AIMS Power 1250 Watt 12 Volt Modified Sine Power Inverter | With Volt And Watt Meters
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The AIMS Power 1250 Watt 12 Volt Modified Sine Power Inverter With Volt and Watt Meters converts 12 volt DC battery power into 120 volt AC electricity for tools, appliances, and essential equipment, and it shows you exactly what is going on with front-panel battery voltage and wattage meters. Designed to run from most standard 12 volt vehicle electrical systems without costly alternator or wiring upgrades, it is a strong fit for work trucks, fleet and service vehicles, mobile businesses, RVs, boats, and off-grid or backup power systems.
With 1250 watts of continuous output and 3100 watts of peak surge capability, this inverter handles small tools, pumps, motors, and everyday appliances, with headroom for startup loads.
A volt meter shows your battery voltage at a glance, and a watt meter shows how much power you are drawing. That real-time feedback helps you manage loads, protect your battery, and avoid surprises halfway through a job.
Two three-prong AC receptacles come with protective rubber covers to help keep dust and debris out when they are not in use, a practical touch for trucks and job sites.
The inverter is pre-wired for a remote on/off switch through an RJ11 port, so you can control it from the cab or a panel. A pre-slotted mounting plate makes installation straightforward.
Dual cooling fans run only as needed, and the aluminum case is designed for optimal cooling. Efficiency reaches 95% at one-third load and 90% at full load, with a no-load draw under 0.5 amps.
AIMS Power lists a broad range of uses for this inverter:
Because it runs quietly with zero emissions, it also creates a better customer experience than a noisy generator at curbside or indoor jobs.
Versus a basic 1250 watt inverter. This model adds volt and watt meters, covered outlets, a remote port, dual fans, and a higher 3100 watt surge rating, which are worthwhile upgrades for daily work use.
Versus a portable generator. A generator runs on fuel and must operate outdoors. This inverter draws on your vehicle or battery bank silently and without exhaust.
Versus pure sine wave inverters. Modified sine wave power keeps costs down and handles many tools and appliances. For sensitive electronics, AIMS Power recommends its pure sine wave options.
This may be a good fit if
The front panel has a volt meter that monitors your battery voltage and a watt meter that monitors your power draw.
Yes. The inverter is pre-wired for a remote on/off switch through an RJ11 port.
AIMS Power designed it to run from most standard 12 volt vehicle systems without costly alternator or wiring upgrades. Use proper cables and a 150 amp inline fuse.
AIMS Power backs this inverter with a 2 year warranty and free lifetime technical support.
The AIMS Power 1250 Watt 12 Volt Modified Sine Power Inverter With Volt and Watt Meters gives working vehicles and off-grid setups dependable AC power plus the information you need to use it wisely. At Outbound Power, we help customers design mobile and backup power systems that hold up to real-world use. If you need help choosing cables, fusing, or batteries for this inverter, our team is ready to help.
AIMS Power 1250 Watt 12 Volt Modified Sine Power Inverter Specifications |
|
|---|---|
| Continuous Output Power | 1250 Watts (Use 150 Amp Inline Fuse) |
| Surge Power Capability (Peak Power) | 3100 Watts |
| DC Input / Operating Voltage | 10–15 Volts |
| Output Voltage | 120 Volts AC |
| Output Waveform | Modified Sine Wave |
| Output Frequency | 60 Hz |
| AC Outlets | 2 x Type 2 (3-Prong) Receptacles With Protective Rubber Covers |
| Meters | Front Panel Volt Meter and Watt Meter |
| Full Load Efficiency | 90% |
| 1/3 Load Efficiency | 95% |
| No Load Current | <0.5 Amps |
| Battery Low Voltage Alarm | 10.5 ±0.5 Volts |
| Battery Low Voltage Shutdown | 10.0 ±0.5 Volts |
| Low Input Voltage Shutdown | 10V |
| High Input Voltage Protection | 15V to 17V |
| No Load Minimum Operating Temperature | -15°C (5°F) |
| Full Load Maximum Operating Temperature | 55 ±5°C (Automatic Shutdown) |
| Cooling | Dual Thermally Controlled Fans, Aluminum Case |
| Remote Port | RJ11, Pre-Wired for Remote On/Off Switch |
| Protections | Over Temperature, Overload, AC Output Short Circuit, Internal Fuse, Auto Reset on Most Faults |
| Other Features | Isolated Ground Neutral, Green/Red Status LED, On/Off Switch, Pre-Slotted Mounting Plate |
| Product Size (L × W × H) | 11.25" × 8.25" × 3" |
| Weight | 5 lbs |
| Warranty | 2 Years, Plus Lifetime Tech Support |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder