The SunGold Power Wi-Fi Module for SG48200T Battery Puts Your Whole SG48200T System on Your Phone With One Module
The SunGold Power Wi-Fi Module for SG48200T Battery connects your SG48200T battery system to Wi-Fi so you can monitor it in SunGold's E-Power Go app. You can check state of charge, voltage, temperature and cycle count in real time.
One module covers the whole system, even with multiple battery packs. It is for SG48200T owners who want to keep an eye on their batteries from a phone.
SunGold Power Wi-Fi Module for SG48200T Battery Features
Battery Data on Your Phone
The module reports battery state of charge, voltage, temperature and cycle count. The app's battery view also shows current, power, rated capacity and total discharging, so you can see how the bank is doing.
One Module for Multiple Battery Packs
Only one Wi-Fi module is needed for the whole system, even when it has multiple battery packs. That keeps hardware and setup to a single module.
E-Power Go App for Android and iPhone
The E-Power Go app is on Google Play and the App Store. SunGold recommends a phone running Android 10.0, iOS 13.0 or later, with internet access and WLAN support.
Guided Wi-Fi Setup
In the app, you add the module by scanning the SN code printed on the communication box or by entering the SN code and check code. Then you enter your Wi-Fi password, and the app connects to the device over Bluetooth to finish setup, which SunGold says takes 10 to 60 seconds.
History Graphs and Alarms
The Statistics screen graphs voltage, current, state of charge and temperature over time, by system or by cluster. Active alarms appear on the Event screen, where you can tap for details.
Station Sharing and Firmware Updates
You can share your station with others, who get view-only access. When the module is connected over Wi-Fi, firmware updates install through the app.
Real-World Applications
Home backup. Check how much charge is left before and during an outage.
Off-grid cabins. Watch battery state while you are away from the property.
Installer support. Share a view-only station with your installer or a family member.
Multi-pack banks. Monitor a system with several SG48200T packs through one module.
How It Compares to Common Alternatives
Versus a module for each battery. You do not need one module per pack. One module covers the whole SG48200T system.
Versus checking at the battery. Without Wi-Fi, you have to be at the battery to see its status. The module brings that data to your phone.
Is This Wi-Fi Module the Right Fit
-
Battery model. It is made for the SG48200T battery.
-
Phone. SunGold recommends Android 10.0, iOS 13.0 or later, with internet access and WLAN support.
-
Wi-Fi network. You need a Wi-Fi network at the battery location and its password.
-
Update rate. SunGold lists a data update time of 5 minutes in the app.
This may be a good fit if
- You own an SG48200T battery system
- You want to check your batteries from your phone
- You have several packs and want one module for all of them
- You want to share a view-only station with someone else
Common Questions
How Many Modules Do I Need?
One. A single module covers the whole system, even with multiple battery packs.
What Can I See in the App?
State of charge, voltage, temperature and cycle count, plus current, power, rated capacity, total discharging and history graphs.
Which Phones Work With the App?
E-Power Go is on Google Play and the App Store. SunGold recommends Android 10.0, iOS 13.0 or later.
Can Someone Else View My System?
Yes. You can share your station, and visitors who add it by scanning its QR code can view data but not make changes.
What's Included
- 1 x SunGold Power Wi-Fi Module for SG48200T Battery
Your SG48200T System at a Glance
The SunGold Power Wi-Fi Module for SG48200T Battery brings state of charge, voltage, temperature and cycle count for your whole SG48200T system into the E-Power Go app with one module. At Outbound Power, we help customers set up and monitor home battery systems. If you have questions, our team is happy to help.
SunGold Power Wi-Fi Module for SG48200T Battery Specifications
|
| Brand |
SunGold Power |
| Model |
SG48200T-WIFI |
| Product Type |
Battery Wi-Fi Module |
| Compatible Battery |
SG48200T |
| Modules per System |
1 (supports multiple battery packs) |
| Monitored Data |
State of charge, voltage, temperature, cycle count |
| App |
E-Power Go (Google Play, App Store) |
| Recommended Phone OS |
Android 10.0, iOS 13.0 or later |
| Setup |
Scan or enter the SN code, then enter Wi-Fi details |
| Data Update Time |
5 minutes |
SunGold Power SG48200T Wi-Fi Module App Manual