Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The AIMS Power Badger Expedition Solar Kit (ECBADGER) is a complete small solar system that's ready to install out of the box. It includes a 120W monocrystalline solar panel, a 20 amp PWM charge controller, a 2000W pure sine inverter with 8 ft cables and two 6V 225Ah AGM deep cycle batteries that store 3.1 kWh. AIMS adds three fuses, 15 ft PV wires, mounting brackets and an MC4 type entry gland with 10 ft leads.
AIMS built the Badger for RVs, vans, buses and small off-grid systems. It keeps your batteries charged from the sun and gives you stored energy to run mid-size appliances for short periods, which makes it a good match for short trips, mobile setups and light off-grid living.
The 120W monocrystalline panel measures 35 3/8 x 26 5/16 x 1 1/8 in and weighs 15 lb, so it fits where space is limited. It has tempered glass, an IP65 junction box and MC4 compatible connectors. Plan on about 8 square feet of mounting space.
The PWRI200012120S inverter delivers 2000W continuous and 4000W of surge for 40 milliseconds, with less than 3% THD and over 90% efficiency. It has dual GFCI outlets, an AC direct connect terminal, a 5 VDC USB port rated at 2.1A and a port for an optional REMOTEHF on/off remote. AIMS lists it as ETL listed to UL 458 and CSA 22.2 No 107.1.
Two AGM6V225G batteries give you 225Ah and 3.1 kWh of storage, so you aren't limited to daylight hours. Each is a 6V valve regulated, absorbent glass mat deep cycle battery labeled maintenance free, with a monthly self-discharge rate under 3% at 25°C.
The SCC20APWM charge controller manages charging in bulk, boost and float stages. Its LCD shows real-time system information, and it supports sealed, gel, AGM, flooded, LiFePO4 and Li(NiCoMn)O2 batteries. It also has a 5 VDC 1A USB port, a DC load port and battery temperature compensation.
The inverter shuts down for low battery, high input voltage, overload, short circuit and over temperature, and it's conformal coated to protect against moisture and corrosion. The controller adds protection against PV and battery reverse polarity, night reverse charging, overcharge and over-discharge.
AIMS notes that more batteries and another panel may be added for longer run time and faster charging, so the Badger can grow with your needs.
RVs, vans and buses. Keep house batteries charged and run a coffee maker, microwave or toaster for short periods at camp.
Mobile tech and media production. Power laptops, a desktop PC, chargers and production gear from a vehicle or trailer.
Field offices and point-of-sale hubs. AIMS lists field office setups, base camp electronics and point-of-sale and marketing hubs among common uses.
Job sites with power tools. Run a circular saw, heat gun or small portable air compressor for short periods.
Off-season maintenance. The panel and controller keep batteries charged while your rig sits between trips.
A modified sine inverter produces a stepped waveform. The Badger's inverter puts out a pure sine wave, which AIMS describes as the same quality as utility power and suitable for most electrical devices, appliances and tools.
Flooded lead-acid batteries typically need periodic maintenance. The Badger's AGM batteries are valve regulated and labeled maintenance free, which suits mobile setups.
Building a system yourself means matching a panel, controller, inverter, batteries, fuses and wire. AIMS pre-bundles these components to work together, which reduces compatibility concerns and install time.
The inverter is rated 2000W continuous. Add up everything you'll run at the same time and stay under that rating. AIMS notes that equipment can need 3 to 5 times its running wattage at start-up, and that deep cycle batteries last longer when they're only depleted to 50% of capacity. Runtime depends on your loads and the batteries' state of charge.
Connect the battery to the charge controller first, then the PV array, then any DC load. Connect the inverter directly to the battery, not to the controller's load port, and install the battery fuse within 6 inches of the battery. For the inverter, AIMS recommends a 200 amp inline DC fuse, 2 AWG or larger DC cable and 12 inches of open space around the unit.
AIMS says to plan for about 8 square feet for the 120W panel.
AIMS lists a small microwave, an induction cooktop, a small air conditioner, a coffee maker, a toaster oven, a pressure cooker, a hair dryer, a standard vacuum, a desktop PC, a circular saw and a small air compressor among common uses, run for short periods.
Yes. AIMS notes that more batteries and a panel may be added for longer run time and faster charging. The Outbound Power team can help you choose parts that match.
The SCC20APWM supports sealed, gel, AGM, flooded, LiFePO4 and Li(NiCoMn)O2 batteries in 12V or 24V systems.
AIMS lists the kit warranty as 2 to 25 years depending on the product. The inverter and the charge controller each carry a 2 year warranty from the date of purchase.
The AIMS Power Badger Expedition Solar Kit brings together a space-saving 120W panel, a 20 amp PWM charge controller, a 2000W pure sine inverter and 3.1 kWh of AGM storage with the fuses, wire and brackets to connect them. If you'd like help checking your loads, planning the install or expanding the system, the Outbound Power team is happy to help.
AIMS Power Badger Expedition Solar Kit | 120W Solar, 2000W Inverter, 3.1kWh AGM Battery Specifications |
|
|---|---|
| Kit Contents | |
| Solar Panel | 1 x 120W solar panel |
| Mounting Brackets | Included |
| Charge Controller | 1 x 20 amp charge controller |
| Inverter | 1 x 2000W pure sine inverter with 8 ft cables |
| Batteries | 2 x 6V 225Ah AGM deep cycle, 3.1 kWh |
| Fuses | Inverter to battery fuse, charge controller to battery fuse, solar fuse |
| PV Wires | 15 ft |
| Entry Gland | MC4 type with 10 ft leads |
| Panel Space Needed | About 8 sq ft |
| Solar Panels | |
| Model | PV120MONO |
| Quantity | 1 |
| Maximum Power (Pmax) | 120W |
| Voltage at Max Power (Vmp) | 20.7V |
| Current at Max Power (Imp) | 5.8A |
| Open Circuit Voltage (Voc) | 24.3V |
| Short Circuit Current (Isc) | 6.3A |
| Module Efficiency | 20% |
| Power Tolerance | 0/+5W |
| Cell Type | Monocrystalline (3x12) |
| Front Material | Tempered glass |
| Junction Box | IP65 |
| Connector | MC4 compatible |
| Maximum System Voltage | 600VDC |
| Maximum Series Fuse | 10A |
| Operating Temperature | -40°C to +85°C |
| Dimensions | 35 3/8 x 26 5/16 x 1 1/8 in |
| Weight | 15 lb |
| Inverter | |
| Model | PWRI200012120S |
| Continuous Power | 2000W |
| Surge Power | 4000W for 40 milliseconds |
| DC Input Voltage | 12V (9.8-16V) |
| Output Waveform | Pure sine |
| AC Output Current | Up to 16 amps |
| THD | Less than 3% |
| Efficiency | Over 90% |
| No Load Current | 0.9A, switch on |
| AC Outlets | Dual GFCI |
| AC Hardwire | AC direct connect terminal |
| USB Output | 5 VDC, max 2.1A |
| Remote Port | Optional REMOTEHF on/off remote |
| Battery Low Alarm | DC 9.8 +/- 0.3V |
| Battery Low Shutdown | DC 9.5 +/- 0.5V |
| Input Over Voltage Shutdown | 16 +/- 0.5 VDC |
| Over Temperature Protection | 149°F +/- 8°F |
| Operating Temperature | 32-113°F +/- 8°F (automatic recovery/shutdown) |
| Recommended Ambient Temperature | 32-104°F, preferred 50-77°F |
| Cooling | Thermally controlled fan, starts at about 104°F case temperature |
| Marine Protection | Conformal coated against moisture and corrosion |
| Inline DC Fuse | 200 amp recommended |
| Recommended DC Cable | 2 AWG or larger |
| Clearance | 12 in around the inverter |
| Cables | 8 ft (kit) |
| Dimensions | 17 1/8 x 9 7/16 x 3.8 in |
| Weight | 12 lb |
| Certification | ETL listed to UL 458 and CSA 22.2 No 107.1 |
| Batteries | |
| Model | AGM6V225G |
| Type | AGM deep cycle, valve regulated, maintenance free |
| Quantity | 2 |
| Voltage (Each) | 6V |
| Capacity (Each) | 225Ah at 20 hour rate |
| Total Stored Energy | 3.1 kWh |
| Battery Group | GC2 |
| Cells Per Unit | 3 |
| Max Charging Current | 67.5A |
| Float Charging Voltage | 6.80-6.90V at 25°C |
| Cycle Use Voltage | 7.30-7.40V at 25°C |
| Max Discharge Current | 2250A (5 sec) |
| Cold Cranking Amps | 760A |
| Internal Resistance | 2.1 mOhm or less (fully charged, 25°C) |
| Terminal | M8, torque 10-12 N-m |
| Self-Discharge | Less than 3% per month at 25°C |
| Operating Temperature | Discharge -20 to 60°C, charge 0 to 50°C, storage -20 to 60°C |
| Container | ABS UL94-HB |
| Dimensions (Each) | 10.25 x 7.09 x 9.65 in (10.5 in total height with terminals) |
| Weight (Each) | Approx. 31.5 kg |
| Charge Controller | |
| Model | SCC20APWM |
| Charging Type | PWM, 3-stage (bulk, boost, float) |
| System Voltage | 12V/24V |
| Max Charging Current | 20A |
| Max Discharging Current | 20A |
| PV Max Input Voltage | 23V (12V) / 55V (24V) |
| Battery Types | Sealed, gel, AGM, flooded, LiFePO4, Li(NiCoMn)O2, user |
| Display | LCD |
| USB Output | 5 VDC, 1A |
| Load Output | DC load port |
| Temperature Compensation | -24 mV/°C for 12V system |
| Self-Consumption | Less than 10mA |
| Working Temperature | -20°C to 55°C |
| Terminals | 10 sq mm |
| Dimensions | 6.61 x 3.6 x 1.35 in |
| Weight | 11 oz |
| Cables and Hardware | |
| Inverter Cables | 8 ft |
| PV Wires | 15 ft |
| Entry Gland | MC4 type, 10 ft leads |
| Inverter to Battery Fuse | Included |
| Charge Controller to Battery Fuse | Included |
| Solar Fuse | Included |
| Mounting Brackets | Included |
| Warranty | |
| Kit | 2 to 25 years, product specific |
| Inverter | 2 years from date of purchase |
| Charge Controller | 2 years from date of purchase |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
