Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The AIMS Power 2000 Watt 12 Volt Pure Sine Inverter Kit pairs the PWRI200012120S pure sine inverter with an ANL fuse kit, a set of 11 foot 1/0 AWG cables and an on/off remote switch. The inverter changes 12V DC battery power into 120V AC at 60 Hz, with 2000 watts of continuous power, 4000 watts of surge and up to 16 AC amps.
It's for anyone who needs more AC power from a 12V battery bank without hunting down each install part. AIMS lists it for work trucks, RVs, vans, buses and battery backup systems, and the inverter manual adds boats. The heavy duty cables are lugged on both ends, precision cut and professionally crimped, and the 200 amp fuse kit comes with a 1/0 AWG jumper.
The pure sine wave output has total harmonic distortion under 3%. AIMS says it has the same quality as utility power and suits most devices, appliances and tools, and that it reduces the noise produced while appliances run.
The inverter delivers 2000 watts continuously and surges to 4000 watts for 40 milliseconds. Soft start technology raises the AC voltage gradually. AIMS recommends turning the appliance on before the inverter, especially for motors and inductive loads.
The inverter's spec sheet recommends a 200 amp inline DC fuse and 2 AWG or larger DC cable. This kit includes the ANL200KITJ fuse kit with a 200 amp fuse and 1/0 AWG jumper, plus the CBL11FT1/0 set of 11 foot 1/0 AWG cables lugged on both ends.
AC power comes from a dual GFCI outlet you can reset, and a USB port supplies 5V DC at up to 2.1A. If the GFCI trips, AIMS's troubleshooting guide says to check the outlet and reset it, and to check the load, wiring and battery if it keeps tripping.
The inverter has a remote port for an on/off remote switch, and the REMOTEHF remote is part of the kit. You can turn the inverter on and off from the remote as well as from the push button on the front panel.
A buzzer warns you when input falls below 9.8V, and the inverter shuts down below 9.5V. It also shuts down above 16V input, on overload and above 149°F. The AC output shuts off on a short circuit and resets once the fault clears. The inverter is conformal coated against moisture and corrosion and ETL listed to UL 458 and CSA 22.2 No 107.1.
Work trucks. Power larger tools and electronics from the truck's 12V battery bank with fused 1/0 AWG wiring.
RVs and vans. Run larger appliances and electronics from a 12V house battery while you're on the road.
Boats. The manual lists boats among mobile uses. Tie the inverter's ground terminal into the boat's ground system and keep water away from the unit.
Battery backup. Keep appliances and electronics running from a 12V battery bank during a utility outage.
The PWRI200012120S inverter does not include cables on its own. This kit adds 1/0 AWG cables, a 200 amp fuse kit with jumper and the REMOTEHF remote, matched to the inverter's 200 amp fuse and 2 AWG or larger cable recommendations.
AIMS says a pure sine inverter provides more capabilities than a modified sine inverter because its power is cleaner. AIMS describes its pure sine line as ideal for sensitive equipment, so it's the type to choose when you're powering sensitive electronics.
AIMS's manual divides watts by battery voltage and adds about 10% for the inverter's own use. For example, a 1000W load on a 12V battery draws about 83.3 amps, or about 91.6 amps with the extra 10%. Use the same method for your own loads. Remember that motors and many appliances need 3 to 5 times their running watts at start-up. AIMS also notes that deep cycle batteries last longer when only depleted to 50% of capacity.
Use the inverter only with a negative ground electrical system. Mount it right side up on a stable surface using all four mounting screws, leave 12 inches of space around it for airflow and keep water away from it. AIMS lists an ambient range of 32 to 104°F, with 50 to 77°F preferred. Connect the ground terminal to the vehicle chassis, the boat's ground system or earth, and never reverse polarity.
The buzzer sounds intermittently when input drops below 9.8V. Below 9.5V the inverter shuts down, the green light goes off and the red light comes on. Recharge the battery before using it again.
The kit includes 11 foot 1/0 AWG cables lugged on both ends, precision cut and professionally crimped. That meets the inverter spec sheet's recommendation of 2 AWG or larger cable.
With the switch on and no load, the inverter draws about 0.9 amps. AIMS says it doesn't draw battery current when it's switched off, and recommends disconnecting it from the battery when you won't use it for a long time.
The inverter measures 17 1/8 x 9 7/16 x 3.8 inches, and its mounting holes are 8 11/16 inches apart, center to center, on the length side.
AIMS lists a 2 year warranty for this kit, and the inverter manual gives a full 2 year warranty from the date of purchase.
The AIMS Power 2000 Watt 12 Volt Pure Sine Inverter Kit combines a 2000 watt pure sine inverter with a GFCI outlet, a 200 amp ANL fuse kit, 11 foot 1/0 AWG cables and an on/off remote, all matched to the inverter's wiring recommendations. If you'd like help sizing your battery bank or planning the install, the Outbound Power team is happy to help.
AIMS Power 2000 Watt 12 Volt Pure Sine Inverter Kit With Fuse, Cables and Remote Specifications |
|
|---|---|
| Kit Contents | |
| Inverter | PWRI200012120S 2000 Watt 12 Volt Pure Sine Power Inverter |
| Fuse Kit | ANL200KITJ, 200 amp ANL fuse kit with 1/0 AWG jumper |
| Cable Set | CBL11FT1/0, 11 ft 1/0 AWG, lugged on both ends |
| Remote | REMOTEHF on/off remote switch |
| Kit Weight | 19 lbs |
| Inverter | |
| Continuous Output Power | 2000W |
| Surge Power | 4000W for 40 milliseconds |
| DC Input Voltage | 12V (9.8-16V) |
| Output Voltage | 120 volts AC |
| Output Frequency | 60 Hz |
| Output Waveform | Pure sine wave |
| THD | Less than 3% |
| AC Output Current | 16 A |
| Efficiency | Over 90% |
| No Load Current | 0.9 A, switch on |
| AC Outlet | Dual GFCI outlet, resettable |
| USB Output | 5 VDC, max 2.1A |
| Remote Switch Port | Yes, for REMOTEHF |
| Cooling | Thermally controlled fan, starts at about 104°F case temperature |
| Marine Protection | Conformal coated to protect against moisture and corrosion |
| Protection | |
| Battery Low Alarm | DC 9.8 +/- 0.3V |
| Battery Low Shutdown | DC 9.5 +/- 0.5V |
| Input Over Voltage Shutdown | 16 +/- 0.5 VDC |
| Over Temperature Protection | 149°F +/- 8°F |
| Overload Protection | Shuts down above rated power |
| Short Circuit Protection | AC output, automatic reset |
| Electrical System | Negative ground only |
| Fuse Kit | |
| Fuse Rating | 200 amp |
| Jumper | 1/0 AWG |
| Cables | |
| Cable Gauge | 1/0 AWG |
| Cable Length | 11 ft |
| Ends | Lugged on both ends, precision cut and professionally crimped |
| Installation and Physical | |
| Inline DC Fuse | 200 amp recommended |
| Recommended DC Cable Size | 2 AWG or larger |
| Operating Temperature | 32-113°F +/- 8°F (automatic recovery/shutdown) |
| Recommended Ambient Temperature | 32-104°F, preferred 50-77°F |
| Clearance | 12 in around the inverter |
| Mounting Hole Location | 8 11/16 in center to center on length side |
| Inverter Dimensions (L x W x H) | 17 1/8 x 9 7/16 x 3.8 in |
| Inverter Weight | 12 lb |
| Certifications and Warranty | |
| Certification | ETL listed to UL 458 and CSA 22.2 No 107.1 |
| Warranty | 2 years |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
