit your wall.
Connect the 6-conductor cable to the RJ12 ports on the inverter and the remote. Leave 4 to 6 inches (10 to 15 cm) of slack and secure it with zip ties to take strain off the ports.
Rich Solar lists the NOVA SWITCH and NOVA SUPERCHARGER series inverters.
No. Bluetooth and app control are only on the RS-RM03.
The remote's user guide covers the buttons, screens and installation. For the individual settings, it refers you to your NOVA inverter's owner's guide.
The Rich Solar RS-RM02 Inverter Remote Control gives your NOVA SWITCH or NOVA SUPERCHARGER inverter a flush wall panel with power control, settings access, live readings and fault alerts. If you have questions about fit or installation, the Outbound Power team is happy to help.
Rich Solar Inverter Remote Control With LCD for NOVA SWITCH and SUPERCHARGER RS-RM02 Specifications |
|
|---|---|
| Model | RS-RM02 |
| Compatibility | |
| Compatible Inverters | NOVA SWITCH and NOVA SUPERCHARGER series |
| Bluetooth | No (Bluetooth version is RS-RM03) |
| Display and Controls | |
| Display | HD backlit LCD |
| Monitoring | Power, voltage, load, battery status |
| Indicators | Dual-color LED, fault code, buzzer |
| Control Functions | ON/OFF, mode selection, settings |
| Buttons | ESC, scroll, setting, power |
| Backlight | On with any button press, off after 60 seconds idle |
| Connection | |
| Connection | RJ12 plug and play |
| Cable | 6-conductor communication cable kit |
| Physical | |
| Housing Material | Flame-retardant ABS |
| Mounting | Flush wall mount |
| Dimensions | 5.51 x 3.54 x 1.54 in (140 x 90 x 39 mm) |
| Cut-Out Size | 4.33 x 2.32 in (110 x 59 mm) |
| Minimum Recess Depth | 1.97 in (50 mm) |
| Mounting Hole Spacing | 4.69 x 2.76 in (119 x 70 mm) |
| Recommended Mounting Height | 59 in (1.5 m) |
| Package Dimensions | 8 x 7 x 3 in |
| Gross Weight | 2 lb |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
