The AIMS Power Armadillo Expedition Solar Kit Pairs 800W of N-Type Solar With an All-in-One 5.58 kWh Power System for Fewer Wires and Faster Installs
The AIMS Power Armadillo Expedition Solar Kit (ECARMADILLO) is a complete solar power system built around AIMS's onboard all-in-one solar generator. One enclosure holds a 5.58 kWh lithium battery bank, a 3000 watt pure sine inverter charger, integrated 50 amp transfer switching and multiple charging inputs. AIMS adds four 200W N-type solar panels, panel brackets, a solar fuse, PV wire and an MC4 type entry gland.
AIMS designed the Armadillo for installers and owners who need high-capacity energy for backup power, remote work sites, mobile operations and demanding off-grid use. It's built for fixed installations, such as an RV compartment or a service truck, and puts performance and long-term capability ahead of lightweight portability.
AIMS Power Armadillo Expedition Solar Kit Features
Battery, Inverter Charger and Transfer Switch in One Enclosure
The all-in-one unit combines lithium battery storage, the inverter charger, transfer capability, charging inputs and system controls in a single enclosure. AIMS notes that this removes much of the wiring, fusing and component mounting a traditional multi-component system needs, for a cleaner and more organized installation.
800W of N-Type Solar Charging
Four 200W N-type monocrystalline solar panels give the kit 800 watts of solar. Each panel measures 49.2 x 30.12 x 1.18 in and has MC4 type connectors on 31.5 in leads. The all-in-one unit has four PV inputs, each with its own circuit breaker.
5.58 kWh of Lithium Storage That Can Grow
The built-in 5.58 kWh lithium battery bank handles large appliances, tools, electronics, pumps and essential household devices. Unlike many fixed-capacity solar generators, the Armadillo accepts up to eight additional 420Ah batteries through its battery expansion port, for more than 50 kWh of total storage.
3000W Pure Sine Inverter Charger With 50 Amp Transfer
The integrated 3000 watt pure sine inverter charger, with 50 amp transfer switching, delivers dependable AC power for appliances, tools, electronics and critical systems. Status LEDs show line mode, inverter mode, charging state, overload and over-temperature conditions.
Four Ways to Recharge
Recharge the system from solar, a generator, a vehicle alternator or grid power. AIMS states that it recharges in under four hours using generator, grid or maximum solar input, with even faster recovery when you combine charging sources.
Built-In Monitoring and Communication Ports
Battery state of charge LEDs show 25%, 50%, 75% and 100% levels, along with alarm and on indicators. The unit also has CAN and RS485 communication ports, a DC load port with its own breaker and a battery charging input with its own breaker.
Real-World Applications
Mobile grooming and salons. AIMS lists mobile dog grooming and luxury salon rigs among the setups this system suits, with power for tools such as hair dryers.
Food trucks and espresso carts. Run coffee makers, an electric kettle, a microwave or an air fryer from stored solar energy.
Mobile tech, media and command vehicles. Keep laptops, Starlink, mobile hotspots, routers and monitors powered in the field.
Construction sites and service rigs. AIMS names on-site construction and framing, mobile mechanics and service rigs, and multi-bay fleet charging as common uses.
RVs and whole-coach power. AIMS lists off-grid air conditioning and whole-coach appliance power among the Armadillo's applications.
Practical Comparison
Armadillo Versus a Multi-Component Solar System
A traditional system means mounting and wiring a separate battery bank, inverter charger, transfer switch and charge controller. The Armadillo combines them in one enclosure, so there are fewer wires, fewer connections and fewer components to install.
Armadillo Versus a Fixed-Capacity Solar Generator
Many solar generators can't add storage. The Armadillo starts at 5.58 kWh and accepts up to eight additional 420Ah batteries, so you can scale beyond 50 kWh as your needs grow.
Armadillo Versus a Fuel Generator
AIMS designed the Armadillo to deliver long-duration power without the noise, fuel or maintenance of a traditional generator. A generator can still serve as one of its charging sources when you need faster recovery.
Buyer Guidance
Plan Panel Space and Mounting
AIMS says you need about 46 square feet for the four solar panels. The all-in-one unit measures 29.25 x 21.75 x 15.75 in and is meant for a fixed location, so plan a secure spot with room to reach its front panel. If you plan to add expansion batteries later, leave room for them near the unit.
Match Your Loads to 3000W
Keep the combined wattage of everything running at once under the 3000 watt inverter rating. AIMS lists a small AC unit, a ceramic space heater, a single-burner induction cooktop, a standard microwave, an electric kettle at 1,000W to 1,500W, a hair dryer, a toaster, a CPAP and a cordless drill charger among common uses. Runtime depends on what you run and the battery's state of charge.
This May Be A Good Fit If
- You want battery, inverter and transfer switch in one unit
- You run a mobile business or service vehicle
- You may expand storage beyond 50 kWh later
- You have about 46 square feet for panels
Common Questions
How Much Space Do the Solar Panels Need?
AIMS says to plan for about 46 square feet for the four 200W N-type panels.
Can I Add More Battery Storage Later?
Yes. AIMS states that you can connect up to eight additional 420Ah batteries for more than 50 kWh of total storage. The Outbound Power team can help you choose compatible batteries.
How Can I Recharge the System?
You can charge from solar, a generator, a vehicle alternator or grid power, and combining sources speeds up recovery.
Is the Armadillo Portable?
Not in the carry-around sense. AIMS built it with heavy-duty industrial construction for fixed installations and demanding workloads, and it prioritizes performance over lightweight portability.
What Wiring Comes With the Kit?
You get 20 ft PV wires with 20 ft extenders, an entry gland with MC4 type connectors and 10 ft leads, a solar fuse and solar panel brackets.
What's Included
- 4 x 200W N-Type Solar Panels
- 1 x All-in-One Solar Generator (5.58 kWh Lithium, 3000W Pure Sine Inverter Charger)
- 1 x Solar Fuse
- 1 x Set of 20 Ft PV Wires and 20 Ft Extenders
- 1 x Set of Solar Panel Brackets
- 1 x Entry Gland With MC4 Type Connectors and 10 Ft Leads
Integrated Solar Power for Serious Mobile and Off-Grid Work
The AIMS Power Armadillo Expedition Solar Kit brings 800 watts of N-type solar, 5.58 kWh of expandable lithium storage and a 3000 watt pure sine inverter charger together in a system with fewer parts to wire. If you'd like help planning panel placement, sizing your loads or adding batteries, the Outbound Power team is happy to help.
AIMS Power Armadillo Expedition Solar Kit | 800W Solar, 3000W Inverter Charger, 5.58kWh Lithium Battery Specifications
|
| Kit Contents |
| Solar Panels |
4 x 200W N-type solar panels (800W total) |
| All-in-One Unit |
1 x all-in-one solar generator |
| Solar Fuse |
1 |
| PV Wire |
20 ft PV wires and 20 ft extenders |
| Panel Brackets |
Solar panel brackets |
| Entry Gland |
MC4 type connectors, 10 ft leads |
| Panel Space Needed |
About 46 sq ft |
| Solar Panels |
| Rated Power (Each) |
200W |
| Quantity |
4 |
| Total Solar Power |
800W |
| Cell Type |
N-type monocrystalline |
| Dimensions (Each) |
49.2 x 30.12 x 1.18 in |
| Connectors |
MC4 type, 31.5 in leads |
| All-in-One Solar Generator |
| Battery |
5.58 kWh lithium |
| Inverter Charger |
3000W pure sine |
| Transfer Switching |
Integrated, 50 amp |
| Charging Sources |
Solar, generator, alternator, grid |
| Recharge Time |
Under 4 hours using generator, grid or maximum solar input |
| Expansion |
Up to 8 additional 420Ah batteries, more than 50 kWh total |
| PV Inputs |
4, each with its own circuit breaker |
| External Battery Input |
12 VDC |
| Inverter Charger Indicators |
Overload, over temperature, alarm, float charge, fast charge, inverter mode, line mode |
| Solar Charger Indicators |
Charging, fault/warning, wiring fault, power on |
| Battery Indicators |
State of charge 25%, 50%, 75%, 100%, alarm, on |
| Communication Ports |
CAN, RS485 |
| DC Connections |
Battery charging input, battery expansion port, DC load port |
| Circuit Breakers |
PV inputs (4), AC outputs (2), battery charging, DC load |
| Construction |
Heavy duty industrial, for fixed installations |
| Dimensions |
29.25 x 21.75 x 15.75 in |
| Cables and Hardware |
| Solar Fuse |
Included |
| PV Wires |
20 ft, plus 20 ft extenders |
| Entry Gland |
MC4 type connectors, 10 ft leads |
| Panel Brackets |
Included |