Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The AIMS Power 1000 Watt 12 Volt Pure Sine Inverter Kit pairs the PWRI100012120S pure sine inverter with an ANL fuse kit, a set of 11 foot 6 AWG cables and an on/off remote switch. The inverter turns 12V DC battery power into 120V AC at 60 Hz, with 1000 watts of continuous power, 2000 watts of surge and up to 8 AC amps.
It's built for anyone who wants mobile or backup AC power without sourcing each part on their own. AIMS lists it for work trucks, RVs, vans, buses and battery backup systems, and the inverter manual adds boats. The cables are precision cut and professionally crimped, and the 100 amp fuse kit includes a 6 AWG jumper, so the main DC parts arrive ready to install.
The inverter puts out a pure sine wave with total harmonic distortion under 3%. AIMS says this waveform has the same quality as utility power and suits most devices, appliances and tools. It also reduces the noise produced while appliances run.
You get 1000 watts of continuous output and a 2000 watt surge rating for 40 milliseconds. A soft start feature raises the AC voltage gradually. AIMS suggests turning on the appliance before the inverter, especially for motors and other inductive loads.
The inverter's spec sheet calls for a 100 amp inline DC fuse and 6 AWG or larger cable. This kit includes the ANL100KITJ fuse kit with a 6 AWG jumper and the CBL11FT6AWG cable set, one red and one black cable, rated at 117 amps max. You don't have to work out the fuse size or cable gauge yourself.
The inverter has a remote port for an on/off remote switch, and the REMOTEHF remote comes in the kit. You can switch the inverter on and off from the remote as well as from the push button on the unit.
A buzzer warns you when battery voltage drops to 9.8V, and the inverter shuts down at 9.5V. It also shuts down above 16V input, on overload and above 149°F. The AC output shuts off on a short circuit and resets once the problem is fixed. LED power and protect indicators show its status.
The front panel has two 3-prong AC outlets and a USB port rated at 5V DC and 1A. The inverter is conformal coated to protect against moisture and corrosion, it's cooled by a thermally controlled fan, and it's ETL listed to UL 458 and CSA 22.2 No 107.1.
Work trucks. Run smaller tools, electronics and appliances from the truck's battery bank with fused, ready-made wiring.
RVs, vans and buses. Power small appliances and electronics on the road from a 12V house battery.
Boats. The manual lists boats among mobile uses. Connect the inverter's ground terminal to the boat's ground system and keep water away from the unit.
Battery backup. Keep sensitive devices running from a 12V battery bank when utility power goes out.
The PWRI100012120S inverter does not come with cables on its own. With this kit, the fuse kit, jumper, red and black cables and remote are already matched to the inverter's 100 amp fuse and 6 AWG cable recommendations, which saves you sizing and sourcing time.
AIMS says a pure sine inverter provides more capabilities than a modified sine inverter because its power is cleaner, and it reduces the noise appliances make. AIMS describes its pure sine line as ideal for sensitive equipment.
AIMS's manual divides watts by battery voltage and adds about 10% for the inverter's own use. A 1000W load on a 12V battery draws about 83.3 amps, or about 91.6 amps with that 10%. In AIMS's example, a 12V 200Ah battery at that load runs about 2.18 hours if fully depleted, which AIMS does not recommend, since deep cycle batteries last longer when only depleted to 50%. Also plan for start-up demand of 3 to 5 times an appliance's running watts.
The inverter is for negative ground electrical systems only. Mount it right side up on a stable surface with all four mounting screws, allow 12 inches of space around it and keep water off the unit. AIMS lists an ambient range of 32 to 104°F, with 50 to 77°F preferred. Connect the ground terminal to the vehicle chassis, the boat's ground system or earth, and do not reverse polarity.
The buzzer sounds intermittently when input drops below 9.8V. Below 9.5V the inverter shuts down, the green light goes off and the red light comes on. Recharge the battery before you use it again.
The kit includes 11 foot 6 AWG cables, one red and one black, precision cut and professionally crimped. AIMS rates them at 117 amps max.
Yes. The USB port supplies 5V DC at up to 1A. Check that your device doesn't need more than that.
AIMS says the inverter doesn't draw battery current when it's switched off. With the switch on and no load, it draws about 0.4 amps. AIMS still recommends disconnecting it from the battery when you won't use it for a long time.
AIMS lists a 2 year warranty for this kit, and the inverter manual covers the inverter with a full 2 year warranty from the date of purchase.
The AIMS Power 1000 Watt 12 Volt Pure Sine Inverter Kit brings together a 1000 watt pure sine inverter, a 100 amp ANL fuse kit, 11 foot 6 AWG cables and an on/off remote, all matched to the inverter's own wiring recommendations. If you'd like help sizing your battery bank or planning the install, the Outbound Power team is happy to help.
AIMS Power 1000 Watt 12 Volt Pure Sine Inverter Kit With Fuse, Cables and Remote Specifications |
|
|---|---|
| Kit Contents | |
| Inverter | PWRI100012120S 1000 Watt 12 Volt Pure Sine Power Inverter |
| Fuse Kit | ANL100KITJ, 100 amp ANL fuse kit with 6 AWG jumper |
| Cable Set | CBL11FT6AWG, 11 ft 6 AWG, 1 red and 1 black |
| Remote | REMOTEHF on/off remote switch |
| Kit Weight | 12 lbs |
| Inverter | |
| Continuous Output Power | 1000W |
| Surge Power | 2000W for 40 milliseconds |
| DC Input Voltage | 12V (10-16V) |
| Output Voltage | 120 VAC +/- 10% |
| Output Frequency | 60 Hz |
| Output Waveform | Pure sine wave |
| THD | Less than 3% |
| AC Output Current | 8 A |
| DC Input Current | 83 A |
| Efficiency | Over 90% |
| 1/3 Load Efficiency | 95% |
| No Load Current | 0.4 A |
| AC Outlets | Dual 3-prong outlets |
| USB Output | 5 VDC, max 1A |
| Remote Switch Port | Yes, for REMOTEHF |
| Cooling | Thermally controlled fan, starts at about 104°F case temperature |
| Marine Protection | Conformal coated to protect against moisture and corrosion |
| Protection | |
| Battery Low Alarm | DC 9.8 +/- 0.3V |
| Battery Low Shutdown | DC 9.5 +/- 0.5V |
| Input Over Voltage Shutdown | 16 +/- 0.5 VDC |
| Over Temperature Protection | 149°F +/- 8°F |
| Overload Protection | Shuts down above rated power |
| Short Circuit Protection | AC output, automatic reset |
| Internal Fuse | Internal blade fuse protection |
| Electrical System | Negative ground only |
| Fuse Kit | |
| Fuse Rating | 100 amp |
| Jumper | 6 AWG |
| Cables | |
| Cable Gauge | 6 AWG |
| Cable Length | 11 ft |
| Cable Colors | 1 red and 1 black |
| Max Cable Current | 117 A |
| Ends | Precision cut and professionally crimped |
| Installation and Physical | |
| Inline DC Fuse | 100 amp |
| Recommended Cable Size | 6 AWG or larger |
| Operating Temperature | 32-113°F (automatic recovery/shutdown) |
| Recommended Ambient Temperature | 32-104°F, preferred 50-77°F |
| Clearance | 12 in around the inverter |
| Mounting Hole Location | 3 5/8 in center to center on width side |
| Inverter Dimensions (L x W x H) | 11.65 x 5.5 x 2.8 in |
| Inverter Weight | 5.2 lb |
| Certifications and Warranty | |
| Certification | ETL listed to UL 458 and CSA 22.2 No 107.1 |
| Warranty | 2 years |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
