Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The AIMS Power 10 AWG MC4 Compatible Lugged End PV Wire is a 30 foot solar cable with a factory-installed MC4 compatible connector on one end and a ring lug on the other. Pick a female or male connector to match the panel lead you're plugging into. The cable is 10 AWG tinned copper PV wire rated at 600 V with a 49.6A allowable current.
It's for solar owners and installers who want the panel end to plug in and the equipment end ready to bolt down, with no crimping on either end. Use it on home, cabin, RV and off-grid systems where the array wiring lands on a terminal that takes a lug.
The MC4 compatible connector and the lug come installed, so the cable is ready to plug in at the array and fasten at the other end. You skip stripping, crimping and the tools that go with them.
The conductor uses 75 tinned copper strands (75/0.30 TC) with a conductor resistance of 3.59 Ω/km. AIMS lists an allowable current of 49.6A and a 600 V rating.
XLPE insulation and a 6.4 mm jacket give the cable a 90 °C rating in dry or wet locations and an ambient range of -40 °C to +90 °C (-40 °F to +194 °F). It withstands short circuit temperatures up to 250 °C (482 °F). AIMS specifies UL4703 PV cable.
Panel to terminal runs. Plug the connector into a panel or array lead and fasten the lug at a terminal in your equipment area.
RV and van systems. Thirty feet covers a run from roof panels down to equipment inside the coach or van.
Cabin and off-grid builds. Bring panel output from a rack or roof to a battery and controller area with a finished end at each side.
Cut end wire leaves the equipment end open so you can trim it and terminate it yourself. The lugged end version arrives with the lug already installed, which saves a step when your terminal takes a lug and 30 feet suits your route.
Both options use the same 30 foot cable and lugged end. The only difference is the MC4 compatible connector, so choose the one that mates with your panel lead.
AIMS doesn't publish the lug's stud size for these cables. If your controller, bus bar or other terminal needs a specific lug size, ask the Outbound Power team to confirm the fit before you order.
Make sure 30 feet reaches along the actual route with some slack. Keep bends to at least 5 times the outer diameter, and keep your array within the cable's 600 V and 49.6A ratings.
Choose the gender opposite the panel lead you're connecting to. A female connector mates with a male lead, and a male connector mates with a female lead.
Both options are 30 feet long. AIMS lists the 30 foot cable at 2 lbs.
The 10 AWG PV wire is rated 600 V with a 49.6A allowable current and a 90 °C dry or wet temperature rating.
The male option includes the same cable with a male MC4 compatible connector.
The AIMS Power 10 AWG MC4 Compatible Lugged End PV Wire gives you 30 feet of 600 V, 49.6A PV cable with a finished end on each side. If you'd like help choosing the connector or checking the lug fit, the Outbound Power team is happy to help.
AIMS Power 30 Foot 10 AWG PV Wire With MC4 Compatible Connector to Lugged End Specifications |
|
|---|---|
| Cable | |
| Wire Gauge | 10 AWG |
| Length | 30 ft |
| Cable Type | PV cable, UL4703 |
| Conductor | Tinned copper, OD 2.59 mm |
| Stranding | 75/0.30 TC |
| Conductor ID | 3 mm |
| Insulation | XLPE, 0.72 mm thick |
| Jacket OD | 6.4 mm |
| Conductor Resistance | 3.59 Ω/km |
| Bending Radius | At least 5 x outer diameter |
| Cable Weight | 2 lbs (30 ft) |
| Ends and Connectors | |
| Connector End | MC4 compatible connector, female or male by option |
| Other End | Lugged end (ring lug) |
| Ends Installation | Factory installed |
| Options on This Page | |
| Female MC4 Compatible, 30 Feet | PVFL30FT10AWG |
| Male MC4 Compatible, 30 Feet | PVML30FT10AWG |
| Ratings | |
| Voltage Rating | 600 V |
| Allowable Current | 49.6A |
| Temperature Rating | 90 °C (194 °F) dry or wet |
| Ambient Temperature (> 25 Years, TÜV) | -40 °C to +90 °C (-40 °F to +194 °F) |
| Max Short Circuit Temperature | 250 °C (482 °F) |
| Standard | UL4703 |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
