Found the same price or less? Just ask & we'll beat it.
Authorized AIMS Power Dealer
Friendly Lifetime Support
The AIMS Power 8000 Watt 12 Volt Modified Sine Power Inverter converts 12 volt DC battery power into 8000 watts of continuous 120 volt AC power, with a 16,000 watt surge rating and 66 amps of AC output. It is one of the most powerful ways to bring AC power to a 12 volt platform, connecting to most standard 12 volt vehicle electrical systems without costly upgrades. Fleet vehicles, service trucks, food trucks, and other mobile businesses use inverters like this to run serious equipment quietly, and it is equally suited to home backup power, solar systems, RVs, marine power, and job sites.
With 8000 watts of continuous output and a 16,000 watt surge, this inverter can run multiple tools, pumps, motors, and appliances at once.
A quadruple AC receptacle provides plug-in convenience, with a UL maximum recommendation of 1500 watts per outlet. To use the inverter's full capacity, connect larger loads through the AC direct connect terminal block.
The front-panel volt meter monitors battery voltage, and the amp meter shows current use, which is the rate at which your battery is drained. At this power level, that information is essential.
The inverter is pre-wired for a remote on/off switch and has a pre-slotted mounting plate. Efficiency reaches 95% at one-third load and 90% at full load, with a no-load draw under 1.3 DC amps. A thermally controlled fan and aluminum case manage heat.
Versus a large portable generator. A generator in this power class is loud, burns fuel, and needs regular maintenance. This inverter delivers quiet, emission-free power from batteries, a cleaner option around customers.
Versus 24 or 48 volt systems. At 8000 watts, a 12 volt system carries extremely high DC current. Higher-voltage systems reduce current and cable size. When your platform is a 12 volt vehicle, though, this inverter lets you work with what you have.
Versus pure sine wave inverters. Modified sine wave with phase correction runs most tools, pumps, motors, and appliances economically. For sensitive electronics, consider pure sine wave models.
This may be a good fit if
AIMS Power states it requires two sets of 4/0 cable and recommends two 500 amp fuses to run at 8000 watts. Contact us to confirm cable lengths for your installation.
Each outlet is recommended for up to 1500 watts, so connect larger loads through the AC direct connect terminal block.
Yes. It is pre-wired for a remote on/off switch.
AIMS Power backs this inverter with a 2 year warranty and free lifetime technical support.
The AIMS Power 8000 Watt 12 Volt Modified Sine Power Inverter brings exceptional AC capacity to 12 volt vehicles and systems, with monitoring and protections to match. At Outbound Power, we help customers plan the batteries, 4/0 cabling, fusing, and charging required for high-output systems. Talk with our team before you install, and we will help you get every detail right.
AIMS Power 8000 Watt 12 Volt Modified Sine Power Inverter Specifications |
|
|---|---|
| Continuous Output Power | 8000 Watts |
| Surge Power Capability (Peak Power) | 16,000 Watts |
| AC Output Current | 66 Amps |
| DC Input / Operating Voltage | 10–15 Volts |
| Output Voltage | 120 Volts AC ±10% |
| Output Waveform | Modified Sine Wave With Phase Correction |
| Output Frequency | 60 Hz ±1 Hz |
| AC Output | Quadruple Type 2 (3-Prong) Receptacle, AC Direct Connect Terminal Block |
| UL Maximum Recommended Per Outlet | 1500W |
| Meters | Front Panel Volt Meter and Amp Meter |
| Full Load Efficiency | 90% |
| 1/3 Load Efficiency | 95% |
| No Load Current | < 1.3 DC Amps |
| Battery Low Voltage Alarm | 10.5 ±0.5 Volts |
| Battery Low Voltage Shutdown | 10.0 ±0.5 Volts |
| Low Input Voltage Shutdown | 10V |
| High Input Voltage Protection | 15V–17V |
| No Load Minimum Operating Temperature | 30°F |
| Full Load Maximum Operating Temperature | 140°F |
| Required Cabling | 2 Sets of 4/0 Cable, 500 Amp Fuse (x2) Recommended |
| Indicators | Over Temperature LED, Overload LED |
| Cooling | Thermally Controlled Fan, Aluminum Case |
| Protections | Over Temperature, Overload, AC Output Short Circuit, Internal Fuse, Auto Reset on Most Faults |
| Other Features | On/Off Switch, Pre-Wired for Remote On/Off Switch, Pre-Slotted Mounting Plate |
| Product Size (L × W × H) | 19.02" × 7.76" × 6.02" |
| Unit Weight | 19.8 lbs |
| Boxed Weight | 24 lbs |
| Warranty | 2 Years, Plus Free Lifetime Tech Support |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder
